1. Zamalonda Zathaview
The Subsonic SA5632 DualSense Controller Charging Station is designed to efficiently charge up to two Sony PS5 DualSense controllers simultaneously. Its compact design ensures easy storage and integration into your gaming setup. The station connects directly to your console via the included USB-C cable and features an intelligent chip for enhanced safety during charging.
2. Zamkatimu Phukusi
Chonde onetsetsani kuti zonse zomwe zalembedwa pansipa zikuphatikizidwa mu phukusi lanu:
- 1 x Subsonic DualSense Controller Charging Station
- 1 x USB-C Charging Cable (80 cm)
3. Kukhazikitsa
Follow these steps to set up your Subsonic DualSense Controller Charging Station:
- Lumikizani Power Cable: Insert one end of the provided USB-C cable into the charging port on the back of the charging station. Connect the other end of the USB-C cable to a compatible USB port on your PS5 console or a USB wall adapter (not included).
- Kuyika: Place the charging station on a stable, flat surface near your PS5 console. Its compact design allows for convenient placement.
- Attach Controllers: Align your PS5 DualSense controllers with the charging ports on the station and gently slide them into place. Ensure they are securely seated for proper connection.
4. Malangizo Ogwiritsira Ntchito
The charging station is designed for simple and intuitive operation:
- Initiating Charge: Once controllers are correctly placed on the station and the station is powered, charging will begin automatically.
- Zizindikiro Zolipirira: The station features LED indicators to show the charging status. The lights will glow orange while the controllers are charging.
- Chizindikiro Chokwanira: When a controller is fully charged, the corresponding LED indicator will turn blue.
- Nthawi yolipira: A single PS5 DualSense controller typically takes approximately 2.5 to 3 hours to fully charge from empty.
5. Zambiri Zachitetezo
The Subsonic DualSense Controller Charging Station is equipped with an intelligent chip to protect your controllers and the charging station itself. This includes protection against:
- Overcurrent
- Short-circuiting
- Kupambanatage
- Kutentha kwambiri
Always ensure the charging station is placed on a stable surface and away from liquids or excessive heat sources.
6. Zofotokozera
| Mbali | Tsatanetsatane |
|---|---|
| Nambala ya Model | Mtengo wa SA5632 |
| Miyeso Yazinthu | 5.31 x 2.36 x 1.18 mainchesi |
| Kulemera kwa chinthu | 2.19 pawo |
| Zakuthupi | Pulasitiki |
| Mtundu Wolumikizira | USB-C |
| Zida Zogwirizana | Sony DualSense controllers for PS5 |
| Madoko Onse a USB | 2 |
| Wattage | 100 watts |
| Kutulutsa Voltage | 5 volts |
7. Mavuto
- Controllers not charging:
- Ensure the USB-C cable is securely connected to both the charging station and the power source (PS5 console or wall adapter).
- Onetsetsani kuti gwero lamagetsi likugwira ntchito.
- Check if the controllers are correctly seated in the charging slots.
- Yesani kugwiritsa ntchito doko la USB lina kapena chosinthira magetsi.
- Zizindikiro za LED sizikugwira ntchito:
- Confirm the charging station is receiving power.
- Ensure controllers are properly connected.
- Kuyitanitsa pang'onopang'ono:
- Ensure the power source provides sufficient output (e.g., a dedicated wall adapter might charge faster than a console USB port).
- Avoid using excessively long or low-quality USB-C cables.
8. Kusamalira
To ensure the longevity and optimal performance of your charging station:
- Sungani chipangizocho mwaukhondo pochipukuta ndi nsalu yofewa, youma.
- Avoid exposing the charging station to water or other liquids.
- Musayese kumasula kapena kukonza chipangizocho nokha.
- Sungani pamalo ozizira, owuma osagwiritsidwa ntchito.
9. Chitsimikizo ndi Thandizo
For warranty information or technical support, please refer to the contact details provided with your product packaging or visit the official SUBSONIC webmalo. Sungani umboni wanu wogula pazolinga zilizonse za chitsimikizo.
