LTECH M9 LED Controller

The MINI Series LED Remote Controller adopts RF 2.4GHz wireless transmission technology, with a maximum control distance of up to 30 meters (when unobstructed). When used with the P Series Controllers (P1/P2/P3/P4/P5), one controller supports 5-channel output and is compatible with five types of lamps: DIM (dimming), CT (color temperature), RGB (three-primary color), RGBW (RGB + white), and RGBCW (RGB + cool white + warm white). Within the effective control range, one remote controller can control an unlimited number of controllers, enabling functions such as light on/off, brightness adjustment, color temperature adjustment, RGB static color adjustment, and dynamic mode effects.

It has 9 built-in dynamic modes that can be programmed and modified via the remote controller, meeting users’ needs for different lighting applications. Additionally, it supports enabling/disabling the power-off memory mode and allows setting a 1-9 second fade-in/fade-out time for the controller’s on/off operation.

Technical Parameters

Chitsanzo	M9
Mtundu	Choyera
Mtundu wopanda zingwe	RF 2.4 GHz
Olamulira Ogwirizana	P1、P2、P3、P4、P5 (When programming with this remote controller, first pair any remote controller (such as M1A/M1B/ M1C/M1D/M2A…) with the controller (P1/P2/P3/P4/P5).)
Ntchito voltage	3Vdc (Button battery CR2032×1)
Standby current	1uA
Mtunda wakutali	30M (popanda kusokonezedwa)
Nthawi yogwira ntchito.	-25 ℃ ~ 50 ℃
Kulemera	40g±10g
Makulidwe	104×58×9mm (remote)，108×63×14mm (remote + hold)

Makulidwe

Kuyika Kwazinthu

Njira ziwiri zokonzera chofukizira chakutali:

1. Konzani chosungira chakutali pakhoma ndi zomangira ziwiri.
2. Konzani chosungira chakutali pakhoma ndi zomatira 3M.

Zindikirani: Chonde tulutsani batire la tabu musanagwiritse ntchito koyamba

Ntchito batani

• Yatsani/Kuzimitsa: Press briefly to turn the light on or off.
• Red/Green/Blue: Press briefly to turn the static red/green/blue channel on or off; Press and hold to adjust the brightness of the current channel.
• W/CCT: Press briefly to turn the W/CCT channel on or off; Press and hold to adjust the brightness of the W channel or the color temperature of the CCT channel.
• CCT Brightness: Press and hold to adjust the brightness of the CCT channel.
• Color Save Button: Press briefly to recall the saved static color;  Press and hold to save the current static color.
• Program Play Button: Press briefly to switch between 3 dynamic effects (jump, fade, stroboscope) (applied to transitions between saved static colors); Press and hold to play 9 dynamic modes in a loop.
• Mode Save Button: Press briefly to recall the dynamic mode; Press and hold to save the current dynamic effect as a dynamic mode.
• Liwiro/Kuwala +/-: Press briefly to adjust the speed of the dynamic mode; Press and hold to adjust the brightness of the dynamic mode.
• Power-Off Memory Mode Switch: Press briefly to enable/disable the memory mode of the current controller.
• On/Off Fade Time: Press and hold the “FADE TIME” button and the Mode Save Button (while pressing the number keys 1-9) to set the on/off fade time of the controller (1-9 seconds).

Usage of the Programming Button

1. Color Selection: Use the number keys 1-7 to store 7 colors. After selecting a color by pressing the RGB button press and hold the Color Save Buttons in sequence to save the current static color. (The color will be automatically saved to the corresponding button.)
2. Press the Programming Play Button to set 3 dynamic effects for the 1-7 static colors.(Single press to switch: Jump, Fade, Strobe)
   Exampndi 1:Red, Green, Blue, Yellow, Purple, Cyan, White Seven colors, Jump/Fade/Strobe
   Exampndi 2:Red, Blue Two colors, Jump/Fade/Strobe
   Exampndi 3:
   Red, White, Green, White 4, Blue Five colors, Jump/Fade/Strobe
   Note: R + B = Purple, R + G = Yellow, G + B = Cyan, R + G + B = White, R/G/B turned off together = Black
3. Press the Speed/Brightness +/- buttons briefly to control the mode brightness. There are 8 brightness levels in total, with the default level set to 5.
4. Press and hold the Mode Save Buttonto save the current static color + dynamic effect to one of the Mode Save Buttons (1-9).

