GWIRITSANI NTCHITO MALANGIZO
Terminal Address Programmer
| PRG.PAS.MCS |
| 170 x 112 x 35 mm/ 270 g |
| Plastic case + mechanical keyboard 0°C … 45°C – IP 31 |
| Mphamvu yamagetsi: 9V (batire / batire yowonjezedwanso) |
| Kulumikizana ndi terminal kudzera pa UTP Patch Cable 0.25 cm |
| Maadiresi omwe alipo kuti apange mapulogalamu: pakati pa "000" ndi "998" Kulemba "999" kumamaliza kukonza ma adilesi. |
DESCRIPTION
The PRG.PAS.MCS programmer allows the programming of the address (apartment number) for all types of terminals in the Classic Line range: PAS.17A, PAS.27X, PAS.37X, MCS.47X.
This programmer serves as the mobile alternative to the terminal address programming function, enabling the address to be programmed both on-site and in the office, by a single person.
KULUMIKIZANA KWA TERMINAL
- UTP Patch Cable 0.25 cm
- Kubwerera
- Patsogolo
- Pulogalamu ya PRG.PAS.MCS
- Kanema wokwelera - audio (MCS.47X, PAS.27X, PAS.37X)
ON/ WOZITSA
- The programmer is turned on by pressing the ON key.
- The programmer turns off:
– 3 seconds after entering the last digit of the programmed address;
– 10 seconds after being turned on, if no key is pressed.
KUKHALA MALANGIZO
Gawo 1: Connect the programmer to the terminal.
Gawo 2: Dinani pa ON key on the programmer → The display shows [Positi ya Adresa].
Gawo 3: On the terminal, press and hold the 
kiyi.
Gawo 4: On the programmer, enter the terminal address to be programmed (3 digits required). After entering the last digit, the terminal will issue a confirmation beep, and the key can be released.
07.2025 INS.PRG.PAS.MCS
ANAPANGIDWA ku EU ndi:
Malingaliro a kampani ELECTRA s.r.l
Parc Industrial Miroslava
Str. Principala 33, 707307, Jud. Iasi - RO
+40 232 214.370
sales@electra.ro
www.electra.ro
THANDIZA
Malingaliro a kampani ELECTRA Building Communications GmbH
Gadnergasse 71, Stockwerk 1, Büro Top 132
1110 Wien – AT
+ 43 1 810 20 99
sales@electra-automation.at
www.electra-automation.at
Zolemba / Zothandizira
 |
Electra PAS.17A Terminal Address Programmer [pdf] Buku la Malangizo PAS.17A, PAS.27X, PAS.37X, MCS.47X, PAS.17A Terminal Address Programmer, PAS.17A, Terminal Address Programmer, Address Programmer, Programmer |