Legrand LEG67766

Legrand Micromodule for Connected VMC with Netatmo

Chitsanzo: LEG67766

1. Mawu Oyamba

This instruction manual provides essential information for the safe installation, operation, and maintenance of your Legrand Micromodule for Connected VMC (Ventilation Mécanique Contrôlée) with Netatmo. This micromodule is designed to enable smart control of a single-flow, 2-speed VMC system, with a maximum power rating of 250W. It integrates seamlessly with the Home+Control application and wireless control devices, offering enhanced convenience and energy management for your ventilation system.

Chonde werengani bukuli bwino musanayike ndikugwiritsa ntchito, ndipo lisungeni kuti mudzagwiritse ntchito mtsogolo.

2. Zambiri Zachitetezo

CHENJEZO: Kuopsa kwa Kugwedezeka kwa Magetsi

  • Installation must be performed by a qualified electrician in accordance with all national and local electrical codes and regulations.
  • Always disconnect power at the main circuit breaker before installing, servicing, or removing the device.
  • Do not install or use this device if it appears damaged.
  • Onetsetsani kuti zolumikizira zonse ndi zotetezeka komanso zotetezedwa bwino.
  • This device is intended for indoor use only. Do not expose to moisture or extreme temperatures.

3. Zamkatimu Phukusi

Onetsetsani kuti phukusi lanu lili ndi zinthu izi:

  • Legrand Micromodule for Connected VMC
  • White cover (if applicable)
  • Buku Lachidziwitso (chikalata ichi)

4. Kukhazikitsa ndi Kuyika

The Legrand Micromodule is designed to be installed as close as possible to the VMC unit it controls. Professional installation is highly recommended due to the electrical nature of the device.

4.1 Kuyikiratu

  1. Chotsani Mphamvu: Turn off the main power supply to the VMC circuit at your electrical panel. Verify that the power is off using a voltagndi tester.
  2. Dziwani Mawaya: Identify the power supply wires and the control wires for your 2-speed VMC system. Consult your VMC's manual if necessary.

4.2 Wiring the Micromodule

Follow the wiring diagram provided with the product packaging. Typically, the micromodule will connect to the main power supply and then to the VMC's speed control inputs (e.g., low speed and high speed). Ensure proper grounding.

Legrand Micromodule for Connected VMC with Netatmo, showing its compact design and wiring terminals.

Image 1: Legrand Micromodule for Connected VMC. This image displays the compact design of the micromodule, highlighting its size and the terminals for electrical connections. It is typically installed within an electrical box or near the VMC unit.

4.3 Pairing with Home+Control App

  1. Bwezerani Mphamvu: Once wiring is complete and secure, restore power to the circuit.
  2. Tsitsani App: Download the Legrand Home+Control application from your device's app store.
  3. Pangani akaunti: Tsegulani pulogalamuyi ndikupanga akaunti kapena lowani.
  4. Onjezani Chipangizo: Follow the in-app instructions to add a new device. The app will guide you through the pairing process, which typically involves putting the micromodule into pairing mode (refer to the specific instructions in the app or product leaflet for exact steps, often involving a short press on a button on the module or a specific power cycle sequence).
  5. Konzani: Once paired, you can configure the VMC speeds and integrate with other Netatmo-compatible devices.

5. Operating the Micromodule

The Legrand Micromodule allows for smart control of your 2-speed VMC system.

5.1 Via Home+Control App

  • Open the Home+Control app on your smartphone or tablet.
  • Navigate to the VMC device.
  • You will typically find options to switch between the two VMC speeds (e.g., 'Low' and 'High' or 'Normal' and 'Boost').
  • The app may also allow for scheduling, automation, and integration with other smart home scenarios.

5.2 Via Wireless Control (Optional)

If you have paired the micromodule with a compatible Legrand wireless control switch, you can operate the VMC speeds directly from the switch. Refer to the instructions provided with your wireless control for specific operation details.

6. Kusamalira

The Legrand Micromodule is designed for long-term, maintenance-free operation. However, consider the following:

  • Kuyeretsa: If the exterior of the module or its cover requires cleaning, ensure power is disconnected. Use a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
  • Zosintha za Firmware: Periodically check the Home+Control app for available firmware updates for your micromodule. Updates can improve performance and add new features.
  • VMC Maintenance: Regular maintenance of your VMC system (e.g., filter cleaning/replacement) should be performed according to the VMC manufacturer's instructions.

