TRUE MODS Black HD Harley Davidson Tail Light Base Plate Replacement (Part# 68296-99A) Instruction Manual

1. Mawu Oyamba

This instruction manual provides comprehensive guidance for the installation, operation, and maintenance of your TRUE MODS Black HD Harley Davidson Tail Light Base Plate Replacement. Designed as a direct alternative to OEM Part 68296-99A, this base plate is crafted from durable ABS material and features a glossy finish. It includes a protective foam pad to prevent scratches during and after installation, ensuring a secure and aesthetically pleasing upgrade for your motorcycle.

Please read this manual thoroughly before beginning installation to ensure proper fitment and functionality.

2. Kugwirizana

This tail light base plate is designed to be a perfect alternative for OEM Part 68296-99A on 2000-2023 Harley Davidson OEM Fenders. It is compatible with various models including Sportster, Dyna, Road King, Electra Glide, Heritage, and Softail from 2000 onwards.

Important Note: This product DOES NOT fit 2018-2023 Softail models or 2012-2016 Dyna Switchback (FLD) models.

3. Zamkatimu Phukusi

Onetsetsani kuti zinthu zonse zilipo ndipo sizinawonongeke mukatsegula phukusi:

• 1x Tail Light Base Plate Replacement (Black or Chrome, depending on selection)
• Stainless Steel Screws (for tail light and circuit board)
• Protective Foam Pad

4. Kukhazikitsa ndi Kuyika

Before starting, ensure your motorcycle is turned off and cooled down. Gather necessary tools such as a screwdriver.

1. Remove Existing Tail Light: Carefully remove the two screws securing your existing tail light to the fender. Gently pull the tail light assembly away from the fender.
2. Chotsani Wiring: Unhook the pigtail connector from the existing tail light.
3. Prepare New Base Plate: Attach the protective foam pad to the back of the new TRUE MODS base plate.
4. Lumikizani Wiring (ngati kuli kotheka): If your new tail light (not included with base plate) requires wiring, connect the corresponding lines to each hole and insert the adapter into the hole of the lamp. (Refer to specific tail light instructions for wiring details).
5. Install New Base Plate: Align the new base plate with the mounting holes on your Harley Davidson OEM fender.
6. Mbale Yokhazikika Yotetezeka: Use the provided stainless steel screws to securely fasten the new base plate. Ensure it is snug but do not overtighten.
7. Re-connect Tail Light: Re-connect the tail light's pigtail connector to the motorcycle's wiring harness.
8. Mayendedwe Oyesera: Turn on your motorcycle and test the running light, brake light, and turn signals to ensure all functions are operational.

Installation Video (Example for a similar tail light, general steps apply):

5. Ntchito

The TRUE MODS Tail Light Base Plate Replacement functions as a mounting bracket for your Harley Davidson tail light. Its operation is directly tied to the tail light assembly it supports.

• Running Light: When your motorcycle's ignition is on, the tail light will illuminate, providing constant rear visibility.
• Kuwala kwa Brake: When the brake lever or pedal is engaged, the tail light will illuminate brighter to signal braking.
• Sinthani Zizindikiro: If your tail light assembly integrates turn signals, they will flash when activated, indicating your intended direction.

6. Kusamalira

To ensure the longevity and optimal performance of your tail light base plate, follow these maintenance guidelines:

• Kuyeretsa Nthawi Zonse: Clean the base plate regularly with a soft cloth and mild soap to remove dirt and grime. Avoid abrasive cleaners that could damage the glossy finish.
• Yang'anani Fasteners: Periodically check the stainless steel screws to ensure they remain tight. Vibrations from riding can sometimes loosen fasteners over time.
• Check Foam Pad: Inspect the protective foam pad for any signs of wear or damage. Replace if necessary to maintain scratch protection.
• Pewani Mankhwala Owopsa: Do not use harsh chemicals or solvents on the base plate, as this can degrade the ABS material and finish.

7. Mavuto

If you encounter any issues after installing the tail light base plate, consider the following:

8. Zofotokozera

9. Chitsimikizo ndi Thandizo

For warranty information or technical support, please contact the manufacturer, TRUE MODS, or the seller, OnlineLEDStore, directly through their official channels. Refer to your purchase documentation for specific warranty terms and contact details.

OnlineLEDStore's Amazon Store: Pitani ku Store