SMARTRISE C4 Link 2 Programmer

Zathaview

Chikalatachi chimapereka malangizo atsatane-tsatane pakutsitsa, kukhazikitsa, ndi kugwiritsa ntchito Link2 Programmer yokhala ndi olamulira a C4. Imafotokoza momwe mungayikitsire mapulogalamu pa C4 controller pogwiritsa ntchito Link2 Programmer.

Required Tools for Software Programming

Zida zotsatirazi ndizofunika kupanga pulogalamuyi:

1.  Laputopu yokhala ndi makina ogwiritsira ntchito Windows.
2. Pulogalamu ya Link2.
3. Controller software: The original controller software is stored on a flash drive inside the white job binder. If the flash drive is missing or contains outdated prints and software, Smartrise can provide a webulalo kuti mupeze mapulogalamu aposachedwa ndi zosindikiza.

Application Download Instructions

Kuti mutsegule pulogalamu pa Smartrise controller, pulogalamu yamapulogalamu iyenera kutsitsidwa ku laputopu. Pulogalamuyi imapezeka pa flash drive. Tsatirani izi kuti mutsitse pulogalamu ya C4 Link2 Programmer:

1. Tsegulani flash drive.
2. Navigate to (5) – Smartrise Programs and open the folder
3. Pezani ndi kutsegula chikwatu cha C4 Programmer.
4. Download and run both applications on the laptop. Some laptops may have firewalls that prevent applications from downloading. For assistance, contact the system administrator.
5. Once completed, the two applications should appear on the desktop.
   NOTE: MCUXpresso does not need to be opened, only installed on the laptop.

Software Loading Instructions

Kuti muwonetsetse kugwira ntchito moyenera, pulogalamu yowongolera iyenera kukwezedwa pawowongolera wa Smartrise pogwiritsa ntchito Link2 Programmer. Tsatirani zotsatirazi kuti mumalize ntchitoyi:

1. Connect the Link2 Programmer to the laptop via the USB port.
2. Open the C4 Link2 Programmer by double-clicking its icon. The application will automatically update to the latest version if connected to the internet. Ensure the application is up to date before proceeding.
3. Sakatulani pulogalamu yowongolera:
   1. Open (1) – Controller Software.
   2. Sankhani chikwatu chokhala ndi dzina lantchito.
   3. Sankhani Galimoto kuti mulowetse mapulogalamu.
   4. Dinani Sankhani Foda pansi pa zenera.
   5. Select the processor to update using the dropdown menu. Processors can be updated in any order:
      • MR A: MR MCUA
      • MR B: MR MCUB
      • SRU A: CT ndi COP MCUA
      • SRU B: CT ndi COP MCUB
      • Riser/Kukula: Riser/Expansion board

Kulumikizana kwa processor kungapezeke pa bolodi.

Start the software loading process by clicking the Start button.

Zofunika: Pokonza MR SRU, magalimoto ena mugulu angakhudzidwe. Kuti mupewe izi, chotsani ma terminals a gulu pa bolodi.

A new window will appear, and the software download will begin. Once complete, a confirmation message will be displayed.

ZINDIKIRANI: Ngati pulogalamuyo ikulephera kutsitsa, yesani izi:

1. Retry the process.
2. Gwiritsani ntchito doko la USB lina.
3. Power cycle the controller.
4. Ensure the Link2 Programmer is properly connected.
5. Yambitsaninso laputopu.
6. Try a different Link2 Programmer.
7. Use a different laptop.
8. Contact Smartrise for assistance.

• Click Edit to continue loading software for the remaining processors and follow the previous steps.
• Once all software uploads are complete, reconnect the group terminals and power cycle the controller.
• Verify the software version under Main Menu | About | Vers.
• Mpukutu pansi mpaka view zosankha zonse ndikutsimikizira zomwe zikuyembekezeredwa zikuwonetsedwa.

FAQ

Q: Ndiyenera kuchita chiyani ndikakumana ndi zolakwika pakutsitsa mapulogalamu?

A: If you encounter errors during software loading, ensure that all connections are secure and try restarting the process. If issues persist, contact Smartrise support for assistance.

Zolemba / Zothandizira

SMARTRISE C4 Link 2 Programmer [pdf] Malangizo C4 Link 2 Programmer, C4, Link 2 Programmer, Programmer

Maumboni

• Buku Logwiritsa Ntchito