Change Mode Selection List

AYI.	Color(Switch Colors via  )	Switch Between 3 Types via   Button Press
		Lumpha	Fade	Strobe
1	Wakuda
2	Chofiira	Okhazikika Ofiira	Red Fade In and Out	Red Strobe
3	Green	Malo Obiriwira	Green Fade In and Out	Green Strobe
4	Buluu	Blue Static	Blue Fade In and Out	Blue Strobe
5	Yellow	Yellow Yokhazikika	Yellow Fade In and Out	Yellow Strobe
6	Wofiirira	Chipongwe Chokhazikika	Purple Fade In and Out	Purple Strobe
7	Chiani	Kukhazikika kwa Cyan	Cyan Fade In and Out	Cyan Strobe
8	Choyera	Zoyera Zokhazikika	White Fade In and Out	White Strobe
9	Red/Green/Blue	Kudumpha Kwambiri-Wobiriwira-Buluu	Red-Green-Blue Fade	Red-Green-Blue Strobe
10	Red/Green/Blue/Yellow/ Purple/Cyan/White	Seven-Color Jump	Seven-Color Fade	Seven-Color Strobe

Wiring Diagram for Receiver and Controller

Zindikirani: One remote control can control an unlimited number of controllers

Bwezerani Ntchito Yabatani

• Reset Static Color:
  Turn off all channels, then press and hold the Color Save Button corresponding to the static color you want to reset to save. This will clear the current static color.
• Reset Dynamic Modes:
  Press and hold both the Color Save Button “5” and the Programming Play Button simultaneously until the indicator light flashes several times and then turns off. This indicates that all dynamic modes have been reset successfully.
• Synchronize the Remote Control’s Dynamic Modes to the Controller:
  Press and hold both the Color Save Button “1” and “4” until the indicator light flashes several times and then turns off. This indicates that all dynamic modes edited on the remote control have been fully synchronized to the controller.
  Note: If the dynamic modes of the remote control have been reset, you need to synchronize the reset dynamic modes of the remote control to the controller again. This avoids desynchronization between the remote control and the controller’s dynamic modes, which would cause abnormal effect issues.

Pair the Controller

Kufananiza ma Code

1. Method 1: Button Code Matching
   Briefly press the Controller ID Learning Button; the load light will flash. Within 10 seconds, press and hold the Remote Control’s On/Off Button until the load light flashes slowly and then stays on. This indicates successful code matching.
2. Method 2: Power-On Code Matching
   Chotsani chowongolera;
   After powering the controller on again, press and hold the On/Off Button on the remote control within 3 seconds until the load light flashes slowly and then stays on. This indicates successful code matching.

Kuchotsa Code

• Button Code Clearing Method:
  Press and hold the Controller ID Learning Button for 10 seconds. The load light will flash 5 times, indicating that all paired controllers have been completely deleted.
• Power-On Code Clearing Method:
  Perform 10 consecutive power-on and power-off operations on the controller. The load light will flash 5 times, indicating that all paired controllers have been completely deleted.

Kuwala kwa Chizindikiro

• When the light is on, press any button, and the remote control’s indicator light will turn red.
• If no button is pressed for 30 seconds, the remote control will enter sleep mode. To exit sleep mode, press any button.

Zindikirani: If the LED light does not turn on when the button is pressed, the battery may be dead. Please replace the battery in a timely manner.

Mayendedwe ndi Kusunga

1.  Mayendedwe
   Zogulitsa zimatha kutumizidwa kudzera pamagalimoto, mabwato ndi ndege.
   Paulendo, mankhwala ayenera kutetezedwa ku mvula ndi dzuwa. Chonde pewani kugwedezeka kwakukulu ndi kugwedezeka panthawi yotsegula ndi kutsitsa.
2. Kusungirako
   Zosungirako ziyenera kugwirizana ndi Class I Environmental Standards. Zogulitsa zomwe zasungidwa kwa miyezi isanu ndi umodzi zimalimbikitsidwa kuti ziwunikidwenso ndipo zitha kugwiritsidwa ntchito pokhapokha zitakhala zoyenerera.

Kusamala
Chonde gwiritsani ntchito malo owuma amkati;

• Mukayika batire, chonde lumikizani malo abwino komanso oyipa moyenera. Ngati cholumikizira chakutali sichidzagwiritsidwa ntchito kwa nthawi yayitali, chotsani batire;
• Pamene mtunda wakutali ukafupikitsidwa ndipo chakutali sichigwira ntchito pafupipafupi, chonde sinthani batire munthawi yake;
• Chonde itengeni mosamala ndikuyiyika pansi kuti mupewe kugwa komwe kumayambitsa kuwonongeka;
• Ngati vuto lichitika, chonde musayese kukonza nokha. Ngati muli ndi funso, chonde lemberani ogulitsa anu.
• Bukuli limasinthidwa popanda chidziwitso china. Ntchito zamagetsi zimadalira katunduyo. Chonde khalani omasuka kulumikizana ndi omwe akutigawira ngati muli ndi funso.

