LTECH LED Controller (Single-zone)

The Mini Pro series LED remote control uses RF 2.4GHz wireless transmission technology, with a control distance (unobstructed) of up to 30 meters. When paired with the P-series controllers (P1/P2/P3/P4/P5), one controller is compatible with 5 outputs, supporting five types of lighting fixtures: DIM/CT/RGB/RGBW/RGBCW. One remote control can control numerous controllers within its effective range, enabling functions such as turning lights on/off, adjusting brightness, adjusting color temperature and RGB static colors, dynamic mode effects, and scene recall, meeting users’ needs for different lighting applications. For example, the dimming remote (M1A/M1B) has a quick brightness function, allowing one-button switching of brightness percentage; the color temperature remote (M2A/M2B) has a night light function, allowing one-button switching to low brightness; the RGBW remote (M4A/M4B) and RGBCW remote (M5A/M5B) can switch dynamic modes via mode buttons, or achieve a 9-mode loop effect via remote control combination keys.

Technical Parameters

Chitsanzo	M1A	M1B	M2A	M2B	M4A	M4B	M5A	M5B
Mtundu	Choyera	Wakuda	Choyera	Wakuda	Choyera	Wakuda	Choyera	Wakuda
Mtundu Wotsika	DIM		CT		RGB/RGBW		Mtengo RGBCW
Mtundu wopanda zingwe	RF 2.4 GHz
Ntchito voltage	3Vdc (Batani la batani CR2032×1)
Standby current	2uA
Distance of the remote	30M (Under unobstructed conditions)
Nthawi yogwira ntchito.	-25 ℃ ~ 50 ℃
Kulemera	40g±10g
Makulidwe	104×58×9mm (remote)，108×63×14mm (remote+hold)

Makulidwe

Kuyika Kwazinthu

Two ways to fix the remote holder :

1. Konzani chosungira chakutali pakhoma ndi zomangira ziwiri.
2. Konzani chosungira chakutali pakhoma ndi zomatira 3M.
   • Zindikirani: Chonde tulutsani batire la tabu musanagwiritse ntchito koyamba

Batiri lolowetsera m'malo

1. Use a screwdriver to unscrew the bottom screw
2. Pull out the battery compartment and replace the battery

Ntchito batani

Dimming Remote Control M1A/M1B

• Power: Turns the light on or off. Brightness
• Touch Ring: Touch to change the light’s brightness.
• Brightness +/-: Adjusts the brightness; short press for 10 levels; long press for 1-6 seconds for 255 levels of continuous adjustment.
• 4 Brightness Settings: 25%, 50%, 75%, 100% (4 brightness levels with shortcut keys).
• Scene: Short press to recall a scene; long press for 3 seconds to save the current light state to the scene.

Color Temperature Remote Control M2A/M2B

• Power: Turns the light on or off. Color Temperature Touch Ring: Touch to change the light’s color temperature.
• Night Light: Switches to low brightness, night light mode.
• Brightness +/-: Adjusts brightness; short press for 10 levels; long press for 1-6 seconds for 255 levels of continuous adjustment.
• 3 Color Temperatures: Cool White, White Light, Warm Light; 3 color temperature shortcut keys.
• Scene: Short press to recall a scene; long press for 3 seconds to save the current light state to the scene.

RGB/RGBW Remote Control M4A/M4B

• Power: Turns the lights on or off.
• Touch Color Ring: Touch the RGB color ring to select a color.
• Mode/Speed: Short press to switch dynamic modes; long press to adjust speed. Short press both “R” and “W” keys simultaneously to cycle through dynamic modes.
• Brightness +/-: Adjust brightness; short press for 10 levels; long press for 1-6 seconds for 255 levels of continuous adjustment.
• Red/Green/Blue: Short-press to turn the static red/green/blue channels on or off. Long press for 1-6 seconds to continuously adjust the brightness of the current channel.
• White Light: For RGBW lights, short-press to turn the W channel on or off; long-press for 1-6 seconds to continuously adjust the W brightness.
• Scene: Short press to recall the scene; long press for 3 seconds to save the current lighting state to the scene.