7. Mavuto

If you encounter issues with your Legrand Micromodule, try the following steps:

  • Palibe Mphamvu/Palibe Yankho:
    • Check the circuit breaker to ensure power is supplied to the VMC circuit.
    • Onetsetsani kuti mawaya onse olumikizidwa ndi otetezeka (only if you are a qualified electrician).
  • Cannot Pair with App:
    • Ensure your smartphone is connected to the same Wi-Fi network as your Netatmo gateway (if applicable).
    • Restart the Home+Control app.
    • Try resetting the micromodule to factory settings (refer to the app or product leaflet for specific instructions).
    • Ensure the micromodule is within range of your Netatmo gateway or Wi-Fi network.
  • VMC Not Changing Speeds:
    • Verify the VMC itself is functioning correctly when directly controlled (if possible).
    • Check the wiring between the micromodule and the VMC's speed inputs.
    • Ensure the micromodule is correctly configured in the Home+Control app.

If problems persist, contact Legrand customer support or consult a qualified electrician.

8. Zofotokozera

WopangaLegrand
Nambala ya ModelLEG67766
Gawo NambalaLEG67766
Miyeso Yazinthu2.72 x 3.7 x 3.7 mainchesi
Kulemera kwa chinthu2.65 pawo
Max Power Rating250W
VMC TypeSingle flow, 2-speed
KugwirizanaHome+Control app, Netatmo ecosystem
Mabatire AmafunikaAyi

9. Chitsimikizo ndi Thandizo

Legrand products are designed and manufactured to the highest quality standards. For information regarding the warranty period and terms for your Micromodule, please refer to the warranty card included with your product or visit the official Legrand webmalo.

For technical support, troubleshooting assistance, or to report a defective product, please contact Legrand customer service through their official webtsamba kapena mauthenga omwe aperekedwa muzolemba zamalonda anu.

Legrand Official Webtsamba: www.legrand.com

Zolemba Zofananira - LEG67766

Preview Buku Lothandizira Kukhazikitsa la Legrand Connected Lighting Micromodule 5742 43
Buku lotsogolera ndi kugwiritsa ntchito Legrand Arteor yokhala ndi micromodule yolumikizidwa ya Netatmo (chitsanzo 5742 43), kuphatikiza tsatanetsatane waukadaulo, mawaya, ndi malangizo achitetezo.
Preview Arteor yokhala ndi Netatmo: Smart Home System Product Guide | Legrand
Onani Arteor ndi Netatmo smart home system yolembedwa ndi Legrand. Dziwani zowunikira zolumikizidwa, zotchingira, zotsekera, ndi njira zowongolera mawu pamoyo wamakono, wopangidwa kuti ukhale wosavuta kugwiritsa ntchito komanso kukongola kokongola.
Preview Guide d'installation et d'utilisation du télérupteur connecté Legrand 412170
Tsatanetsatane wa kuyika ndi kugwiritsa ntchito Legrand 412170, kuphatikiza lecâblage, kasinthidwe, njira zamafotokozedwe ndi ma consignes de sécurité.
Preview Buku Lothandizira Kukhazikitsa Legrand 4 121 73 Lolumikizidwa Louma
Kukhazikitsa kwathunthu ndi chitsogozo cha ogwiritsa ntchito cha gawo la Legrand 4 121 73 Connected Dry Contact, lomwe limafotokoza bwino mawonekedwe ake, zofunikira pa mawaya, njira zodzitetezera, komanso kuphatikiza ndi Legrand Home + Control smart home ecosystem.
Preview Legrand 2 Gang Connected Switch with Neutral CB0416 - CN0416 - CT0416 Installation Guide
Installation instructions and technical specifications for the Legrand 2 Gang Connected Switch with Neutral (CB0416, CN0416, CT0416), a smart home accessory compatible with Netatmo.
Preview Kukhazikitsa ndi Buku Lothandizira la Legrand Connected Contactor
Buku lothandizira kukhazikitsa ndi kugwiritsa ntchito Legrand Connected Contactor (4 121 71 - 1 991 22) yokhala ndi Netatmo, lomwe limakhudza mawaya, kukhazikitsa, ndi kugwiritsa ntchito.