KAIWEETS HT100s-R Voltage Tester and KT301T GFCI Outlet Tester Instruction Manual

1. Mawu Oyamba

This instruction manual provides essential information for the safe and proper operation of your KAIWEETS HT100s-R Non-Contact Voltage Tester and KAIWEETS KT301T GFCI Outlet Tester. Please read this manual thoroughly before use and retain it for future reference. These devices are designed to assist in electrical testing and ensure safety in various applications.

2. Zambiri Zachitetezo

Always prioritize safety when working with electricity. Follow all local electrical codes and safety regulations. Do not use the testers if they appear damaged or are not functioning correctly. Always wear appropriate personal protective equipment (PPE).

Musapitirire kuchuluka kwa voliyumutage ratings specified for each device.
Ensure the battery compartment is securely closed before use.
Do not attempt to repair or modify the devices. Contact customer support for assistance.
Verify the tester's operation on a known live circuit before testing an unknown circuit.

3. KAIWEETS HT100s-R Non-Contact Voltagndi Tester

3.1 Zogulitsa

Non-Contact AC VoltagKuzindikira (NCV)
Adjustable Sensitivity Modes (High: 12-1000V, Low: 70-1000V)
Visual and Audible Alarms
Live/Null Wire Identification
Breakpoint Test Function
Integrated LED Tochi
Kuzimitsa Kwadzidzidzi

3.2 Setup and Battery Installation

The HT100s-R requires 2 AAA batteries (included). To install or replace batteries:

Twist the tail cap counter-clockwise to open the battery compartment.
Ikani mabatire awiri a AAA, mukuwona polarity yolondola (+/-).
Replace the tail cap and twist clockwise to secure it.

3.3 Malangizo Ogwiritsira Ntchito

3.3.1 Kuyatsa/Kuzimitsa

Dinani batani lamagetsi (⏻) to turn the device on. Press and hold the power button to turn it off. The device will automatically power off after a period of inactivity to conserve battery.

3.3.2 Osalumikizana Voltage (NCV) Kuzindikira

Place the tip of the tester near the conductor, outlet, or wire you wish to test. If AC voltage is detected, the tip will glow red, and an audible beep will sound. The frequency of the beeps and the percentage value on the screen will increase with higher voltage or closer proximity to the source.

KAIWEETS HT100s-R Non-Contact Voltage Tester detecting voltage in an electrical outlet.

Image: The HT100s-R tester being used to detect voltage in an electrical outlet. The tip glows red, indicating voltagndi kupezeka.

3.3.3 Kusintha kwa Sensitivity

The HT100s-R features two sensitivity modes:

High Sensitivity Mode (12-1000V): Suitable for detecting lower voltages or detecting voltage through insulation.
Low Sensitivity Mode (70-1000V): Ideal for distinguishing live wires in close proximity or for higher voltagndi kuzindikira.

The screen color indicates voltagmulingo e: Chofiira za high voltage/live wire, Green za low voltage/null wire.

KAIWEETS HT100s-R showing high and low sensitivity modes for null and live wire detection.

Image: Illustrations demonstrating the HT100s-R in both high and low sensitivity modes, indicating detection of null and live wires with corresponding visual and audible feedback.

3.3.4 Breakpoint Test

To perform a breakpoint test, move the tester along an insulated wire. The tester will indicate the presence of voltage up to the point of the break, helping to locate faults in cables.

KAIWEETS HT100s-R performing a breakpoint test on an insulated cable.

Image: The HT100s-R being used to perform a breakpoint test on an insulated electrical cable, illustrating its ability to detect breaks.

3.3.5 Kuwala kwa LED

Press the flashlight button (💡) to turn on the integrated LED flashlight. This feature is useful for illuminating dimly lit work areas.

KAIWEETS HT100s-R with its LED flashlight illuminated in a dark electrical panel.

Image: The HT100s-R's bright LED flashlight illuminating a dark electrical panel, demonstrating its utility in low-light conditions.

4. KAIWEETS KT301T GFCI Outlet Tester

4.1 Zogulitsa

GFCI Test Ntchito
Standard Outlet Wiring Condition Detection
Clear LCD Display with Real-time Voltage
Bottom Indicator Lights for Enhanced Visibility
Auto-Hold Data Function (5 minutes)
Chidziwitso cha Battery Yochepa
5-Minute Auto Power-Off
CAT II 110-125V Safety Rating

KAIWEETS KT301T GFCI Outlet Tester displaying its features and design.

Chithunzi: Kuthaview of the KAIWEETS KT301T GFCI Outlet Tester, highlighting its key features such as auto-hold, GFCI testing, LCD display, and low battery alert.

4.2 Setup and Battery Installation

The KT301T requires 2 AAA batteries (included). To install or replace batteries, open the battery compartment located on the back of the device, insert the batteries with correct polarity, and close the compartment securely.

4.3 Malangizo Ogwiritsira Ntchito

4.3.1 Standard Outlet Testing

Plug the KT301T directly into a standard 3-prong outlet. The LCD display will immediately show the real-time voltage and the wiring condition. The bottom indicator lights will also provide a quick visual status (e.g., green for correct, orange for faults).

KAIWEETS KT301T testing both a standard outlet and a GFCI outlet.

Image: The KT301T in use, demonstrating its capability to test both standard electrical outlets and GFCI outlets, displaying voltage and wiring status.