RGBCW Remote Control M5A/M5B

• Power: Turns the lights on or off.
• Touch Color Ring: Select colors using the touch color temperature/RGB color ring.
• Mode/Speed: Short press to switch between dynamic modes; long press to adjust speed. Short press the “R” and ” “ keys simultaneously to cycle through dynamic modes.
• Color Temperature: Short press to turn the color temperature channel on or off; touch the color ring to switch to the color temperature touch ring. Long press for 1-6 seconds to continuously adjust the brightness of the current color temperature.
• RGB: Short-press to turn the RGB channel on or off; touch the color ring to switch to the RGB touch ring. Long-press for 1-6 seconds to continuously adjust the brightness of the current color.
• Red/Green/Blue: Short press to turn the static red/green/blue channel on or off. Long-press for 1-6 seconds to continuously adjust the brightness of the current channel.
• Scene: Short press to recall the scene; long press for 3 seconds to save the currentlighting state to the scene.

Mtundu	R/G/B values
Chofiira	R100% G0% B0%
Yellow	R100% G100% B0%
Green	R0% G100% B0%
Chiani	R0% G100% B100%
Buluu	R0% G0% B100%
Wofiirira	R100% G0% B100%
Choyera	R100% G100% B100%

Dynamic mode	Red-purple gradient	Static mode	Chofiira
	Blue-purple gradient
			Green
	Color temperature gradient (warm yellow, cool white)
			Buluu
	Three-color gradient (RGB)
	Six-colo  gradient (red, green, blue, yellow, purple, cyan)		Yellow
	Seven colors changing (red, green, blue, yellow, purple, cyan, white)		Wofiirira
	Seven-color gradient (red, green, blue, yellow, purple, cyan, white)
			Chiani
	Three-color gradient (RGB)
			Mixed light white
	White gradually brightens and darkens

Used with P series controllers

Kulumikizana kwa Code

Key pairing code

1. Short-press the controller’s ID learning button. The load indicator will start flashing. Please complete the following steps within 10 seconds.
2. Pairing with Mini Pro series Single-zone remote control: Press and hold the Power button until the load indicator flashes quickly and stays on, and the color ring changes. Pairing complete.

Power-on code pairing

1. After the controller powers off and back on, please complete the following steps within 10 seconds.
2. Pairing with Mini Pro series Single-zone remote control: Press and hold the Power button until the load indicator flashes quickly and stays on, and the color ring changes. Pairing complete.

Zindikirani: One controller can be paired with a maximum of 10 remote controllers. If more than 10 remote controllers are paired, the ID code of the first remote controller will be automatically deleted.

Chotsani Code

To delete all remote controls: Press and hold the controller ID learning button for 6 seconds. The controller load light will flash 4 times quickly and then stay on, indicating successful code clearing.

Use the remote controls together

Code pairing (assuming B learns from A)

1. Simultaneously press and hold the top two buttons on remote control B until the indicator light stays on, then release.
2. Within 5 seconds, press any button on remote control A. The indicator light on remote control B will turn off, indicating successful learning. *Remote controls of the same model can learn from each other.

Chotsani Code
Simultaneously press and hold the top two buttons on the remote control for 6 seconds until the indicator light flashes twice, indicating successful code clearing.

Kuwala kwa Chizindikiro

• Nyali ikayaka, dinani batani lililonse, ndipo nyali yowunikira ya remote control idzasanduka yofiira.
• Ngati batani silikukanikiza kwa masekondi 6, remote control idzalowa mu sleep mode. Kuti mutuluke mu sleep mode, dinani batani lililonse.
  • Zindikirani: Ngati nyali ya LED siikuyatsa batani likakanikiza, batire ikhoza kukhala yakufa. Chonde sinthani batireyo nthawi yake.

Mayendedwe ndi Kusunga

1. Transportation Products can be shipped via vehicles, boats, and planes. During transportation, products should be protected from rain and sun. Please avoid severe shock and vibration during the loading and unloading process.
2. Storage: The storage conditions should comply with the Class I Environmental Standards. The products that have been stored for more than six months are recommended to be re-inspected and can be used only after they have been qualified.

