novation LAUNCHKEY MK4 USB MIDI Keyboard Controller
Zofotokozera
- Dzina lazogulitsa: Launchkey MK4
- Mtundu: 3.0
- Kulumikizana: MIDI pa USB ndi DIN
- MIDI Interfaces: Mawiri awiri a MIDI zolowetsa ndi zotuluka kudzera pa USB, MIDI DIN port port
Malangizo Ogwiritsa Ntchito
About the Launchkey Programmer’s Reference Guide
- This document provides all the information you need to be able to control the Launchkey.
- The Launchkey communicates using MIDI over USB and DIN. This document describes the MIDI implementation for the device, the MIDI events coming from it, and how the Launchkey’s various features can be accessed through MIDI messages.
We express MIDI data in this guide in a few ways:
- Kufotokozera kwachingerezi komveka bwino.
- Tikamafotokoza nyimbo, pakati C amaonedwa kuti ndi 'C3' kapena note 60. MIDI channel 1 ndi njira yotsika kwambiri ya MIDI: mayendedwe amachokera ku 1 mpaka 16.
- Mauthenga a MIDI amawonetsedwanso mu data yodziwika bwino, yokhala ndi zofanana ndi decimal ndi hexadecimal. Nambala ya hexadecimal nthawi zonse imatsatiridwa ndi 'h' ndi nambala yofananira yoperekedwa m'mabulaketi. Za example, cholemba pa uthenga pa tchanelo 1 chikusonyezedwa ndi mawonekedwe a byte 90h (144).
Entering Launchkey’s Bootloader
- Launchkey ili ndi bootloader mode yomwe imalola wogwiritsa ntchito view mitundu yaposachedwa ya FW, ndikuyambitsa / kuletsa Easy Start. Bootloader imapezeka pogwira mabatani a Octave Up ndi Octave Down pamodzi ndikuyatsa chipangizocho.
- Chophimbacho chidzawonetsa manambala amakono a Application ndi Bootloader.
- Batani la Record lingagwiritsidwe ntchito kusintha Easy Start. Yoyambira Yosavuta ikayatsidwa, Launchkey imawonekera ngati Chida Chosungirako Misa kuti ipereke chidziwitso chosavuta koyamba. Mutha kuzimitsa izi mukadziwa bwino chipangizocho kuti mulepheretse Chipangizo Chosungira Chachikulu ichi.
- Batani la Play lingagwiritsidwe ntchito kuyambitsa Ntchito.
MIDI on Launchkey
- Launchkey ili ndi zolumikizira ziwiri za MIDI, zomwe zimapereka magawo awiri a MIDI ndi zotuluka pa USB. Iwo ali motere:
- MIDI In/Out (or first interface on Windows): This interface is used to receive MIDI from performing (keys, wheels, pad, pot, and fader Custom Modes); and is used to provide external MIDI input.
- DAW In/Out (or second interface on Windows): This interface is used by DAWs and similar software to interact with the Launchkey.
- Launchkey ilinso ndi doko la MIDI DIN lotulutsa, lomwe limatumiza zomwezo zomwe zimalandiridwa pa doko la MIDI In (USB). Dziwani kuti izi zikupatula mayankho ku zopempha zoperekedwa ndi wolandirayo ku Launchkey pa MIDI Out (USB).
- Ngati mukufuna kugwiritsa ntchito Launchkey ngati malo owongolera a DAW (Digital Audio Workstation), mutha kugwiritsa ntchito mawonekedwe a DAW (Onani DAW Mode [11]).
- Kupanda kutero, mutha kulumikizana ndi chipangizocho pogwiritsa ntchito mawonekedwe a MIDI.
- Launchkey imatumiza Note On (90h (144) - 9Fh (159))) ndi zero zero pa Note Offs. Imalandira ma Note Offs (80h (128) - 8Fh (143))) kapena Note Ons (90h (144) - 9Fh (159)) ndi liwiro la ziro pa Note Off.
Mauthenga a SysEx omwe amagwiritsidwa ntchito ndi chipangizocho
- Mauthenga onse a SysEx amayamba ndi mutu wotsatira, mosasamala kanthu za komwe akupita (Host → Launchkey kapena Launchkey → Host):
Ma SKU Okhazikika:
Mini SKUs:
- Pambuyo pamutu ndi lamulo la byte, kusankha ntchito yoti mugwiritse ntchito, ndiyeno deta iliyonse yofunikira pa ntchitoyi.
