HASWING Cayman 50700-137B Electric Trolling Motor Instruction Manual

1. Mawu Oyamba

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your HASWING Cayman 50700-137B Electric Trolling Motor. Designed for both saltwater and freshwater use, this 12V, 55LB thrust motor features a 54-inch shaft and comes with a remote control for versatile navigation. Please read this manual thoroughly before installation and use.

Figure 1.1: HASWING Cayman 50700-137B Electric Trolling Motor with Remote Control.

2. Kukhazikitsa ndi Kuyika

2.1. Unboxing ndi Component Check

Carefully unpack all components and verify against the packing list. Ensure all parts are present and undamaged before proceeding with installation.

2.2. Mounting the Trolling Motor

The Cayman 50700-137B is a bow-mount trolling motor. Securely attach the motor to the bow of your boat using appropriate hardware. Ensure the mounting surface is strong enough to support the motor's weight and thrust.

Figure 2.1: Detail of the bow mount mechanism.

For a detailed visual guide on installation, refer to the video below:

2.3. Kulumikizana kwa Battery

Connect the motor to a 12V deep cycle battery (1x 105AH recommended). Ensure correct polarity: red to positive (+), black to negative (-). Use appropriate marine-grade connectors and ensure all connections are tight and secure.

Figure 2.2: Control panel showing the LED power display for battery status.

2.4. Kuyika kwa Propeller

Install the three-blade propeller onto the motor shaft. Align the drive pin with the shaft hole and the cross-shaped groove of the propeller. Secure it with the provided stainless steel washer and nut. Tighten the nut firmly, but do not overtighten to avoid damage.

Figure 2.3: The three-blade propeller.

2.5. Kutalikirana Kwakutali

To pair the 2.4G wireless remote control with the motor:

1. Ensure the motor is connected to the battery and the shaft is vertical.
2. Press and hold the 'Turtle' (speed down) button on the remote and the 'Magnifying Glass' button on the motor's control panel simultaneously for 5 seconds.
3. You will hear three beeps, indicating a successful connection. Release both buttons.

Figure 2.4: The 2.4G wireless remote control with labeled buttons.

For a visual demonstration of the pairing process, watch this video:

3. Malangizo Ogwiritsira Ntchito

3.1. Kutali Ntchito Nchito

The wireless remote control allows for precise command of your trolling motor:

• Yatsani/KUZImitsa: Press the designated button to activate or deactivate the motor.
• Kuwongolera Liwiro: Use the 'Speed Up' and 'Speed Down' buttons for variable speed adjustments.
• Chiwongolero: Utilize the 'Turn Left' and 'Turn Right' buttons for directional control. The motor offers 360-degree electric steering.
• Liwiro Lathunthu: A dedicated button provides instant maximum thrust.
• Reboot Key: Use this button to reset the remote connection if needed.

3.2. Kusintha Kwakuya

The motor features an adjustable depth collar on the cast aluminum alloy shaft. Loosen the collar, adjust the motor to the desired depth, and then securely tighten the collar to prevent movement during operation.

3.3. Stow and Deploy

To deploy the motor, release the latch and carefully lower the motor into the water. To stow, lift the motor out of the water and secure it in the stowed position using the lift handle and latch mechanism.

4. Kusamalira

4.1. Propeller Care

Regularly inspect the propeller for weeds, fishing line, or damage. Clean the propeller after each use, especially in weedy areas. Replace damaged propellers immediately to maintain efficiency and prevent further motor damage.

4.2. Shaft and Motor Housing

After each use, especially in saltwater, rinse the shaft and motor housing with fresh water to remove salt and debris. Inspect for any signs of corrosion or wear. Apply a marine-grade protective spray if necessary.

4.3. Kusamalira Battery

Ensure your 12V deep cycle battery is properly charged before each outing. Store the battery in a cool, dry place when not in use and keep terminals clean and free of corrosion.

5. Mavuto

• Mota Siikuyankhidwa: Check battery connections, ensure the remote is paired, and verify the battery charge level.
• Kutali Kosagwirizanitsa: Repeat the pairing procedure (Section 2.5). Ensure the remote battery is functional.
• Reduced Power/Performance: Inspect the propeller for obstructions or damage. Check battery voltage ndi mgwirizano.
• Phokoso Lachilendo: Immediately stop the motor and inspect the propeller and shaft for any foreign objects or damage.

6. Zofotokozera

7. Chitsimikizo ndi Thandizo

For warranty information, technical support, or any product-related inquiries, please contact HASWING customer service directly. Refer to the product packaging or the official HASWING webwebusayiti kuti mudziwe zambiri zaposachedwa.