USAutomatic Low Current Receiver Installation Guide

USAutomatic Low Current Receiver

Zikomo posankha izi.
Chonde werengani bukuli mosamala musanayike mankhwalawa.

Mawu Oyamba

• Chinthu chochepa chamakono cholandila 030205 ndi cholandila 2 cholandila, chikugwira ntchito pa 433,92 Mhz mu AM/ASK modulation.
• Amapangidwa kuti azitsekera zokha ndi machitidwe odana ndi burglar omwe amamwa pang'ono kwambiri.
• The operating frequency is among the European harmonised frequencies. The antenna is connected with a F- type connector.
• Zotulutsa zopatsirana zimangokhala ndi NO kukhudzana ndi wamba wofupikitsidwa ku Ground.
• Njira yogwiritsira ntchito K1 ndi Pulse ndipo ya K2 ikhoza kukhala Pulse kapena Latch. Mphamvu yamagetsi ndi 12 Vdc.
• Gawo la IP la 2X limalola kukhazikitsa m'nyumba zokha.
• Zogulitsazo zimagwirizana kwathunthu ndi EMC European Regulations (CE) ndi FCC Part 15 Regulations.

Ma Transmitters Ogwiritsidwa Ntchito

• 2-button transmitter – Part # 030210
• 4-button transmitter – Part # 030212

Mfundo zaukadaulo

• Mtundu wolandila: Superheterodyne.
• Kusintha: AM/ASK.
• pafupipafupi ntchito: 433,92 MHz.
• Oscillator pafupipafupi: 6,6128 MHz.
• Mafupipafupi apakati: 10,7 MHz.
• Kumverera (kwa chizindikiro chabwino): -115 dBm.
• Kusokoneza kolowera: 75 Ohm.
• Wonjezerani voltage: 12 dc ( ± 10% ).

Mayamwidwe apano:

• pa mpumulo: 1.5 mA
• ndi 1 relay okondwa: 7 mA
• Chiwerengero cha ma relay: 2 (1NO, 1NO ).
• Relay ntchito mode Pulse / Latch
• Commutable max power: 24W or 24VA.
• Kuchuluka kwa kukumbukira (tx makiyi): 42.
• Operating temperature: -4 ÷ +158 °F.
• Makulidwe: 4.13 x 1.77 x 1.1 mkati
• Kulemera kwake: 2.29 oz
• Gawo la Chitetezo cha IP: 2X

Kulandilaview

• P1: batani la P1
• P2: batani la P2
• LD: Green Led
• CON: I/O Connector
• K1: Kutulutsa kwa 1
• F: Cholumikizira chamtundu wa F
• K2: Kutulutsa kwa 2

Chithunzi cha wiring

Mbali zazikulu

• Kupumula kochepa kwambiri komwe kumagwiritsidwa ntchito
• 42 makiyi osungira osungira
• Key transmitter imodzi kapena kufufuta kukumbukira kwathunthu
• Makina ogwiritsira ntchito osinthika a 2 relay: kwakanthawi, kutsekeka
• Easy transmitter programming

NTCHITO YOPATSIRA NTCHITO NDI WOLANDIRA

• The Transmitter and Receiver operate at 433 MHz. The receiver can store up to 22 unique transmitter codes.

Kukonzekera kwa Transmitter:
(Ndikofunikira kuti dipswitches zisinthidwe kuchokera pazokhazikika)

1. Tsegulani chitseko cha chipinda cha batri ndikupeza ma dipswitches.
2. Sinthani ma dipswitches kukhala makonda omwe mukufuna. Lembani kuti mudzagwiritse ntchito mtsogolo.

Transmitter Kumanzere Kwa Madongosolo Olandila:
(muyezo Open/Stop/ Close function)

1. Press and hold the left transmitter button down. Red light on the transmitter should be on.
2. Pa wolandila, kanikizani batani la P1 mpaka kuwala kobiriwira kwa LD kuwonekera.
3. Tulutsani mabatani onse awiri. Kutumiza batani lakumanzere kupita ku mapulogalamu olandila kwatha.

Transmitter Right Button to Receiver Programming:
(Gwirani-Chipata-Chotsegula) (Pokhapokha ngati chotsekera pagalimoto chayatsidwa)
The 2-channel receiver allows for programming the P2 relay from momentary mode (default) to latching mode. The transmitter right button can then be programmed to hold the gate open, overriding the auto-close feature, if activated.

1. Press and hold the right transmitter button down. Red light on the transmitter should be on.
2. Pa wolandila, kanikizani batani la P2 mpaka kuwala kobiriwira kwa LD kuwonekera.
3. Tulutsani mabatani onse awiri.
4. Kutumiza batani lakumanja ku pulogalamu yolandila kwatha.
5. Tsopano muyenera kuyika wolandila P2 kuti alowe munjira yomwe ili pansipa.

Receiver Programming:
Relay P2 programming kuchokera kwakanthawi kupita ku latching mode (kuti mutsegule chipata)

1. Pa wolandila, kanikizani batani la P2 mpaka kuwala kobiriwira kwa LD kubwere, ndikumasula. Kuwala kwa Green LD kuyenera kukhala kokhazikika.
2. Pomwe kuwala kobiriwira kwa LD kuli koyaka, kanikizani batani la P1 pansi ndikumasula. Kuwala kwa Green LD kuyenera kung'anima. Latch mode yakhazikitsidwa.