Kusamala

Please use in a dry indoor environment:

• When installing the battery. pleæeconnectthepositive and negative terminals correctly. Ifthe remote will not be used for along period, take the battery out.
• When the remote distance is shorten and or the remote dæsn’t work frequently, please change the battery in time.
• Please carefully take it and put it down to prevent falls that cause damage.
• please donotattemptto fix products by yourself. If you have any question please contact your suppliers
• Bukuli likhoza kusintha popanda chidziwitso china. Ntchito zamalonda zimadalira katundu. Chonde khalani omasuka kulumikizana ndi ogulitsa athu ngati muli ndi mafunso.

Chigwirizano cha Chitsimikizo

• Nthawi zotsimikizira kuyambira tsiku lobereka: zaka 5
• Free repair or replacement serv’icæ for quality problems is provided within warranty periods. Warranty exclusions below:
• Zinthu zotsatirazi sizili m'gulu la chitsimikizo cha kukonzanso kwaulere kapena ntchito zina:

Beyond warranty periods:

• Kuwonongeka kulikonse kopanga chifukwa cha kuchuluka kwamphamvutage. overload. or improper operations; Products with severe physical damage:
• Zowonongeka chifukwa cha masoka achilengedwe ndi mphamvu majeure;
• Zolemba za chitsimikizo ndi barcode zawonongeka.
• No contract signed by our company.

1. Repair or replacement provided is the only remedy for customers. Our company is not liable for any incidental or consequential damage unless it is within the law
2. Our company has the right to amend or adjust the terms of this warranty. and release in written form shall prevail.

CHENJEZO

• KUYANG'ANIRA KWAMBIRI: Chida ichi chili ndi batani kapena batire yandalama.
• IMFA kapena kuvulala koopsa kungachitike ngati atamwa.
• Selo yomezedwa ya batani kapena batire yandalama imatha kuyambitsa Kutentha kwa Chemical mkati mwa maola awiri okha.
• KHALANI ndi mabatire atsopano ndi ogwiritsidwa ntchito AKUTI ANA
• Funsani kuchipatala ngati batire ikuganiziridwa kuti yamezedwa kapena kulowetsedwa mkati mwa gawo lililonse la thupi
  • a) Chotsani ndikubwezeretsanso nthawi yomweyo kapena kutaya mabatire omwe agwiritsidwa ntchito molingana ndi malamulo amderalo ndikupewa ana. OSAtaya mabatire mu zinyalala zapakhomo kapena kuwotcha.
  • b) Ngakhale mabatire ogwiritsidwa ntchito amatha kuvulala kwambiri kapena kufa.
  • c) Itanani malo owongolera poyizoni kuti mudziwe zambiri zamankhwala.
  • d) The compatible battery type: CR2032.
  • e) Batire yadzina voltagndi: 3vc.
  • f) Mabatire osachatsidwanso sayenera kuwonjezeredwa.
  • g) Do not force discharge, recharge, disassemble, heat above (manufacturer’s specified temperature rating), or incinerate. Doing so may result in injury due to venting, leakage, or explosion, resulting in chemical burns.
  • h) Onetsetsani kuti mabatire aikidwa moyenera malinga ndi polarity (+ ndi -).
  • i) Osasakaniza mabatire akale ndi atsopano, mitundu yosiyanasiyana ya mabatire, monga alkaline, carbon-zinc, kapena mabatire otha kuchajwanso.
  • j) Chotsani ndikubwezeretsanso nthawi yomweyo kapena kutaya mabatire pazida zosagwiritsidwa ntchito kwa nthawi yayitali molingana ndi malamulo amderalo.
  • k) Nthawi zonse tetezani chipinda cha batri. Ngati chipinda cha batri sichitseka bwino, siyani kugwiritsa ntchito mankhwalawa, chotsani mabatire, ndi kuwasunga kutali ndi ana.

Zolemba / Zothandizira

LTECH LED Controller (Single-zone) [pdf] Buku Logwiritsa Ntchito M1A, M1B, M2A, M2B, M4A, M4B, M5A, M5B, EX4S Single Zone RF-DMX RGBW Controller, EX4S, Single Zone RF-DMX RGBW Controller, RF-DMX RGBW Controller, RGBW Controller, Controller

Maumboni

• Buku Logwiritsa Ntchito