Amazon Basics Portable Ceramic Electric Heater

1. Zofunika Zachitetezo

Please read this entire manual carefully before using the heater. Failure to follow these instructions could result in fire, electric shock, injury, or property damage. Keep this manual for future reference.

• Kuyika: Always place the heater on a firm, level surface. Do not place on soft surfaces like beds or rugs where openings may be blocked.
• Chilolezo: Maintain a minimum distance of 1 meter (3 feet) from walls, furniture, curtains, and other combustible materials.
• Magetsi: Ensure the heater is connected to a grounded outlet of the correct voltage (220-240V, 50Hz). Do not overload electrical circuits.
• Zingwe Zowonjezera: Avoid using extension cords. If one is necessary, ensure it is heavy-duty and rated for the heater's wattage.
• Chinyezi: Osagwiritsa ntchito chotenthetsera chinyowa kapena damp locations, such as bathrooms or laundry areas. Keep away from water sources.
• Kuyang'anira: Do not leave the heater unattended while in use. Always unplug the heater when not in use.
• Ana ndi Ziweto: Keep children and pets away from the heater. The surface can become hot during operation.
• Chitetezo cha Kutentha Kwambiri: This heater is equipped with an automatic overheat protection system. If the heater overheats, it will shut off automatically. Unplug the heater, allow it to cool for 30 minutes, then plug it back in.
• Kusintha kwa Tip-Over: The heater includes a safety tip-over switch that automatically turns off the unit if it is accidentally knocked over.
• Kusamalira: Do not attempt to repair or modify the heater yourself. Refer all servicing to qualified personnel.

2. Zamkatimu Phukusi

Carefully unpack the box and ensure all items are present and in good condition.

• Amazon Basics Portable Ceramic Electric Heater
• Remote Control (with 1 x 12V battery included)
• Buku Logwiritsa Ntchito

3. Zamalonda Zathaview

Familiarize yourself with the components and controls of your heater.

Chithunzi 1: Patsogolo view of the Amazon Basics Portable Ceramic Electric Heater.

Control Panel ndi Display

Figure 2: Digital control panel and display showing current temperature.

• Batani Lamphamvu: Kuyatsa kapena kuzimitsa chotenthetsera.
• Batani la Modi: Cycles through heating modes (High, Medium, Low, ECO, Fan Only).
• Mabatani a Kutentha / Kutsika: Imasintha kutentha komwe mukufuna (5-35°C).
• Batani Lotsalira: Imayatsa kapena kuletsa ntchito ya 70° yosinthasintha.
• Batani la Nthawi: Sets the 24-hour programmable timer.
• Kuwonetsera kwadongosolo: Ikuwonetsa kutentha kwamakono, mawonekedwe osankhidwa, ndi makonda a nthawi.

Kuwongolera Kwakutali

The remote control provides convenient access to all heater functions. Ensure the 12V battery is correctly installed.

Figure 3: The heater shown with its included remote control.

4. Kukhazikitsa

1. Chotsani: Remove the heater and all packaging materials from the box.
2. Kuyika: Place the heater on a stable, flat, and heat-resistant surface. Ensure it is at least 1 meter (3 feet) away from any walls, furniture, or other objects.
3. Kulumikiza Mphamvu: Plug the power cord into a standard 220-240V, 50Hz grounded electrical outlet. Ensure the outlet is not overloaded by other appliances.
4. Battery Yakutali: If not already installed, open the battery compartment on the remote control and insert the 12V battery, observing correct polarity.

5. Malangizo Ogwiritsira Ntchito

Kuyatsa/Kuzimitsa

• Dinani pa Mphamvu batani on the control panel or remote control to turn the heater on. The digital display will illuminate.
• Dinani pa Mphamvu batani again to turn the heater off.

Selecting Heating Mode

With the heater on, press the Mode batani repeatedly to cycle through the available modes:

• Kutentha Kwambiri: Provides maximum heating output (1800W).
• Kutentha kwapakati: Provides moderate heating output.
• Kutentha Kwambiri: Provides minimal heating output.
• Njira ya ECO: The heater automatically adjusts its power output to maintain the set temperature, optimizing energy consumption.
• Mafani Okha: Operates as a fan without heat.

Kukhazikitsa Kutentha

In any heating mode (High, Medium, Low, ECO), you can set your desired temperature:

• Gwiritsani ntchito Kutentha Kukwera (+) or Pansi (-) buttons on the control panel or remote control.
• The temperature can be set between 5°C and 35°C, with precise 1°C adjustments.
• Chotenthetseracho chidzayatsa kapena kuzimitsa chokha kuti chisunge kutentha komwe kwayikidwa.

Ntchito ya Oscillation

To distribute heat evenly across a wider area:

• Dinani pa Oscillation batani on the control panel or remote control. The heater will begin to rotate 70° from side to side.
• Dinani pa Oscillation batani again to stop the oscillation.

Kukhazikitsa Nthawi

The 24-hour programmable timer allows you to set a duration for the heater to operate before automatically turning off.

1. With the heater on, press the batani la nthawi. The display will show "00".
2. Gwiritsani ntchito Kutentha Kukwera (+) or Pansi (-) buttons to set the desired number of hours (1-24).
3. Once the desired time is set, the timer will activate after a few seconds. The display will show the remaining time before switching back to the temperature display.
4. Kuti musiye chowerengera, dinani batani batani la nthawi until "00" is displayed, or turn off the heater.

6. Kusamalira

Regular cleaning and proper storage will help ensure the longevity and efficient operation of your heater.

Kuyeretsa

1. Nthawi zonse chotsani chotenthetsera ndipo mulole kuti izizire bwino musanatsuke.
2. Pukuta kunja ndi chofewa, damp nsalu. Osagwiritsa ntchito zotsukira abrasive kapena solvents.
3. Use a vacuum cleaner with a brush attachment to gently remove dust from the air intake and exhaust grilles.
4. Onetsetsani kuti madzi kapena zakumwa sizilowa mkati mwa chotenthetsera.

Kusungirako

• Unplug the heater and allow it to cool completely.
• Clean the heater as described above.
• Store the heater in its original packaging or a suitable container in a cool, dry place.
• Musaike zinthu zolemera pamwamba pa chotenthetsera pamene mukusunga.

7. Mavuto

If you experience issues with your heater, refer to the following common problems and solutions.

Ngati vutoli likupitilira mutatha kuyesa njirazi, funsani chithandizo chamakasitomala.

8. Zofotokozera

Technical details for the Amazon Basics Portable Ceramic Electric Heater.

Figure 4: Dimensions of the heater: 17cm (L) x 15.5cm (W) x 25.4cm (H).

• Nambala Yachitsanzo: DQ2508R-EU
• Mtundu: Amazon Basics
• Mtundu: Portable Ceramic Electric Heater
• Kutulutsa Mphamvu: 1800W
• Voltage: 220-240V
• pafupipafupi: 50Hz pa
• Makulidwe (L x W x H): 17cm x 15.5cm x 25.4cm
• Kulemera kwake: Pafupifupi 1.7 kg
• Kuchotsa: 70°
• Kutentha: 5°C -35°C
• Zapadera: Overheat Protection, Tip-Over Switch, Digital Display, Remote Control, 24-Hour Timer, ECO Mode
• Mtundu: Imvi
• Kugwiritsa Ntchito M'nyumba / Panja: Kugwiritsa Ntchito M'nyumba Pokha

9. Chitsimikizo ndi Thandizo

For warranty information or customer support, please refer to the documentation provided at the time of purchase or visit the official Amazon Basics website. Do not attempt to open or repair the product yourself, as this may void the warranty and pose safety risks.