Automate Pulse Pro Integration Support

AUTOMATE PULSE PRO KUTHAVIEW
Kwezani luso lanu la Automate pophatikizira mosasunthika mithunzi yamagalimoto mu ELAN Smart Home control system. Automate Pulse PRO imapereka kuphatikizika kwamphamvu ndi kuwongolera mthunzi komanso kulumikizana kwanjira ziwiri, kupereka zosintha zenizeni pamithunzi ndi milingo ya batri. Pokhala ndi ma Ethernet (CAT 5) ndi 2.4GHz opanda zingwe, Pulse PRO imatsimikizira kuphatikizika kosalala kwanyumba kudzera padoko losavuta la RJ45 lomwe lili kuseri kwa likulu. Malo aliwonse amathandizira mithunzi 30, kupangitsa kuti ikhale yankho losunthika pakukhazikitsa kulikonse kwanyumba.

ZATHAVIEW

Wopanga:	Rollease Acmeda
Nambala Yachitsanzo:	Automate Pulse PRO
Mtundu wa Core Module:	8.3
Wopanga Dalaivala:	Zowonjezera 4
Tsiku Lokonzanso Zolemba:	1/24/2025

ZATHAVIEW & SUPPORTED FEATURES
This driver is a Lighting Interface Controller for the Rollease Acmeda Automate Pulse PRO. It allows IP control over Rollease shades from ELAN.

THE FOLLOWING OPTIONS ARE SUPPORTED BY THIS DRIVER:

• Dimmer, Shade, and Louvre lighting devices.
• Realtime feedback of shade positions updated to ELAN Core.
• Open, and Ramp Up commands.
• Close, and Ramp Down commands.
• Stop to halt the movement of rotation or positioning.
• Rotation accurate to 1.8% increments.
• Position accurate to 1% increments.
• Chilichonse chomwe sichinadziwike ngati chothandizira chiyenera kuganiziridwa kuti sichikuthandizira.

AUTOMATE PULSE PRO HUB CONFIGURATION
The hub will need to be installed and configured with the Automate Pulse application. All shades should be configured with the Automate Pulse application before starting the installation of the ELAN driver. Please refer to the Automate Pulse application for step by step instructions on how to add shades to your hub.

KUSINTHA

As with all third-party drivers these do not reside in the typical listing of drivers from ELAN. To add this driver to an ELAN system:

1. Download the. EDRVC file associated with this document if you do not already have it.
2. Place the. EDRVC file pamalo pa kompyuta yanu.
   • We recommend \User\<User>\Documents\Elan\Drivers.
3. In the g! Configurators navigate to the Lighting Interfaces item under Lighting.
4. Navigate to the location you saved the. EDRVC file to and select it.
5. Select “Rollease Acmeda Automate v2” from the list and click “OK”.
6. A prompt will appear saying there will be no support from ELAN, click “OK”.
7. The driver should now be visible under the Lighting Interfaces header.

INSTALATION PROCESS

It is recommended that you follow the below installation process in order to proper functionality with the driver.

1. Select the Interface Type you want to use in Elan to control the shades.
   • You can do this by setting the configuration option “Interface Type” to “Dimmer”, “Shade”, or “Both”.
2. Enter the IP address of the Automate Pulse PRO Hub in the “IP Address” field.
3. Click “Discover Devices” at the bottom of the lighting interface window.
   • Please wait a few seconds for the driver to find all the shades on the hub.
4. At this point your shades should be created under the lighting interface.
   • [Optional] If you want to control the rotation of the shade you can add a Louvre device
5. Select Lighting Devices (None) or any of the shades that have been created.
   • Select “Add New Device”.
   • Select “Louvre Tilt”.
   • Enter the Address of the shade in the “Shade Address” configuration line of the new device.
   • Enter “LOUVRE” (without quotes) into the Device Type field.
6. Bind the devices to user interface components in the custom pages.

ZAMBIRI ZONSE
Gome lotsatirali limapereka zokonda zomwe zimagwiritsidwa ntchito mu Configurator. Pa tebulo ili m'munsimu:

• “<User Defined>”, etc. Type in the desired name for the item.
• “<Auto Detect>”, etc. The system will auto detect this variable.
• “<System>”, etc. The setting has been automatically set by the system. o “<Select>” A dropdown with a list of options.