Launchkey Programmer’s Standalone (MIDI) mode
- Launchkey imagwira ntchito mu Standalone mode. Mawonekedwewa sapereka magwiridwe antchito enieni polumikizana ndi ma DAW, mawonekedwe a DAW in/out (USB) amakhalabe osagwiritsidwa ntchito pazifukwa izi. Komabe, kuti apereke njira zojambulira zochitika pamabatani owongolera a Launchkey's DAW, amatumiza zochitika za MIDI Control Change pa Channel 16 (MIDI status: BFh, 191) pa mawonekedwe a MIDI in / out (USB) ndi doko la MIDI DIN:
Chithunzi 1. Decimal:
Chithunzi 2. Hexadecimal:
- Mabatani Oyambira ndi Kuyimitsa (Yambani ndi Shift + Yambani pa Launchkey Mini SKUs) amatulutsa MIDI Real Time Start ndi Imitsa mauthenga motsatana.
- Mukapanga Mitundu Yachikhalidwe ya Launchkey, kumbukirani izi ngati mukukhazikitsa zowongolera kuti zizigwira ntchito pa MIDI Channel 16.
Launchkey Programmer’s DAW mode
- Mawonekedwe a DAW amapereka ma DAWs ndi magwiridwe antchito a pulogalamu ya DAW kuti azindikire mawonekedwe osavuta a ogwiritsa ntchito pamtunda wa Launchkey. Kuthekera komwe kwafotokozedwa m'mutu uno kumangopezeka munjira ya DAW ikayatsidwa.
- Ntchito zonse zomwe zafotokozedwa m'mutuwu zikupezeka kudzera mu mawonekedwe a DAW In/Out (USB).
DAW mode control
- Yambitsani DAW Mode:
- Zimitsani DAW Mode:
- Pulogalamu ya DAW kapena DAW ikazindikira Launchkey ndikulumikizana nayo, iyenera kulowa mu DAW mode (kutumiza 9Fh 0Ch 7Fh), ndiyeno, ngati kuli kofunikira, yambitsani zowongolera (onani gawo la "Launchkey MK4" chikalata ichi).
- Pulogalamu ya DAW kapena DAW ikatuluka, iyenera kutuluka mumayendedwe a DAW pa Launchkey (tumizani 9Fh 0Ch 00h) kuti muyibwezere ku Standalone (MIDI).
Pamwamba mu DAW mode
Mu mawonekedwe a DAW, mosiyana ndi mawonekedwe a standalone (MIDI), mabatani onse, ndi zinthu zapamtunda zomwe sizikugwirizana ndi magwiridwe antchito (monga Custom Modes) zitha kupezeka ndipo zimafotokoza za mawonekedwe a DAW In/Out (USB) okha. Mabatani kupatula omwe ali a Faders amapangidwa kuti azitha kusintha zochitika motere:
- Chithunzi 3. Decimal:
- Chithunzi 4. Hexadecimal:
- Zizindikiro za Control Change zomwe zalembedwa zimagwiritsidwanso ntchito potumiza mtundu ku ma LED ofananira (ngati batani lili ndi chilichonse), onani Kujambula pamwamba [14].
Mitundu yowonjezera ikupezeka mu DAW mode
- Kamodzi mu DAW mode, njira zowonjezera zotsatirazi zikupezeka:
- DAW mode pa pads.
- Pulagi, Zosakaniza, Zotumiza & Zoyendetsa pama encoder.
- Voliyumu pamafader (Launchkey 49/61 kokha).
- Mukalowa mu DAW mode, pamwamba pake imakhazikitsidwa motere:
- Pads: DAW.
- Encoders: Plugin.
- Faders: Volume (Launchkey 49/61 only).
- A DAW ayambe madera onsewa moyenerera.
Lipoti la mode ndi kusankha
- Mitundu ya ma pads, ma encoder, ndi ma faders amatha kuwongoleredwa ndi zochitika za MIDI ndipo amanenedwanso ndi Launchkey nthawi iliyonse ikasintha chifukwa cha zochita za ogwiritsa ntchito. Mauthengawa ndi ofunikira kujambulidwa, chifukwa DAW iyenera kuwatsata pokhazikitsa ndikugwiritsa ntchito malo monga momwe amafunira kutengera njira yosankhidwa.
