Woyendetsa LED
(Multi-Zone)

M1C Wireless Controller

The Mini Pro Series LED Remote Control adopts RF 2.4GHz wireless transmission technology, with a maximum control distance of up to 30 meters (in an unobstructed environment).
When paired with the P5 Controller, one controller is compatible with 5-channel output and supports five types of lamps: DIM, CT, RGB, RGBW, and RGBCW. Within the effective control range, one remote control can control an unlimited number of controllers,  and realize functions such as light on/off, brightness adjustment, color temperature tuning, RGB static color selection, dynamic mode effects activation, and scene recall—meeting users’ needs for different lighting applications.
For zone control: One remote control can manage multiple zones, and multiple controllers can be coded into the same zone to achieve group control of that zone. Pressing the master on/off key of the remote control once can turn on/off the lights in all zones.

Technical Parameters

Chitsanzo	M1C	M1D	M2C	M2D	M4C	M4D	M5C	M5D
Mtundu	Choyera	Wakuda	Choyera	Wakuda	Choyera	Wakuda	Choyera	Wakuda
Mtundu Wotsika	DIM		CT		RGB/RGBW		Mtengo RGBCW
Mtundu wopanda zingwe	RF 2.4 GHz
Ntchito voltage	3Vdc (Batani la batani CR2032×1)
Standby current	2uA
Mtunda wakutali	30M (Under unobstructed conditions)
Olamulira Ogwirizana	P1、P2、P3、P4、 P5		P2、P3、P4、 P5		P3、P4、 P5		P5
Nthawi yogwira ntchito.	-25 ℃ ~ 50 ℃
Kulemera	40g±10g
Makulidwe	104×58×9mm (remote)，108×63×14mm (remote+hold)

Makulidwe

Kuyika Kwazinthu

Njira ziwiri zokonzera chofukizira chakutali:

1. Konzani chosungira chakutali pakhoma ndi zomangira ziwiri.
2. Konzani chosungira chakutali pakhoma ndi zomatira 3M.

Batiri lolowetsera m'malo

Ntchito batani

Dimming Remote Control M1C/M1D

Zone 1,2,3,4:
① Short press to turn on and select the current zone; long press to turn off the current zone’s light;
② If one zone is selected and another zone is pressed within 3 seconds, both zones are selected simultaneously. In this case, the selected zone can be controlled;
③ If the same zone is selected repeatedly within 3 seconds, only that zone will remain selected (e.g., if zones 1 and 2 are selected, if zone 2 is pressed again within 3 seconds, only zone 2 will be selected).

Master Power: Turns all lights on or off.
Zone 1, 2, 3, 4: Short press to turn on and select the current zone’s light; long press to turn off the current zone’s light.
Brightness Touch Ring: Touch to change the brightness of the current zone’s light.
Brightness +/-: Adjust brightness; short press for 10 levels; long press for 1-6 seconds for 255 levels of continuous adjustment.
Scene: Short press to recall the scene; long press for 3 seconds to save the current light state of the selected Zone to the scene.

Color Temperature Remote Control M2C/M2D

Zone 1,2,3,4
① Short press to turn on and select the current zone; long press to turn off the current zone’s light;
② If one zone is selected and another zone is pressed within 3 seconds, both zones are selected simultaneously. In this case, the selected zone can be controlled;
③ If the same zone is selected repeatedly within 3 seconds, only that zone will remain selected (e.g., if zones 1 and 2 are selected, if zone 2 is pressed again within 3 seconds, only zone 2 will be selected).
Master Power: Turns all lights on or off.
Zones 1, 2, 3, 4: Short press to turn on and select the current Zone’s light; long press to turn off the current Zone’s light.
Brightness Touch Ring: Touch to change the color temperature of the current Zone’s light.
Brightness +/-: Adjust brightness; short press for 10 levels; long press for 1-6 seconds for 255 consecutive levels.
Scene: Short press to recall the scene; long press for 3 seconds to save the current light state of the selected Zone to the scene.

Ntchito batani
RGB/RGBW Remote Control M4C/M4D

Zone 1,2,3,4
① Short press to turn on and select the current zone; long press to turn off the current zone’s light;
② If one zone is selected and another zone is pressed within 3 seconds, both zones are selected simultaneously. In this case, the selected zone can be controlled;
③ If the same zone is selected repeatedly within 3 seconds, only that zone will remain selected (e.g., if zones 1 and 2 are selected, if zone 2 is pressed again within 3 seconds, only zone 2 will be selected).
Master Power: Turns all lights on or off.
Zones 1, 2, 3, 4: Short press to turn on and select the current Zone’s light; long press to turn off the current Zone’s light.
Touch Color Ring: Touch the RGB color ring to select a color.
Mode/Speed: Short press to switch dynamic modes; long press to adjust speed;
Short press both “1” and “4” Zone keys simultaneously to cycle through dynamic modes.
Brightness +/-: Adjust brightness; short press for 10 levels; long press for 1-6 seconds for 255 levels of continuous adjustment.
White Light: For RGBW lights, short press to turn the W channel on or off; long press for 1-6 seconds to continuously adjust the W brightness.
Scene: Short press to recall the scene; long press for 3 seconds to save the current lighting state to the scene.

