EMOS ZM4328

EMOS ZM4328 TORI LED Ceiling Light 15W with MW Sensor Instruction Manual

Chithunzi cha ZM4328

1. Mawu Oyamba

This manual provides detailed instructions for the installation, operation, and maintenance of your EMOS ZM4328 TORI LED Ceiling Light. This 15W LED light features a microwave motion sensor, providing 1500 lumens of 4000K neutral white light. It is designed for both indoor and outdoor use, including damp environments, thanks to its IP54 rating. Please read these instructions carefully before installation and retain them for future reference.

EMOS ZM4328 TORI LED Ceiling Light with 3 Years Warranty label

Figure 1: EMOS ZM4328 TORI LED Ceiling Light with 3 Years Warranty indication.

2. Malangizo a Chitetezo

  • Chitetezo cha Magetsi: Kuyika magetsi kuyenera kuchitidwa ndi katswiri wamagetsi wodziwa bwino ntchito motsatira malamulo a mawaya am'deralo. Onetsetsani kuti magetsi atsekedwa musanayike kapena kukonza.
  • Voltage: This product operates on a 230V AC power supply.
  • Mulingo wa IP54: The light is protected against dust ingress and splashing water from any direction. This makes it suitable for damp locations and outdoor sheltered areas, but not for submersion.
  • Gwero Lowala: The LED light source is integrated and not user-replaceable. Do not attempt to disassemble the light source.
  • Kutentha kwa Ntchito: Ensure the operating environment is within the specified temperature range to prevent damage.

3. Zamkatimu Phukusi

Onetsetsani kuti zigawo zonse zilipo musanayambe kukhazikitsa:

  • 1x EMOS ZM4328 TORI LED Ceiling Light with MW Sensor
  • Mounting accessories (screws, wall plugs, foam pads)
Mounting screws, wall plugs, and foam pads for EMOS ZM4328 TORI LED Ceiling Light

Figure 2: Included mounting accessories.

4. Kukhazikitsa ndi Kuyika

Tsatirani izi pakuyika koyenera:

  1. Chotsani Mphamvu: Before starting, ensure the main power supply to the installation area is switched off at the circuit breaker.
  2. Konzani Pamwamba Pamwamba: Choose a suitable location on a ceiling or wall. The light is suitable for indoor and outdoor use, including bathrooms, hallways, kitchens, balconies, and terraces.
  3. Gwirizanitsani Bracket Yokwera: Remove the mounting bracket from the back of the light fixture. Use the bracket as a template to mark drilling points on the surface. Drill holes and insert wall plugs if necessary. Secure the mounting bracket to the surface using the provided screws.
Kubwerera view of EMOS ZM4328 TORI LED Ceiling Light showing mounting bracket

Chithunzi 3: Kumbuyo view with mounting bracket.

  1. Wiring: Connect the main power supply cables to the terminal block inside the light fixture. Ensure correct polarity (Live, Neutral). The terminal block is designed for secure connections.
Close-up of the wiring terminal inside the EMOS ZM4328 TORI LED Ceiling Light

Figure 4: Wiring terminal connection points.

  1. Secure Light Fixture: Once wiring is complete, carefully attach the light fixture to the mounting bracket, ensuring it is securely fastened.
  2. Bwezerani Mphamvu: Yatsaninso magetsi akuluakulu.

5. Malangizo Ogwiritsira Ntchito

The EMOS ZM4328 TORI LED Ceiling Light features an integrated microwave motion sensor for automatic operation.

Ntchito ya Motion Sensor

  • The microwave motion detector reacts to movement within a range of up to 6 meters.
  • Unlike traditional PIR sensors, microwave sensors can detect movement even through thin doors, window glass, or thin walls, offering broader coverage.
  • The light will automatically turn on when motion is detected and turn off after a set delay if no further motion is detected.

Adjusting Sensor Settings (DIP Switches)

The light features DIP switches to adjust sensitivity, detection range, and hold time. These switches are typically located on the side of the fixture, accessible by opening a small cover.

Close-up of DIP switches for adjusting sensor settings on EMOS ZM4328 TORI LED Ceiling Light

Figure 5: DIP switches for sensor configuration.

Refer to the markings next to the DIP switches for specific settings related to:

  • Chidziwitso: Adjusts the maximum distance at which motion is detected.
  • Nthawi Yogwira: Sets the duration the light remains on after the last detected motion.
  • Daylight Sensor (Lux Level): Determines the ambient light level at which the sensor becomes active. For example, you can set it to only activate when it's dark.

Zindikirani: Always disconnect power before adjusting DIP switches to avoid electrical hazards.

6. Kusamalira

  • Kuyeretsa: To clean the light fixture, ensure the power is off. Use a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or diffuser.
  • Chitetezo cha tizilombo: The high IP54 protection class prevents mosquitoes or flies from entering the lamp, reducing the need for internal cleaning.
  • Palibe Magawo Ogwiritsa Ntchito: The LED light source is integrated and not designed for user replacement. Do not attempt to open the sealed unit beyond accessing the wiring and DIP switches.