4.3.2 GFCI Outlet Testing

After plugging the KT301T into a GFCI outlet and observing the initial wiring status, press the MAYESO button. A correctly functioning GFCI outlet should trip, cutting power to the outlet. Press the Bwezeraninso button on the GFCI outlet to restore power. If the GFCI does not trip, it indicates a fault.

4.3.3 LCD Display ndi Zizindikiro

The 1.8-inch backlit LCD color screen provides clear readings of voltage and wiring status. Green indicates correct wiring, while orange indicates a fault. The bottom indicator lights offer additional visual cues, especially in dark environments.

KAIWEETS KT301T's backlit LCD color screen displaying voltage and wiring status.

Image: A close-up of the KT301T's 1.8-inch backlit LCD color screen, showing a clear display of voltage and correct wiring status, suitable for various lighting conditions.

4.3.4 Auto-Hold Data

The auto-hold function captures and locks the test results on the screen for 5 minutes, allowing for easy viewing even in hard-to-reach locations or after removing the tester from the outlet.

KAIWEETS KT301T demonstrating the hands-free data hold function.

Image: The KT301T demonstrating its hands-free data hold feature, which locks the reading on the screen for convenient viewing after testing an outlet.

5. Kusamalira

Kuyeretsa: Wipe the devices with a dry, soft cloth. Do not use abrasive cleaners or solvents.
Kusintha kwa Battery: Replace batteries when the low battery indicator appears or if the device does not power on. Always use new, high-quality AAA batteries.
Kusungirako: Store the testers in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods to prevent leakage.

6. Mavuto

Vuto	Chifukwa Chotheka	Yankho
Chipangizo sichimayatsidwa.	Mabatire akufa kapena oyika molakwika.	Sinthani mabatire, kuonetsetsa kuti polarity ndi yolondola.
HT100s-R gives inconsistent readings.	Interference from nearby electrical fields; incorrect sensitivity mode.	Move away from other electrical devices; switch to low sensitivity mode if appropriate.
KT301T shows a fault, but outlet seems to work.	Hidden wiring fault (e.g., open ground, open neutral, reverse polarity).	Consult a qualified electrician to inspect the wiring.
KT301T GFCI test does not trip.	Faulty GFCI outlet or incorrect wiring.	Do not use the outlet. Have a qualified electrician inspect and repair/replace the GFCI outlet.

7. Zofotokozera

7.1 KAIWEETS HT100s-R Non-Contact Voltagndi Tester

AC Voltage manambala: 12V - 1000V (High Sensitivity), 70V - 1000V (Low Sensitivity)
pafupipafupi50/60Hz
Alamu Mode: Sound and Light
Tochi: Yes, LED
Kutsegula Magalimoto: Inde
Batiri2 x AAA (yophatikizidwa)
Mayeso a Chitetezo: CAT III 1000V, CAT IV 600V

7.2 KAIWEETS KT301T GFCI Outlet Tester

Opaleshoni Voltage: 110V - 125V AC
GFCI Ulendo Wamakonomphamvu: 5mA
Onetsani: 1.8-inch Backlit LCD Color Screen
Wiring Indications: Correct, Open Ground, Open Neutral, Open Hot, Hot/Ground Reverse, Hot/Neutral Reverse
Gwirani Modzigwira: Yes (5 minutes)
Kutsegula Magalimoto: Yes (5 minutes)
Batiri2 x AAA (yophatikizidwa)
Mayeso a ChitetezoMphamvu: CAT II 125V

8. Chitsimikizo ndi Thandizo la Makasitomala

KAIWEETS provides a 3-zaka chitsimikizo for these products. If you encounter any issues or have questions regarding the operation, maintenance, or troubleshooting of your HT100s-R Voltage Tester or KT301T GFCI Outlet Tester, please contact KAIWEETS customer support for professional assistance.

For support, visit the official KAIWEETS webtsamba kapena tchulani zidziwitso zoperekedwa ndi katundu wanu.

	KAIWEETS KT301P Digital Circuit Breaker Finder User Manual User manual for the KAIWEETS KT301P Digital Circuit Breaker Finder, detailing its features, usage, and specifications for identifying circuit breakers and testing wiring conditions.
	Kaiweets KM117B Receptacle Tester Instructions and Safety Guide Comprehensive guide for the Kaiweets KM117B Receptacle Tester, detailing its features for detecting wiring problems, GFCI testing, and voltage measurements. Includes safety warnings and technical specifications.
	KAIWEETS KT301P Digital Circuit Breaker Finder User Manual User manual for the KAIWEETS KT301P Digital Circuit Breaker Finder, detailing features, safety warnings, operating instructions, and accessory usage for locating circuit breakers and testing wiring conditions.
	KAIWEETS VT200 Non-contact Voltage Tester Operation Manual Official operation manual for the KAIWEETS VT200 non-contact voltage tester, providing detailed instructions on usage, safety features, product overview, specifications luso, ndi kukonza.
	VT200 Non-Contact Voltage Detector User Manual User manual for the Kaiweets VT200 non-contact voltage detector, covering safety precautions, product overview, operation, battery replacement, and general specifications.
	KAIWEETS ST120 Smart Pen-type Multimeter Operation Manual This manual provides detailed instructions for operating the KAIWEETS ST120 Smart Pen-type Multimeter, including safety precautions, product overview, measurement functions, technical specifications, and maintenance procedures.

KAIWEETS HT100s-R, KT301T