Pad modes
- Zosintha zama pad zimanenedwa kapena zitha kusinthidwa ndi chochitika chotsatira cha MIDI:
- Channel 7 (MIDI status: B6h, 182), Control Change 1Dh (29)
- Mitundu ya Pad imayikidwa pamikhalidwe iyi:
- 01h (1): Kamangidwe ka ngoma
- 0Fh (15): DAW Drum layout
- 02h (2): Kapangidwe ka DAW
- 04h (4): User Chord
- 05h (5): Custom Mode 1
- 06h (6): Custom Mode 2
- 07h (7): Custom Mode 3
- 08h (8): Custom Mode 4
- 0Dh (13): Chithunzi cha Arp
- 0Eh (14): Chord Map
Mitundu ya encoder
- Zosintha za encoder zimanenedwa kapena zitha kusinthidwa ndi chochitika chotsatira cha MIDI:
- Channel 7 (MIDI status: B6h, 182), Control Change 1Eh (30)
- Mitundu ya encoder imayikidwa pamikhalidwe iyi:
- 01h (1): Osakaniza
- 02h (2): Pulogalamu yowonjezera
- 04h (4): Amatumiza
- 05h (5): Transport
- 06h (6): Custom Mode 1
- 07h (7): Custom Mode 2
- 08h (8): Custom Mode 3
- 09h (9): Custom Mode 4
Mitundu ya Fader (Launchkey 49/61 kokha)
- Zosintha zamtundu wa Fader zimanenedwa kapena zitha kusinthidwa ndi chochitika chotsatira cha MIDI:
- Channel 7 (MIDI status: B6h, 182), Control Change 1Fh (31)
- Mitundu ya fader imayikidwa pamikhalidwe iyi:
- 01h (1): Voliyumu
- 06h (6): Custom Mode 1
- 07h (7): Custom Mode 2
- 08h (8): Custom Mode 3
- 09h (9): Custom Mode 4
DAW mode
- Mawonekedwe a DAW pama pads amasankhidwa polowa mu DAW mode, ndipo wogwiritsa ntchito akasankha ndi Shift menyu. Mapadiwo amafotokozanso monga cholembera (midiyo ya MIDI: 90h, 144) ndi aftertouch (midiyo ya MIDI: A0h, 160) zochitika (zotsirizirazo pokhapokha Polyphonic Aftertouch itasankhidwa) pa Channel 1, ndipo imatha kupezeka pokongoletsa ma LED awo motere zizindikiro:
Drum mode(s)
- The DAW Drum mode on pads can replace the Drum mode of standalone (MIDI) mode, providing a capability to the DAW to control its colours and receive the messages on the DAW MIDI port. This is done by sending the below message:
- Drum mode ikhoza kubwezeretsedwanso kuti igwire ntchito yokhayokha ndi uthenga womwe uli pansipa:
- The pads report back as note (MIDI status: 99h, 153) and Aftertouch (MIDI status: A9h, 169) events (the latter only if Polyphonic Aftertouch is selected) on Channel 10, and can be accessed for colouring their LEDs (see “Colouring the Surface [14]”) by the following indices:
Mitundu ya encoder
Mtheradi mumalowedwe
- Ma Encoder mumachitidwe otsatirawa amapereka seti yofananira ya Kusintha kwa Control pa Channel 16 (MIDI status: BFh, 191):
- Pulogalamu yowonjezera
- Wosakaniza
- Amatumiza
- The Control Change indices zoperekedwa ndi izi:
- Ngati DAW iwatumizira zidziwitso zapamalo, amazitenga zokha.
Wachibale mumalowedwe
- Transport Mode imagwiritsa ntchito njira yotulutsira wachibale ndi Zosintha Zotsatira pa Channel 16 (MIDI status: BFh, 191):
- Mu Relative mode, pivot mtengo ndi 40h(64) (palibe kusuntha). Miyezo yomwe ili pamwamba pa pivot point imayika mayendedwe motsata wotchi. Miyezo yomwe ili pansi pa pivot point imayika mayendedwe otsutsana ndi wotchi. Za example, 41h(65) ikufanana ndi sitepe imodzi motsata wotchi ndipo 1Fh(3) ikufanana ndi sitepe imodzi yopingasa.
- Ngati zochitika za Continuous Control Touch zimathandizidwa, Touch On imatumizidwa ngati Control Change chochitika ndi Value 127 pa Channel 15, pamene Touch Off imatumizidwa ngati chochitika cha Control Change ndi Value 0 pa Channel 15. Kwa kale.ample, Mphika wakumanzere kwambiri ungatumize BEh 55h 7Fh kwa Touch On, ndi BEh 55h 00h pa Touch Off.