7. Mavuto

If you encounter issues with your EMOS ZM4328 TORI LED Ceiling Light, refer to the following common problems and solutions:

VutoChifukwa ChothekaYankho
Kuwala sikuyatsa.Palibe magetsi.
Kulumikizana kolakwika.
Daylight sensor setting too high.
Yang'anani chophwanyira dera ndi kulumikizidwa kwamagetsi.
Verify wiring connections (Live, Neutral).
Adjust the daylight sensor (Lux) setting on the DIP switches.
Kuwala kumakhalabe kosalekeza.Kuyenda kosalekeza kwapezeka.
Hold time setting too long.
Sensor ikugwira ntchito bwino.
Ensure no constant movement in the detection area.
Adjust the hold time setting on the DIP switches to a shorter duration.
If problem persists, contact support.
Light turns on/off too frequently.Sensitivity too high.
Detection range too wide.
Reduce the sensitivity and/or detection range using the DIP switches.
Sensor does not detect motion.Sensitivity too low.
Detection range too narrow.
Obstruction blocking sensor.
Daylight sensor setting too low (light always on).
Increase sensitivity and/or detection range via DIP switches.
Ensure no large metal objects or thick walls are directly in front of the sensor.
Adjust the daylight sensor (Lux) setting.

8. Zofotokozera

MtunduMtengo wa EMOS
Nambala ya ModelZM4328
Makulidwe (Diameter x Kutalika)220 mm x 53 mm (approx. 8.66 in x 2.09 in)
Kulemera622 magalamu (pafupifupi 1.37 lbs)
Mphamvu15 Watts
Luminous Flux1500 lumens
Kutentha kwamtundu4000 Kelvin (Woyera Wosalowerera)
Colour Rendering Index (CRI)80
Incandescent Equivalence100 Watts
Voltage230 Volts AC
Mtengo wa IPIP54
ZakuthupiAcrylonitrile Butadiene Styrene (ABS), Plastic diffuser
ZapaderaMicrowave Motion Detector, Energy-saving, Waterproof
Kalasi Yogwiritsa Ntchito MphamvuE (on new scale from 1.9.2021)
Diagram showing dimensions of EMOS ZM4328 TORI LED Ceiling Light: 220mm diameter, 53mm height

Chithunzi 6: Miyeso yazinthu.

Energy efficiency label showing class E for the EMOS ZM4328 TORI LED Ceiling Light

Figure 7: Energy Efficiency Label (Class E).

9. Chitsimikizo ndi Thandizo

Chitsimikizo

This EMOS ZM4328 TORI LED Ceiling Light comes with a 3-zaka chitsimikizo kuyambira tsiku logula. Chonde sungani umboni wanu wogula kuti mugwiritse ntchito chitsimikizo. Chitsimikizocho chimaphimba zolakwika pa zipangizo ndi kapangidwe kake pogwiritsa ntchito mwachizolowezi.

Thandizo la Makasitomala

For technical assistance, warranty claims, or any questions regarding your product, please contact your retailer or the EMOS customer service department. Contact information can typically be found on the product packaging or the official EMOS webmalo.

Zolemba Zofananira - ZM4328

Preview EMOS ZM3131 ZM3231 LED Wall Luminaire with PIR Sensor - Specifications and Manual
Detailed information and user manual for the EMOS ZM3131 and ZM3231 LED wall luminaires featuring a PIR sensor. Includes specifications, mounting instructions, and safety warnings.
Preview EMOS G1125 PIR Motion Sensor: Specifications and Installation Guide
Detailed specifications, features, and installation guide for the EMOS G1125 PIR motion sensor. Learn about its detection range, sensitivity, power, and more.
Preview EMOS LED Panels: Recessed & Built-in Lighting - Specifications, Installation, and Warranty
Comprehensive guide to EMOS LED panels, including recessed and built-in models (ZD11xx and ZD21xx series). Features detailed specifications, installation instructions, safety warnings, energy efficiency information, and warranty details for indoor lighting applications.
Preview EMOS GS11111 PIR Motion Sensor - Indoor Automatic Lighting Control
Detailed information on the EMOS GS11111 PIR motion sensor, including technical specifications, installation guide, and safety instructions for automatic indoor lighting control.
Preview Ma LED a EMOS ZS2313W, ZS2333W, ZS2323W okhala ndi PIR Sensor: Mafotokozedwe ndi Malangizo Oyikira
Comprehensive technical specifications, installation instructions, maintenance guidelines, and safety warnings for EMOS ZS2313W, ZS2333W, and ZS2323W LED floodlights featuring integrated PIR motion sensors. Includes details on PIR sensor parameters, mounting, wiring, and product compliance.
Preview P56400S Carbon Monoxide Detector Buku Logwiritsa | Mtengo wa EMOS
Buku lathunthu la EMOS P56400S Carbon Monoxide (CO) Detector. Phunzirani za malangizo achitetezo, mawonekedwe aukadaulo, kukhazikitsa, kugwiritsa ntchito, kuphatikiza pulogalamu yam'manja ndi EMOS GoSmart, ndikuthetsa mavuto.