Zipangizo	Zosintha Dzina	Kukhazikitsa	Ndemanga
Lighting Interface	Dzina	<User Defined>	Default “Rollease Acmed a Automate v2”
	System #		Kutanthauzidwa ndi dongosolo kuzindikira chipangizo
	Status Color Coding		Yathandiza kapena Olumala
	Mkhalidwe		Mkhalidwe wa dalaivala, pomwe zobiriwira ndizabwino komanso zofiira zikutanthauza kuti panali vuto loyika.
	Mtundu wa Driver		Mtundu wa driver
	Wogulitsa Dalaivala		Zowonjezera 4
	Adayika		Tsiku ndi nthawi yomwe dalaivala adayikidwa
	Mtundu wa Chipangizo		Chizindikiro chosonyeza mtundu wa chipangizo chomwe dalaivala ali
	Mithunzi		Mndandanda wa mithunzi yomwe wapeza woyendetsa
	Debug Mode		Sankhani verbosity ya zolembedwa zomwe ziyenera kuwonekera mu Logi Yoyendetsa
	Mtundu wa Chiyankhulo		Sankhani mtundu wa zida zomwe zidzapangidwe zikapezeka
	IP adilesi	<User Defined>	The IP address of the Pulse PRO Hub
	Port	<User Defined>	Defaults to 1487, this should not be changed unless the Hub itself has changed its IP address
Chipangizo Chowala	Dzina	<User Defined>	Dzina la chipangizo
	Malo		Malo a chipangizocho mu polojekitiyi
	System #		Kutanthauzidwa ndi dongosolo kuzindikira chipangizo
	Mtundu wa Chipangizo		Mtundu wa chipangizo
	Hide Device from Scheduler
	Adiresi Yamthunzi	<User Defined>	The address of the shade to control
	Mtundu	<User Defined>	SHADE, DIMMER, or LOUVER.

ZONSE ZONSE

1. Entering the wrong IP address in the “IP Address” configuration line.
   • If you’re failing to discover devices double check this!

ELAN CONTROL SYSTEM CONNECTION

Kuti mudziwe zambiri, funsani wogulitsa wanu, pitani kwathu website pa www.rolleaseacmeda.com.

ZOTHANDIZA:

rolleaseacmeda.com
0 2025 Rollease Acmeda Group

MAFUNSO AMENE AMAFUNSA KAWIRIKAWIRI

No Pulse PRO detected.

Onetsetsani kuti Automate Pulse PRO yanu yaperekedwa pa netiweki yolondola ndikupeza Adilesi ya IP yomwe ilipo ndikulumikizanabe ndi netiweki pogwiritsa ntchito Automate Shades App.

Malire a mthunzi samayikidwa bwino.

Calibrate shade limits with your Rollease Acmeda remote before setting the appropriate open and close time within ELAN SYSTEM.

Mthunzi sukuyenda konse.

Make sure the selected Pulse PRO Hub is the correct Pulse PRO Hub for the shade to be controlled. Confirm the correct bindings are set in the ELAN System connections tab between the Pulse PRO Hub and Shade drivers.

I have multiple Pulse PRO’s, what do I do?

Load two Automate Pulse PRO Hub drivers. After selecting “Retrieve Hubs” located in the driver actions tab, you will see different Automate Pulse PRO Hubs- select the desired one.

Sindikuwona zomangira mthunzi mu driver wa Pulse PRO Hub?

Sankhani "Bweretsani Mithunzi" yomwe ili mu tabu zochita zoyendetsa.

How do I scan for available Automate Pulse PRO?

Once the Automate Pulse PRO Hub is properly connected via the Ethernet cable or Wireless network, navigate to the Automate Pulse PRO Hub Properties page within Composer. Select “Retrieve Hubs” located in the driver actions tab.

We get unexpected responses from the ELAN system, or “?” symbols

Ensure that all connections using the ethernet port or Wi-Fi are working properly. The missed connection has been known to yield unwanted or unexpected results.

Zolemba / Zothandizira

AUTOMATE Automate Pulse Pro Integration Support [pdf] Buku Logwiritsa Ntchito 8.3, annex4, Automate Pulse Pro Integration Support, Automate Pulse Pro, Integration Support, Support

Maumboni

• Buku Logwiritsa Ntchito