Fader mode (Launchkey 49/61 kokha)
- Ma Faders, mu Volume mode, amapereka zotsatirazi Zosintha Zosintha pa Channel 16 (MIDI status: BFh, 191):
- Ngati zochitika za Continuous Control Touch zimathandizidwa, Touch On imatumizidwa ngati Control Change chochitika ndi Value 127 pa Channel 15, pamene Touch Off imatumizidwa ngati chochitika cha Control Change ndi Value 0 pa Channel 15. Kwa kale.ample, Fader yakumanzere imatumiza BEh 05h 7Fh ya Touch On, ndi BEh 05h 00h ya Touch Off.
Kukongoletsa pamwamba
- Paziwongolero zonse kupatula Drum mode, cholemba, kapena kusintha kofananira ndi zomwe zafotokozedwa m'malipoti zitha kutumizidwa kuti kupaka utoto wofananira wa LED (ngati zowongolera zili nazo) panjira zotsatirazi:
- Channel 1: Khazikitsani mtundu wokhazikika.
- Channel 2: Khazikitsani mtundu wonyezimira.
- Channel 3: Khazikitsani mtundu wothamanga.
- Kwa Drum mode pa Pads, DAW ikangoyang'anira mawonekedwe [12], njira zotsatirazi zikugwira ntchito:
- Channel 10: Khazikitsani mtundu wokhazikika.
- Channel 11: Khazikitsani mtundu wonyezimira.
- Channel 12: Khazikitsani mtundu wothamanga.
- Mtunduwo umasankhidwa kuchokera papaleti ndi liwiro la chochitikacho kapena mtengo wakusintha kosintha.
- Ma LED a Monochrome amatha kukhala ndi kuwala kwawo pogwiritsa ntchito CC pa njira 4, nambala ya CC ndi index ya LED, mtengo wake ndi kuwala.
- mwachitsanzo
Paleti yamitundu
- Mukapereka mitundu ndi zolemba za MIDI kapena kusintha kosintha, mitundu imasankhidwa malinga ndi tebulo ili, decimal:
- Tebulo lomweli ndi hexadecimal indexing:
Mtundu wonyezimira
- When sending flashing colour, the colour flashes between that set as static or pulsing colour (A), and that contained in the MIDI event setting flashing (B), at 50% duty cycle, synchronised to the MIDI beat clock (or 120bpm or the last clock if no clock is provided). One period is one beat long.
Mtundu wokoka
- Kuthamanga kwamtundu pakati pa mdima ndi kulimba kwathunthu, kulumikizidwa ndi wotchi ya MIDI (kapena 120bpm kapena koloko yomaliza ngati palibe wotchiyo). Nthawi imodzi imakhala yayitali, pogwiritsa ntchito mawonekedwe awa:
RGB mtundu
- Mapadi ndi mabatani a fader amathanso kukhazikitsidwa kumtundu wamtundu pogwiritsa ntchito SysEx yotsatira
Ma SKU Okhazikika:
Mini SKUs:
Kuwongolera chophimba
Malingaliro
- Chiwonetsero chosasunthika: Chiwonetsero chokhazikika chomwe chimawonetsedwa pokhapokha ngati chochitika chilichonse chikufunika kuti chiwonetsedwe kwakanthawi pamwamba pake.
- Chiwonetsero chakanthawi: Chiwonetsero choyambitsidwa ndi chochitika, chopitilira kutalika kwa mawonekedwe anthawi yowonekera.
- Dzina la parameter: Limagwiritsidwa ntchito polumikizana ndi chowongolera, chowonetsa chomwe chikuwongolera. Pokhapokha ngati aperekedwa ndi mauthenga (SysEx), nthawi zambiri ili ndi gulu la MIDI (monga zolemba kapena CC).
- Mtengo wa parameter: Wogwiritsidwa ntchito mogwirizana ndi kuwongolera, kuwonetsa mtengo wake. Pokhapokha ngati zaperekedwa ndi mauthenga (SysEx), ichi ndi mtengo wa MIDI wolamulidwa (monga chiwerengero cha 0 - 127 ngati 7 bits CC).
Konzani zowonetsera
Ma SKU Okhazikika:
Mini SKUs:
- Chiwonetsero chikakonzedwa kuti chikhale chandamale chomwe chaperekedwa, chikhoza kuyambika.