Kutsimikizira Receiver P2 relay idakonzedwa kuti ikhale yolumikizira:

1. Pa wolandila, kanikizani batani la P2 mpaka kuwala kobiriwira kwa LD kubwere, ndikumasula.
2. Kuwala kwa Green LD kuyenera kung'anima. Ngati kuwala kwa LD kobiriwira kuli kokhazikika, bwerezani gawo la Receiver Programming pamwambapa.

Kukhazikitsanso wolandila P2 kutengera kwakanthawi:

1. Pa wolandila, kanikizani batani la P2 mpaka kuwala kobiriwira kwa LD kubwere, ndikumasula. Kuwala kwa Green LD kuyenera kung'anima.
2. Pomwe kuwala kobiriwira kwa LD kuli koyaka, kanikizani batani la P1 pansi ndikumasula. Kuwala kwa Green LD kuyenera kukhala kolimba. Momentary mode yakhazikitsidwa.

Erasing Single Transmitter from Receiver Memory:
Zokonda za dipswitch za transmitter kuti zichotsedwe ziyenera kudziwika.
Ngati zikudziwika tsatirani izi.

1. Khazikitsani ma dipswitches mu transmitter kuti agwirizane ndi masinthidwe a code transmitter kuti mufufute.
2. Dinani ndikugwira batani lakumanzere la transmitter.
3. Pa wolandila kanikizani batani la P1 mpaka kuwala kobiriwira kwa LD kuwonekera.
   Kenako amasule onse awiri.
4. Dinani ndikugwira batani lakumanja la transmitter.
5. Pa wolandila kanikizani batani la P2 mpaka kuwala kobiriwira kwa LD kuwonekera.
   Kenako amasule onse awiri.
6. Transmitter tsopano yafufutidwa kuchokera pamtima wolandila.

Erasing all Transmitters from Receiver Memory:

1. Dinani batani la P2 pa wolandila mpaka kuwala kobiriwira kwa LD kuwonekera. Kenako masulani batani la P2.
2. Pamene kuwala kwa LD kuli pa kanikizani mabatani a P1 ndi P2 nthawi imodzi ndikugwira mpaka kuwala kobiriwira kwa LD kukuyamba kuphethira pang'onopang'ono.
3. Iyenera kuphethira ka 4 ndiye kuti ma code transmitter onse achotsedwa.

CHISONYEZO CHA NAMBARI YOTSATIRA

• Ndizotheka kuwonetsa makiyi angati otumizira omwe amasungidwa mu kukumbukira.
• Nambala ikuwonetsedwa, muzolemba za binary ( 0 kapena 1 ), ndikutsatizana kwa kuwala kotsogolera.
• Kung'anima kwakung'ono (½ sekondi) kwa LD kumapereka "0".
• Kuwala kwautali (1 sekondi) ya LD kumapereka "1".
• Kutsatizana kwathunthu kumapangidwa ndi kuwala kwa 6 ndi kung'anima komaliza (2 masekondi).
• Malinga ndi malo ake, kung'anima kulikonse kumakhala ndi "kulemera" kosiyana.

First flash: 2 = 1

1. Second flash: 2 = 2
2. Third flash: 2 = 4
3. Fourth flash: 2 = 8
4. Fifth flash: 2 = 16
5. Sixth flash: 2 = 32

Ndondomeko

1. Pitirizani P1 kapena P2 kukanikizidwa mpaka LD kuyatsa.
2. Tulutsani batani ndikukankhira P2 kwakanthawi LD isanazime.

Panthawi imeneyi, kuwunika kumayamba.
Yang'anirani ndondomekoyi kuti muwerengere nambala ya decimal yofananira, monga momwe tawonetsera mu ex yotsatirayiamples.

Es. N° 1: Memory mulibe

• Zolemera 1 2 4 8 16 32 Kumaliza Kutsata
• Kutsata: _ _ _ _ _ ________
• Final number : 0 + 0 + 0 + 0 + 0 + 0 = 0

Es. N° 2: 5 makiyi transmitter

• Zolemera 1 2 4 8 16 32 Kumaliza Kutsata
• Kutsata: ___ _ ___ _ _ _ ________
• Nambala yomaliza: 1+ 0 + 4 + 0 + 0 + 0 = 5

Es. N° 3: 12 makiyi transmitter

• Zolemera 1 2 4 8 16 32 Kumaliza Kutsata
• Kutsatira: _ _ __ ___ _ _ ________
• Nambala yomaliza: 0 + 0 + 4 + 8 + 0 + 0 =12

CHItsimikizo

• USAutomatic, LLC warrants this product to be free of defects in materials and workmanship for 1 YEAR. For a period of 1 YEAR following purchase, USAutomatic, LLC. will repair or replace the product free of charge, including parts, shop labor and return to customer shipping and handling.
• This 1-year warranty does not cover the plastic case from normal wear or damage due to misuse.
• To have the product sent for warranty consideration, it must be returned with the proof of purchase and a return authorization number. To obtain a return authorization number, please call 1-888-204-0174 for assistance. The return authorization number must be clearly marked on the outside of the return package or it may not be accepted.

CONTACT

• www.usautomaticgateopeners.com
• (888)-378-1170
• sales@usautomaticgateopeners.com