AXIS Q6225-LE PTZ Buku Logwiritsa Ntchito Kamera

1. Mawu Oyamba

This user manual provides comprehensive instructions for the installation, operation, and maintenance of the Axis Communications AXIS Q6225-LE PTZ Camera. Please read this manual thoroughly before using the product to ensure proper functionality and safety. This camera is designed for robust outdoor surveillance in challenging conditions.

2. Zambiri Zachitetezo

Observe the following safety precautions to prevent damage to the product or injury to personnel:

• Kuyika: Installation must be performed by qualified personnel in accordance with all local and national electrical and building codes.
• Magetsi: Use only the specified power supply (60 watts) for this device. Ensure the power source is stable and meets the camera's requirements.
• Chilengedwe: The camera is designed for outdoor use. However, avoid exposing it to extreme conditions beyond its specified operating range.
• Kuyeretsa: Chotsani mphamvu musanayeretse. Gwiritsani ntchito nsalu yofewa, youma. Osagwiritsa ntchito zotsukira zamadzimadzi kapena aerosol.
• Zosinthidwa: Do not attempt to modify or disassemble the camera. This may void the warranty and pose safety risks.

3. Zamkatimu Phukusi

Onetsetsani kuti zinthu zonse zilipo mu phukusi:

• Kamera ya AXIS Q6225-LE PTZ
• Kuyika Guide
• Kukhazikitsa Bulaketi ndi Zida
• Network Cable Connector
• Documentation and Software CD (if applicable)

Chithunzi 1: AXIS Q6225-LE PTZ Camera. This image displays the grey-colored PTZ camera unit, highlighting its robust housing and integrated lens system, designed for outdoor surveillance.

4. Kukhazikitsa ndi Kuyika

4.1 Kuyika Kamera

The AXIS Q6225-LE is designed for wall mount installation. Ensure the mounting surface is strong enough to support the camera's weight and withstand environmental conditions.

1. Sankhani malo oyenera oyikapo omwe amapereka gawo lomwe mukufuna view and is within reach of power and network connections.
2. Use the provided mounting template to mark drill holes on the wall.
3. Drill pilot holes and secure the mounting bracket using appropriate screws and anchors.
4. Attach the camera to the mounting bracket, ensuring it is firmly locked in place.

4.2 Mphamvu ndi Network Connection

Connect the camera to power and network as follows:

• Mphamvu: Connect the power cable to a 60-watt power source. Ensure the connection is secure and weatherproof.
• Network: Connect an Ethernet cable from your network switch or router to the camera's network port. The camera supports Wi-Fi for wireless communication. Refer to the network configuration section for wireless setup.

4.3 Kusintha Koyamba

After physical installation and connection, access the camera's web interface for initial configuration:

1. Tsegulani a web browser on a computer connected to the same network as the camera.
2. Enter the camera's IP address in the browser's address bar. If the IP address is unknown, use the AXIS IP Utility tool to discover it.
3. Follow the on-screen prompts to set up a new password for the administrator account.
4. Configure basic network settings, date/time, and video stream settings.

5. Kugwiritsa ntchito Kamera

5.1 Pan, Tilt, and Zoom (PTZ) Control

The AXIS Q6225-LE camera features full PTZ capabilities, allowing remote adjustment of its viewing angle and zoom level. Control is typically performed via the camera's web interface or compatible video management software (VMS).

• Mkate: Rotate the camera horizontally to cover a wider area.
• Kuchepetsa: Adjust the camera vertically to view objects at different heights.
• Kuwona Makulitsidwe: Use the optical zoom feature to magnify distant objects without loss of image quality.

5.2 Kuzindikira Kuyenda ndi Zidziwitso

The camera supports motion-only alerts. Configure motion detection zones and sensitivity settings in the web interface to trigger recordings or notifications when movement is detected.

5.3 Infrared (IR) Illumination

Equipped with infrared light sources, the camera provides clear video surveillance in low-light or complete darkness. IR illumination activates automatically or can be manually controlled.

6. Kusamalira

6.1 Kuyeretsa

Regular cleaning of the camera lens and housing is recommended to ensure optimal performance, especially in dusty or harsh environments.

• Gently wipe the lens with a soft, lint-free cloth. For stubborn dirt, use a lens cleaning solution specifically designed for optical surfaces.
• Clean the camera housing with a damp nsalu. Pewani zotsukira abrasive kapena solvents.

6.2 Zosintha za Firmware

Periodically check the Axis Communications website for firmware updates. Keeping the camera's firmware up-to-date ensures access to the latest features, security enhancements, and bug fixes.

7. Mavuto

This section addresses common issues you might encounter with your AXIS Q6225-LE camera.

8. Zofotokozera

9. Chitsimikizo ndi Thandizo

For warranty information and technical support, please refer to the official Axis Communications webkapena funsani wogulitsa wanu wovomerezeka. Sungani risiti yanu yogula ngati umboni wa kugula.

Zothandizira pa intaneti: www.axis.com