RGBCW Remote Control M5C/M5D

Zone 1,2,3,4
① Short press to turn on and select the current zone; long press to turn off the current zone’s light;
② If one zone is selected and another zone is pressed within 3 seconds, both zones are selected simultaneously. In this case, the selected zone can be controlled;
③ If the same zone is selected repeatedly within 3 seconds, only that zone will remain selected (e.g., if zones 1 and 2 are selected, if zone 2 is pressed again within 3 seconds, only zone 2 will be selected).
Master Power: Turns all lights on or off.
Zones 1, 2, 3, 4: Short press to turn on and select the current Zone’s light; long press to turn off the current Zone’s light.
Touch Color Ring: Touch the color temperature/RGB color ring to select a color.
Mode/Speed: Short press to switch dynamic modes; long press to adjust speed;
Short press both “1” and “4” Zone keys simultaneously to cycle through dynamic modes.
Color Temperature: Short press to turn the current Zone’s color temperature channel on/off; touch the color ring to switch to the color temperature touch ring; Long press to adjust the brightness of the current color temperature.
RGB: Short press to turn the current Zone’s RGB channel on/off; touch the color ring to switch to the RGB touch ring;
Long press to adjust the brightness of the current color.
Scene: Short press to recall the scene; long press for 3 seconds to save the current lighting state to the scene.

Mtundu	R/G/B values
Chofiira	R100%   G0%   B0%
Yellow	R100%   G100%   B0%
Green	R0%   G100%   B0%
Chiani	R0%   G100%   B100%
Buluu	R0%   G0%   B100%
Wofiirira	R100%   G0%   B100%
Choyera	R100%   G100%   B100%

Dynamic mode	Red-purple gradient	Static mode	Chofiira
	Blue-purple gradient
	Color temperature gradient (warm yellow, cool white)		Green
	Three-color gradient (RGB)
	Six-color gradient (red, green, blue, yellow, purple, cyan)		Buluu
	Seven colors changing (red, green, blue, yellow, purple, cyan, white)		Yellow
	Seven-color gradient (red, green, blue, yellow, purple, cyan, white)		Wofiirira
	Three-color gradient (RGB)		Chiani
	White gradually brightens and darkens		Mixed light white

Chithunzi cha Wiring

Used with P-series controllers

Kulumikizana kwa Code
Key pairing code

1. Short press the controller’s ID learning button. The load indicator will start flashing. Please complete the following steps within 10 seconds.
2. Pairing with Mini Pro series Multi-Zone remote control: Press and hold the Master Power button until the remote indicator flashes slowly. Press the desired Zone button until the load indicator flashes quickly and stays on and the color ring changes. Pairing complete.

Power-on code pairing

1. After the controller powers off and back on, please complete the following steps within 10 seconds.
2. Pairing with Mini Pro series Multi-Zone remote control: Press and hold the Master Power button until the remote indicator flashes slowly. Press the desired Zone button until the load indicator flashes quickly and stays on and the color ring changes. Pairing complete.

Zindikirani: One controller can be paired with a maximum of 10 remote controllers. If more than 10 remote controllers are paired, the ID code of the first remote controller will be automatically deleted.

Chotsani Code
To delete all remote controls: Press and hold the controller ID learning button for 6 seconds. The controller load light will flash 4 times quickly and then stay on, indicating successful code clearing.

Use the remote controls together
Code pairing (assuming B learns from A)

1. Simultaneously press and hold the top two buttons on remote control B until the indicator light stays on, then release.
2. Within 5 seconds, press any button on remote control A. The indicator light on remote control B will turn off, indicating successful learning.
   *Remote controls of the same model can learn from each other.

Chotsani Code
Simultaneously press and hold the top two buttons on the remote control for 6 seconds until the indicator light flashes twice, indicating successful code clearing.

Kuwala kwa Chizindikiro

• Nyali ikayaka, dinani batani lililonse, ndipo nyali yowunikira ya remote control idzasanduka yofiira.
• Ngati batani silikukanikiza kwa masekondi 6, remote control idzalowa mu sleep mode. Kuti mutuluke mu sleep mode, dinani batani lililonse.

Zindikirani: Ngati nyali ya LED siikuyatsa batani likakanikiza, batire ikhoza kukhala yakufa. Chonde sinthani batireyo nthawi yake.

Mayendedwe ndi Kusunga

1. Mayendedwe
   Zogulitsa zimatha kutumizidwa kudzera pamagalimoto, mabwato ndi ndege.
   Paulendo, mankhwala ayenera kutetezedwa ku mvula ndi dzuwa. Chonde pewani kugwedezeka kwakukulu ndi kugwedezeka panthawi yotsegula ndi kutsitsa.
2. Kusungirako
   Zosungirako ziyenera kugwirizana ndi Class I Environmental Standards. Zogulitsa zomwe zasungidwa kwa miyezi isanu ndi umodzi zimalimbikitsidwa kuti ziwunikidwenso ndipo zitha kugwiritsidwa ntchito pokhapokha zitakhala zoyenerera.