Zolinga
- 00h (0) - 1Fh (31): Nthawi. chiwonetsero cha zowongolera za Analogue (zofanana ndi ma indices a CC, 05h-0Dh: Faders, 15h-1Ch: encoder)
- 20h (32): Chiwonetsero chokhazikika
- 21h (33): Chiwonetsero chakanthawi chapadziko lonse lapansi (chitha kugwiritsidwa ntchito pa chilichonse chosagwirizana ndi zowongolera za Analogue)
- 22h (34): Dzina lowonetsedwa la DAW pad (Munda 0, wopanda kanthu: wokhazikika)
- 23h (35): Dzina lowonetsedwa la DAW Drum pad (Munda 0, wopanda kanthu: wokhazikika)
- 24h (36): Dzina lowonetsedwa la Mixer encoder (Munda 0, wopanda kanthu: wokhazikika)
- 25h (37): Dzina lowonetsedwa la plugin encoder (Munda 0, wopanda kanthu: wokhazikika)
- 26h (38): Imatumiza dzina lowonetsedwa la encoder (Munda 0, wopanda kanthu: wokhazikika)
- 27h (39): Dzina lowonetsedwa la Transport encoder (Munda 0, wopanda kanthu: wokhazikika)
- 28h (40): Dzina lowonetsedwa la mawonekedwe a voliyumu (Munda 0, wopanda kanthu: wokhazikika)
Konzani
- The byte imapanga makonzedwe ndi ntchito ya chiwonetserocho. 00h ndi 7Fh ndizofunika kwambiri: Imalepheretsa (00h) kapena kubweretsa (7Fh) zowonetsera ndi zomwe zili mkati mwake (monga MIDI Chochitika, ndi njira yophatikizika yoyambitsa chiwonetsero).
- Pang'ono 6: Lolani Launchkey kupanga Temp. Onetsani zokha pa Kusintha (zosasintha: Khazikitsani).
- Pang'ono 5: Lolani Launchkey kupanga Temp. Onetsani zokha pa Touch (zosasintha: Set; iyi ndiye Shift + kuzungulira).
- Bit 0-4: Mawonekedwe owonetsera
- Mawonekedwe:
- 0: Mtengo wapadera woletsa chiwonetsero.
- 1-30: Ma ID okonzekera, onani tebulo pansipa.
- 31: Mtengo wapadera woyambitsa chiwonetsero.
ZINDIKIRANI
- The arrangement is ignored for targets only setting names (22h(34) – 28h(40)), however for changing triggerability, it needs to be set non-zero (since the value 0 for these still acts for cancelling the display).
Kukhazikitsa mawu
- Chiwonetsero chikakonzedwa, uthenga wotsatirawu ukhoza kugwiritsidwa ntchito kudzaza malembawo.
Ma SKU Okhazikika:
Mini SKUs:
- Cholembacho chimagwiritsa ntchito mapu amtundu wa ASCII mumtundu wa 20h (32) - 7Eh (126) ndikuwonjezera ma code owongolera omwe ali pansipa, omwe adapatsidwanso kuti apereke zilembo zina zomwe si za ASCII.
- Bokosi Lopanda kanthu - 1Bh (27)
- Bokosi Lodzaza - 1C (28)
- Chizindikiro Chathyathyathya - 1Dh (29)
- Mtima - 1Eh (30)
- Zilembo zina zowongolera siziyenera kugwiritsidwa ntchito chifukwa machitidwe awo angasinthe mtsogolo.
Bitmap
- Chophimbacho chikhoza kuwonetsanso zojambula zachizolowezi potumiza bitmap ku chipangizocho.
Ma SKU Okhazikika:
Mini SKUs:
- The <target> can be either the Stationary display (20h(32)) or the Global temporary display
- (21h(33)). There is no effect on other targets.
- The <bitmap_data> is of fixed 1216 bytes, 19 bytes for each pixel row, for a total of 64 rows
- (19 × 64 = 1216). The 7 bits of the SysEx byte encode pixels from left to right (highest bit corresponding to the leftmost pixel), the 19 bytes covering the 128 pixels width of the display (with five unused bits in the last byte).
