ECOELER 6-Inch Motion Sensor LED Ceiling Light

1. Mawu Oyamba

Thank you for choosing the ECOELER 6-Inch Motion Sensor LED Ceiling Light. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new lighting fixture. Please read this manual thoroughly before installation and retain it for future reference.

Chithunzi 1.1: Patsogolo view of the ECOELER 6-Inch Motion Sensor LED Ceiling Light.

2. Zambiri Zachitetezo

To reduce the risk of fire, electric shock, or personal injury, always follow these basic safety precautions:

• CHENJEZO: Kuopsa kwa Kugwedezeka kwa Magetsi. Lumikizani mphamvu pa fuse kapena chophwanyika musanayike kapena kutumizira.
• Izi ziyenera kukhazikitsidwa motsatira malamulo oyika omwe akugwiritsidwa ntchito ndi munthu wodziwa ntchito yomanga ndikugwiritsa ntchito mankhwalawo komanso zoopsa zomwe zingachitike.
• Use only 120V AC, 60Hz circuits.
• Musayese kusokoneza kapena kusintha chogwiriracho. Mulibe zida zomwe zingagwiritsidwe ntchito mkati.
• Onetsetsani kuti zolumikizira zonse ndi zotetezeka komanso zotetezedwa bwino.
• Chida ichi ndi choyenera kugwiritsidwa ntchito m'nyumba zokha.

3. Zamkatimu Phukusi

Onetsetsani kuti zigawo zonse zilipo musanayambe kukhazikitsa:

• 6-Inch Black Motion Sensor LED Ceiling Light (x1)
• Zipangizo Zoyikira (zomangira, mawaya)
• E26 Adapter Accessories (for recessed can installation)
• Buku Lachidziwitso (chikalata ichi)

Image 3.1: Included accessories for installation.

4. Zinthu Zogulitsa

• 3CCT Selectable: Choose between 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight) color temperatures.
• Sensor Yoyenda: Passive Infrared (PIR) sensor detects motion within 9-16 feet.
• Kuchedwa Kwanthawi Yosinthika: Set the light to remain on for 30 seconds, 1 minute, or 5 minutes after motion ceases.
• Sensor Yowala: The motion sensor functions only in dark environments, remaining off during daylight hours.
• Kugwiritsa Ntchito Mphamvu: 16W LED provides 1000 lumens of brightness.
• Kuyika Kosiyanasiyana: Compatible with 3.5 or 4-inch junction boxes and 5 or 6-inch recessed cans.

Image 4.1: Key features including PIR sensor, 3CCT, and time delay settings.

5. Kukhazikitsa ndi Kuyika

Before installation, ensure the power supply is turned off at the circuit breaker.

5.1. Junction Box Installation

1. Chotsani disolo poyipotoza molunjika.
2. Connect the supply wires to the fixture wires using the provided wire nuts: black to black (live), white to white (neutral), and green/bare copper to green (ground).
3. Attach the fixture base to the junction box using the provided screws.
4. Twist the lens counter-clockwise to secure it back onto the fixture.

5.2. Recessed Can Installation

1. Chotsani disolo poyipotoza molunjika.
2. Install the spring clips onto the fixture base using screws.
3. Connect the E26 adapter to the existing socket in the recessed can.
4. Connect the fixture wires to the E26 adapter wires using wire nuts.
5. Push the disk light into the recessed can until the spring clips secure it.
6. Twist the lens counter-clockwise to secure it back onto the fixture.

Image 5.1: Installation diagrams for junction box and recessed can.

6. Malangizo Ogwiritsira Ntchito

After successful installation and restoring power, the light will be ready for operation. The ECOELER motion sensor light operates automatically based on ambient light and motion detection.

6.1. Kugwira Ntchito kwa Sensor Yoyenda

• Masana: The light remains off even if motion is detected, due to the integrated light sensor.
• Nighttime/Dark Environments: The light will automatically turn on when motion is sensed within its detection range (approximately 9-16 feet).
• The light will turn off after the set time delay if no further motion is detected.

Image 6.1: Motion sensor operation during day and night.

6.2. Color Temperature (CCT) Adjustment

The fixture offers three color temperature options: 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight). To adjust the CCT:

1. Onetsetsani kuti magetsi azimitsa.
2. Carefully remove the lens by twisting it clockwise.
3. Locate the CCT selector switch on the LED board (refer to Image 4.1).
4. Slide the switch to your desired color temperature setting (3000K, 4000K, or 5000K).
5. Replace the lens by twisting it counter-clockwise.
6. Restore power to test the new setting.

Image 6.2: Visual representation of 3CCT options.

6.3. Time Delay Adjustment

The light can be set to remain on for 30 seconds, 1 minute, or 5 minutes after motion is no longer detected. To adjust the time delay:

1. Onetsetsani kuti magetsi azimitsa.
2. Carefully remove the lens by twisting it clockwise.
3. Locate the time delay selector switch on the fixture (refer to Image 4.1).
4. Slide the switch to your desired time setting (30s, 1min, or 5mins).
5. Replace the lens by twisting it counter-clockwise.
6. Restore power to test the new setting.

Image 6.3: Time delay countdown feature.

7. Kusamalira

The ECOELER LED ceiling light requires minimal maintenance.

• Kuyeretsa: Onetsetsani kuti magetsi azimitsidwa musanatsuke. Pukutani chogwiriracho ndi chofewa, chouma, kapena chopepuka pang'ono.amp cloth. Do not use harsh chemicals or abrasive cleaners, as they may damage the finish or electronic components.
• Lens: Keep the lens clean to ensure optimal light output and motion sensor performance.

8. Mavuto

If you experience issues with your ECOELER LED ceiling light, refer to the following common problems and solutions:

9. Zofotokozera

10. Chitsimikizo ndi Thandizo

This ECOELER product is backed by a Limited Warranty. For specific warranty details and duration, please refer to the documentation included with your purchase or contact ECOELER customer support.

For technical assistance, troubleshooting, or warranty claims, please contact ECOELER customer support through the retailer where the product was purchased or visit the official ECOELER webmalo.

Wopanga: ECOELER ELECTRIC INC