Kusamala

• Chonde gwiritsani ntchito malo owuma amkati;
• Mukayika batire, chonde lumikizani malo abwino komanso oyipa moyenera. Ngati cholumikizira chakutali sichidzagwiritsidwa ntchito kwa nthawi yayitali, chotsani batire;
• Pamene mtunda wakutali ukafupikitsidwa ndipo chakutali sichigwira ntchito pafupipafupi, chonde sinthani batire munthawi yake;
• Chonde itengeni mosamala ndikuyiyika pansi kuti mupewe kugwa komwe kumayambitsa kuwonongeka;
• Ngati vuto lichitika, chonde musayese kukonza nokha. Ngati muli ndi funso, chonde lemberani ogulitsa anu.
  ※ This manual is subject to changes without further notice. Product functions depend on the goods. Please feel free to contact our official distributors if you have any question.

Chigwirizano cha Chitsimikizo

• Nthawi zotsimikizira kuyambira tsiku lobereka: zaka 5.
• Ntchito zokonzetsera zaulere kapena zosinthira pamavuto apamwamba zimaperekedwa mkati mwa nthawi ya chitsimikizo.

Zitsimikizo kuchotsera pansipa:

Zinthu zotsatirazi sizili m'gulu la chitsimikizo cha kukonzanso kwaulere kapena ntchito zina:

• Pamwamba pa nthawi ya chitsimikizo;
• Kuwonongeka kulikonse kopanga chifukwa cha kuchuluka kwamphamvutage, kulemetsa, kapena ntchito zosayenera;
• Zamankhwala zowononga kwambiri thupi;
• Zowonongeka chifukwa cha masoka achilengedwe ndi mphamvu majeure;
• Zolemba za chitsimikizo ndi barcode zawonongeka.
• Palibe pangano lililonse lomwe lasainidwa ndi kampani yathu.
  1. Repair or replacement provided is the only remedy for customers. Our company is not liable for any incidental or consequential damage unless it is within the law.
  2. Our company has the right to amend or adjust the terms of this warranty, and release in written form shall prevail.

CHENJEZO

• KUYANG'ANIRA KWAMBIRI: Chida ichi chili ndi batani kapena batire yandalama.
• IMFA kapena kuvulala koopsa kungachitike ngati atamwa.
• Selo yomezedwa ya batani kapena batire yandalama imatha kuyambitsa Kutentha kwa Chemical mkati mwa maola awiri okha.
• sungani mabatire atsopano ndi ogwiritsidwa ntchito AKUTI ANA
• Funsani kuchipatala ngati batire ikuganiziridwa kuti yamezedwa kapena kulowetsedwa mkati mwa gawo lililonse la thupi.

a) Chotsani ndikubwezeretsanso nthawi yomweyo kapena kutaya mabatire omwe agwiritsidwa ntchito molingana ndi malamulo amderalo ndikupewa ana. OSAtaya mabatire mu zinyalala zapakhomo kapena kuwotcha.
b) Ngakhale mabatire ogwiritsidwa ntchito amatha kuvulala kwambiri kapena kufa.
c) Itanani malo owongolera poyizoni kuti mudziwe zambiri zamankhwala.
d) The compatible battery type: CR2032.
e) Batire yadzina voltagndi: 3vc.
f) Mabatire osachatsidwanso sayenera kuwonjezeredwa.
g) Musakakamize kutulutsa, kuthira, kutulutsanso, kugawanitsa, kutentha pamwamba (chiyembekezo cha kutentha chomwe chili ndi wopanga) kapena kuyatsa. Kuchita izi kungayambitse kuvulala chifukwa chotuluka mpweya, kutayikira kapena kuphulika komwe kumabweretsa kutentha kwa mankhwala.
h) Onetsetsani kuti mabatire aikidwa moyenera malinga ndi polarity (+ ndi -).
i) Osasakaniza mabatire akale ndi atsopano, mitundu yosiyanasiyana ya mabatire, monga alkaline, carbon-zinc, kapena mabatire otha kuchajwanso.
j) Chotsani ndikubwezeretsanso nthawi yomweyo kapena kutaya mabatire pazida zosagwiritsidwa ntchito kwa nthawi yayitali molingana ndi malamulo amderalo.
k) Nthawi zonse tetezani chipinda cha batri. Ngati chipinda cha batri sichitseka bwino, siyani kugwiritsa ntchito mankhwalawa, chotsani mabatire, ndi kuwasunga kutali ndi ana.

Zolemba / Zothandizira

LTECH M1C Wireless Controller [pdf] Buku la Malangizo M1C, M1D, M2C, M2D, M4C, 4D, M5C, M5D, 301, A3, M1C Wireless Controller, M1C, Wireless Controller, Controller

Maumboni

• Buku Logwiritsa Ntchito