- Mukapambana, pali kuyankha ku uthengawu, womwe uli woyenera pa makanema ojambula amadzimadzi nthawi (mutangolandira, Launchkey ili wokonzeka kuvomereza uthenga wotsatira wa Bitmap):
Ma SKU Okhazikika:
Mini SKUs:
- Chiwonetserocho chikhoza kuthetsedwa mwa kuchiletsa momveka bwino (pogwiritsa ntchito Configure Display SysEx kapena MIDI Event), kapena kuyambitsa chiwonetsero chodziwika bwino (omwe magawo ake amasungidwa pamene bitmap ikuwonetsera).
ZINDIKIRANI
- Firmware imatha kusunga bitmap imodzi kukumbukira nthawi imodzi.
Launchkey feature controls
- Zambiri za Launchkey zimatha kuwongoleredwa ndi mauthenga a MIDI CC omwe amatumizidwa ku DAW ya Launchkey pa doko la tchanelo 7 ndikufunsidwa potumiza uthenga womwewo ku tchanelo 8. Yankhani mauthenga otsimikizira zosintha kapena kuyankha mafunso azitumizidwa nthawi zonse pa tchanelo 7.
- Kuti mutsegule kapena kuletsa zowongolerazi munjira yoyimirira, gwiritsani ntchito mauthenga omwe ali pansipa.
Yambitsani zowongolera:
Zimitsani zowongolera:
ZINDIKIRANI
- Mu mawonekedwe a DAW, zowongolera zonse zikumvetsera, koma sizitumiza yankho lotsimikizira kupatula zofunikira zochepa.
- Mu mawonekedwe a DAW, mauthenga omwe ali pamwambawa atha kugwiritsidwa ntchito kuyatsa zonse kapena kubwereranso ku seti ya DAW.
- The CC messages must be sent to the Launchkey’s DAW in MIDI port.
- Maulamuliro a Nibble-Split amagwiritsa ntchito pang'ono pang'ono pamitengo iwiri ya CC kuti apange mtengo wa 8-bit. Mtengo woyamba wa CC umakhala wofunikira kwambiri.
- Zomwe zalembedwa ndi (*) ndizosasunthika, zimapitilira mafunde amagetsi.
- Zolemba zolembedwa ndi (#) nthawi zonse zimayatsidwa mu DAW mode.
| Nambala ya CC | Mbali | Kulamulira Mtundu | |
| Hex | Decimal | ||
| 02h:22h | ( 2:34 ) | Arp Kupeta | Wothandizira 2 adasaina 14 bits peresentitage |
| 03h:23h | ( 3:35 ) | Tempo control | |
| 04h: 24h | ( 4:36 ) | Arp Patukani rhythm pattern | bitmask yogawanitsa |
| 05h: 25h | ( 5:37 ) | Zogwirizana za Arp | bitmask yogawanitsa |
| 06h: 26h | ( 6:38 ) | Arp Accents | bitmask yogawanitsa |
| 07h: 27h | ( 7:39 ) | Arp Ratchets | bitmask yogawanitsa |
| 1Dh (#) | (29) (#) | Sankhani masanjidwe a mapepala | |
| 1Ee (#) | (30) (#) | Sankhani masanjidwe a ma encoder | |
| 1Fh (#) | (31) (#) | Sankhani masanjidwe a faders | |
| 3 Ch | (6) | Sankhani khalidwe | |
| 3Dh (#) | (61) (#) | Sankhani tonic (cholemba mizu) sankhani | |
| 3Ee (#) | (62) (#) | Sikelo mode (mtundu) sankhani | |
| 3Fh (#) | (63) (#) | Shift | |
| 44h | (68) | DAW 14-bits zotsatira za Analogue | Yatsani/Kuzimitsa |
| 45h | (69) | DAW Encoder Relative output | Yatsani/Kuzimitsa |
| 46h | (70) | DAW Fader Pickup | Yatsani/Kuzimitsa |
| 47h | (71) | Zochitika za DAW Touch | Yatsani/Kuzimitsa |
| 49h | (73) | Arp | Yatsani/Kuzimitsa |
| 4 Ah | (74) | Sikelo mode | Yatsani/Kuzimitsa |
| 4 Ch | (76) | DAW Performance note ikulozeranso (Pamene Yatsegula, zolemba za Keybed zimapita ku DAW) | Yatsani/Kuzimitsa |
| 4Dh | (77) | Zone za kiyibodi, mode | 0: Gawo A, 1: Gawo B, 2: Gawani, 3: Gulu |
