hygger Advanced Remote Control Aquarium Light HG016 Instruction Manual

Zathaview

The hygger Advanced Remote Control Aquarium Light HG016 is a customizable full spectrum LED lighting solution designed for freshwater planted tanks. It features various modes including DIY, Default, and Weather, all controllable via a remote with an LCD display. This light is engineered to promote plant growth and enhance the visual appeal of your aquarium.

Zamkatimu Phukusi

Chonde onetsetsani kuti zipangizo zonse zilipo musanapitirize kukhazikitsa.

• hygger Advanced Remote Control Aquarium Light (HG016)
• Remote Control with LCD Display
• Adapter yamagetsi
• Extendable Mounting Brackets (2 pieces)
• Buku Logwiritsa Ntchito

Image: The hygger aquarium light, remote control, power adapter, and mounting brackets laid out after unboxing.

Kukhazikitsa ndi Kuyika

1. Gwirizanitsani Mabulaketi Okwera: Slide one metal bracket onto each end of the light fixture. The brackets are designed to extend and fit tanks from 24 to 30 inches in length.
   

   Image: Close-up of a hand sliding an extendable metal bracket onto the end of the hygger LED light fixture.

2. Ikani Kuwala: Place the assembled light fixture securely on top of your aquarium. Ensure the brackets are firmly seated on the tank edges.
   

   Image: The hygger aquarium light is positioned on top of a fish tank, with its brackets resting on the tank's edges.
3. Lumikizani Mphamvu: Plug the power adapter into the light fixture, then plug the adapter into a suitable power outlet.

Malangizo Ogwiritsira Ntchito

The hygger HG016 aquarium light offers multiple operating modes and customizable settings via its remote control.

Kutalikira Kwambiriview

Image: A detailed image of the remote control, highlighting its LCD screen and various buttons for mode selection, color, brightness, and timing.

Kukhazikitsa Nthawi Yatsiku

To set the current time on the remote, long-press the "SET" button until the hour digit flashes. Use the UP/DOWN buttons to adjust the hour, then press "SET" again to move to minutes. Adjust minutes with UP/DOWN and press "SET" to save.

Kusankha Mode

1. Default Mode (24/7 Cycle)

This mode simulates a natural 24-hour day cycle, providing a gradual sunrise, bright daylight, gentle sunset, and 4 hours of moonlight before turning off. To activate, press the "24/7" button on the remote.

2. Day & Moon Light Mode

This mode offers full spectrum lighting during the day and blue light at night. You can customize your own color blends.

Image: Diagram illustrating the initial program for Day-Light Mode and Moon-Light Mode, showing light intensity over time.

3. DIY Mode

Divide the 24 hours into 8 phases. You can customize the time, color, and brightness for each phase (L1-L8).

Image: Diagram illustrating the 8 phases of the DIY mode for a 24-hour lighting cycle, including sunrise, daylight, sunset, moonlight, and off periods.

4. Weather Mode

Choose from preset weather effects like sunrise, sunset, cloudy, and lightning to add dynamic visual effects to your tank.

Kusintha kwa Kuwala

Use the UP/DOWN arrow buttons on the remote to adjust the brightness level from 10% to 100% (10 levels).

Zosankha zamtundu

Press the power/mode button to cycle through 7 spectrum colors (red, green, blue, purple, orange, cyan, yellow) and a full spectrum white light.

Kusamalira

The light features a high-quality aluminum shell for improved heat dissipation and a high light transmission PC lamp cover to prevent water splashing.

• Kuyeretsa: The aluminum housing is smooth and easy to wipe clean with a paper towel to remove dirt or gunk.
• Kukanika kwa Madzi: The light is IP68 waterproof, meaning it can withstand splashes and temporary submersion. However, avoid prolonged submersion of the remote control as it is not waterproof.

Kusaka zolakwika

• Mphamvu Outage: If power goes out, the light has a memory function that will restore your last settings once power is re-established. No need to reset.
• Mavuto akutali: Ensure the cell battery in the remote is correctly installed. The remote operates within a range of 32 feet.
• Light Not Bright Enough: Adjust the brightness using the UP/DOWN arrow buttons on the remote.
• Kukula kwa Algae: Excessive light can promote algae growth. Utilize the timer function to set appropriate lighting durations (6, 10, or 12 hours) or adjust brightness levels.

Zofotokozera

Chitsimikizo ndi Thandizo

This hygger product comes with a one-year warranty. For any issues or assistance, please contact hygger customer support.

• Nthawi Yotsimikizira: Chaka chimodzi kuchokera tsiku logula.
• Lumikizanani ndi Thandizo: Refer to the user manual for specific contact details or visit the official hygger webmalo.

Visit the hygger Store on Amazon