Mawu Oyamba
This manual provides detailed instructions for the setup, operation, and maintenance of your PDP Rematch Wired Gaming Controller, 1-Up Mushroom edition. This controller is officially licensed for Nintendo Switch, Nintendo Switch Lite, and Nintendo Switch - OLED Model. It also functions with Nintendo Switch 2, though the C Button is not available.
Chithunzi: Patsogolo view of the PDP Rematch Wired Gaming Controller, featuring a black body with green 1-Up Mushroom designs and a wired connection.
Zofunika Kwambiri
- Official Nintendo License: Ensures full compatibility and quality for Nintendo Switch, Switch Lite, and OLED models.
- Glow-in-the-Dark Design: The 1-Up Mushroom design glows in the dark after exposure to UV light, adding a unique visual element.
- Mappable Quick-Action Buttons: Two programmable back buttons allow for customized gameplay and faster reactions.
- Built-in Audio Controls: Features D-pad audio controls, a 3.5mm headset jack, and USB-chat compatibility for immersive sound and communication.
- Kulumikiza Kwawaya: Provides a reliable, lag-free gaming experience with a 10ft wired connection.
- Interchangeable Components: Faceplate, analog sticks, and D-pad can be swapped with other compatible Rematch controller parts for personalization.
Image: The PDP Rematch Wired Gaming Controller with its 1-Up Mushroom design glowing brightly in a dark environment.
Kukhazikitsa Guide
1. Kulumikiza Wowongolera
- Ensure your Nintendo Switch console is powered on and docked, or in handheld mode with a USB-C to USB-A adapter (not included) if connecting directly to the console.
- Locate an available USB port on your Nintendo Switch dock or console.
- Plug the USB-A connector of the PDP Rematch Wired Gaming Controller into the USB port.
- The controller is plug-and-play and should be recognized automatically by your Nintendo Switch.
Image: The PDP Rematch Wired Gaming Controller connected via its long USB cable, ready for use.
2. Kulumikizana kwa Audio
- To use a headset, plug your 3.5mm audio jack headset into the port located at the bottom of the controller.
- USB-chat functionality is supported for compatible games.
Chithunzi: Chapafupi view of the controller's bottom, highlighting the 3.5mm audio jack for headset connection.
3. Customizing the Controller (Interchangeable Parts)
- The faceplate, analog sticks, and D-pad are designed to be interchangeable.
- To remove the faceplate, gently pry it off from the edges.
- Analog sticks and D-pad can be pulled straight up to remove and replaced with other compatible parts (sold separately).
- Ensure parts are securely seated before use.
Image: An illustration demonstrating how various components of the controller, such as the faceplate, analog sticks, and D-pad, can be swapped.
Malangizo Ogwiritsira Ntchito
1. Basic Controls
The PDP Rematch Wired Gaming Controller features standard Nintendo Switch button layouts, including A, B, X, Y buttons, a D-pad, left and right analog sticks, L/R shoulder buttons, and ZL/ZR triggers. It also includes Home, Capture, Plus (+), and Minus (-) buttons.
Chithunzi: Pamwamba momveka bwino view of the controller, detailing the placement of all buttons and analog sticks.
2. Programming Back Buttons
- The two quick-action back buttons can be programmed to replicate any other button on the controller.
- Refer to the specific programming instructions provided in the controller's packaging or the official PDP support website for detailed steps on remapping.
Image: The rear of the controller, highlighting the two programmable quick-action back buttons.
3. Adjusting Audio
- Volume can be adjusted directly using the D-pad controls when a headset is connected.
- Press the D-pad Up/Down for volume adjustment.
Chithunzi: Mwatsatanetsatane view of the D-pad, illustrating its function for on-board audio adjustments.
Kusamalira
- Kuyeretsa: Use a soft, dry cloth to clean the controller. Avoid abrasive cleaners or solvents.
- Posungira: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures. Avoid wrapping the cable tightly around the controller to prevent damage.
- Kusamalira Chingwe: Do not pull on the cable to disconnect it from the console. Always grasp the USB connector firmly.
Kusaka zolakwika
- Wowongolera Sakuyankha:
- Ensure the USB cable is securely plugged into both the controller and the Nintendo Switch dock/console.
- Yesani kulumikiza chowongoleracho mu doko lina la USB.
- Yambitsaninso console yanu ya Nintendo Switch.
- No Audio Through Headset:
- Verify your headset is fully plugged into the 3.5mm jack on the controller.
- Check the volume settings on your Nintendo Switch and adjust using the D-pad controls on the controller.
- Ensure your headset is functioning correctly by testing it with another device.
- Back Buttons Not Programming:
- Follow the programming instructions carefully. Incorrect steps may prevent successful remapping.
- Ensure the controller firmware is up to date (check PDP's official support webtsamba).
Zofotokozera
| Nambala ya Model | 500-134-GID |
| Kulumikizana | Waya (USB-A) |
| Kutalika kwa Chingwe | 10 mapazi (pafupifupi mamita 3) |
| Kugwirizana | Nintendo Switch, Nintendo Switch Lite, Nintendo Switch - OLED Model, Nintendo Switch 2 (C Button not available) |
| Zomvera | 3.5mm Headset Jack, D-Pad Audio Controls, USB-Chat Support |
| Zapadera | Glow-in-the-Dark Design, Mappable Quick-Action Back Buttons, Interchangeable Faceplate/Analog Sticks/D-Pad |
| Miyeso Yazinthu | 2.56 x 6.3 x 5.31 mainchesi |
| Kulemera kwa chinthu | 6.08 pawo |
Official Product Video
Kanema: Wogwira ntchitoview of the PDP Rematch Controller series, showcasing its features and various designs.
Chitsimikizo ndi Thandizo
For warranty information, technical support, or further assistance with your PDP Rematch Wired Gaming Controller, please visit the official PDP webkapena funsani chithandizo cha makasitomala awo mwachindunji. Sungani umboni wanu wa kugula kuti mugwiritse ntchito ngati chitsimikizo.
Wopanga: PDP
Webtsamba: Pitani ku Sitolo ya PDP pa Amazon