Chigwirizano cha Chitsimikizo

Nthawi zotsimikizira kuyambira tsiku lobereka: zaka 5.
Ntchito zokonzetsera zaulere kapena zosinthira pamavuto apamwamba zimaperekedwa mkati mwa nthawi ya chitsimikizo.

Zitsimikizo kuchotsera pansipa:
Zinthu zotsatirazi sizili m'gulu la chitsimikizo cha kukonzanso kwaulere kapena ntchito zina:

• Pamwamba pa nthawi ya chitsimikizo;
• Kuwonongeka kulikonse kopanga chifukwa cha kuchuluka kwamphamvutage, overload, or improper operations; Products with severe physical damage;
• Zowonongeka chifukwa cha masoka achilengedwe ndi mphamvu majeure;
• Zolemba za chitsimikizo ndi barcode zawonongeka.
• No any contract signed by our company.

1. Repair or replacement provided is the only remedy for customers. Our company is not liable for any incidental or consequential damage unless it is within the law.
2.  Our company has the right to amend or adjust the terms of this warranty, and release in written form shall prevail.

CHENJEZO

• KUYANG'ANIRA KWAMBIRI: Chida ichi chili ndi batani kapena batire yandalama.
• IMFA kapena kuvulala koopsa kungachitike ngati atamwa.
• Selo yomezedwa ya batani kapena batire yandalama imatha kuyambitsa Kutentha kwa Chemical mkati mwa maola awiri okha.
• sungani mabatire atsopano ndi ogwiritsidwa ntchito AKUTI ANA
• Funsani kuchipatala ngati batire ikuganiziridwa kuti yamezedwa kapena kulowetsedwa mkati mwa gawo lililonse la thupi.
• Chotsani ndikubwezeretsanso kapena kutaya mabatire omwe agwiritsidwa ntchito molingana ndi malamulo amderalo ndikupewa ana. OSAtaya mabatire mu zinyalala zapakhomo kapena kuwotcha.
• Ngakhale mabatire ogwiritsidwa ntchito amatha kuvulaza kwambiri kapena kufa.
• Imbani foni kumalo owongolera poizoni kuti mudziwe zambiri zamankhwala.
• Mtundu wa batri wogwirizana: CR2032.
• Batire yadzina voltagndi: 3vc.
• Mabatire osachatsidwanso sayenera kuyitanidwanso.
• Musakakamize kukhetsa, kuyitanitsa, kugawanitsa, kutentha pamwamba (chiyembekezo cha kutentha chomwe chinaperekedwa ndi wopanga) kapena kuyatsa. Kuchita izi kungayambitse kuvulala chifukwa chotuluka mpweya, kutayikira kapena kuphulika komwe kumabweretsa kutentha kwa mankhwala.
• Onetsetsani kuti mabatire aikidwa moyenera malinga ndi polarity (+ ndi -).
• Osasakaniza mabatire akale ndi atsopano, mitundu yosiyanasiyana ya mabatire, monga alkaline, carbon-zinc, kapena mabatire omwe amatha kuchangidwanso.
• Chotsani ndikubwezeretsanso kapena kutaya mabatire pazida zomwe sizikugwiritsidwa ntchito kwa nthawi yayitali molingana ndi malamulo amderalo.
• Nthawi zonse tetezani chipinda cha batri. Ngati chipinda cha batri sichitseka bwino, siyani kugwiritsa ntchito mankhwalawa, chotsani mabatire, ndi kuwasunga kutali ndi ana.

Mafunso Ofunsidwa Kawirikawiri

How many colors can be stored in the remote?

You can store up to 7 colors in the remote using the number keys 1-7.

How many brightness levels are available?

There are 8 brightness levels in total, with the default level set to 5.

Can one remote control multiple controllers?

Yes, one remote control can control an unlimited number of controllers.

Zolemba / Zothandizira

LTECH M9 LED Controller [pdf] Buku la Malangizo M9 LED Controller, M9, LED Controller, Controller

Maumboni

• Buku Logwiritsa Ntchito