| 4 iwo | (78) | Zone za kiyibodi, kiyi yogawa | Cholemba cha MIDI pa keybed ya octave yokhazikika |
| 4Fh (*) | (79) (*) | Zone za kiyibodi, sankhani kulumikizana kwa Arp | 0: Gawo A, 1: Gawo B |
| 53h | (83) | DAW Drumrack yogwira utoto | |
| 54h | (84) | DAW Drumrack On / Off (When Off, Drumrack remains in MIDI mode while in DAW mode) | |
| 55h | (85) | Mtundu wa Arp (Mmwamba / Pansi etc.) | |
| 56h | (86) | Arp Rate (kuphatikiza Matatu) | |
| 57h | (87) | Arp Octave | |
| 58h | (88) | Arp Latch | Yatsani/Kuzimitsa |
| 59h | (89) | Arp Gate kutalika | peresentitage |
| 5 Ah | (90) | Arp Gate osachepera | milliseconds |
| 5 Ch | (92) | Arp Mutate | |
| 64h (*) | (100) (*) | MIDI Channel, Part A (or Keybed MIDI Channel for SKUs not having keyboard split) | 0-15 |
| 65h (*) | (101) (*) | MIDI Channel, Gawo B (lomwe limagwiritsidwa ntchito pa ma SKU okhala ndi kiyibodi yogawanika) | 0-15 |
| 66h (*) | (102) (*) | MIDI Channel, Chords | 0-15 |
| 67h (*) | (103) (*) | MIDI Channel, Drums | 0-15 |
| 68h (*) | (104) (*) | Makiyi a liwiro lopindika / Kuthamanga kokhazikika kusankha | |
| 69h (*) | (105) (*) | Pads velocity curve / Kuthamanga kokhazikika kusankha | |
| 6Ayi (*) | (106) (*) | Mtengo wokhazikika wa liwiro | |
| 6Bh (*) | (107) (*) | Arp velocity (whether Arp should take velocity from its note input or use fixed velocity) | |
| 6Ch (*) | (108) (*) | Mtundu wa Pad aftertouch | |
| 6Dh (*) | (109) (*) | Pad aftertouch poyambira | |
| 6 uwu (*) | (110) (*) | Kutulutsa kwa MIDI Clock | Yatsani/Kuzimitsa |
| 6Fh (*) | (111) (*) | Mulingo wowala wa LED | (0–127 where 0 is min, 127 is max) |
| 70h (*) | (112) (*) | Msinkhu wowala pazenera | (0–127 where 0 is min, 127 is max) |
| 71h (*) | (113) (*) | Kuwonetsa kwakanthawi kutha | 1/10 sec mayunitsi, osachepera 1 sec pa 0. |
| 72h (*) | (114) (*) | Vegas mode | Yatsani/Kuzimitsa |
| 73h (*) | (115) (*) | Ndemanga Zakunja | Yatsani/Kuzimitsa |
| 74h (*) | (116) (*) | Sankhani zoyambira zoyambira pads | |
| 75h (*) | (117) (*) | Pots mphamvu-padefault mode kusankha | |
| 76h (*) | (118) (*) | Faders akuyatsa mode kusakhulupirika kusankha | |
| 77h (*) | (119) (*) | Kutengera Custom Mode Fader | 0: Lumpha, 1: Kunyamula |
| 7 Ah | (122) | Chord Map Adventure zokhazikitsa | 1-5 |
| Chidwi | (123) | Chord Map Onani makonda | 1-8 |
| 7 Ch | (124) | Chord Map Kufalikira | 0-2 |
| 7Dh | (125) | Chord Map Roll yokhazikika | 0–100 milliseconds |
FAQs
Q: How do I switch between Standalone mode and DAW mode on the Launchkey?
A: To switch between Standalone (MIDI) mode and DAW mode, refer to the specific instructions provided in the user manual. Typically, Standalone mode is the default upon powering up the Launchkey.
Q: Can I use the Launchkey's MIDI interfaces simultaneously?
A: Yes, you can use both the USB and DIN MIDI interfaces on the Launchkey simultaneously for communication purposes.
Zolemba / Zothandizira
 |
novation LAUNCHKEY MK4 USB MIDI Keyboard Controller [pdf] Buku Logwiritsa Ntchito LAUNCHKEY MK4, LAUNCHKEY MK4 USB MIDI Keyboard Controller, USB MIDI Keyboard Controller, MIDI Keyboard Controller, Keyboard Controller |