AeroCool HEXFORMBKV2 Micro ATX PC Case Instruction Manual

1. Zamalonda Zathaview

The AeroCool HEXFORMBKV2 is a high-performance Micro ATX PC case designed for optimal ventilation and a modern aesthetic. It features a tempered glass side panel to showcase your internal components and a stylish front panel that highlights the included FRGB fans. This mini-tower case supports efficient air and liquid cooling solutions.

Zofunika Kwambiri:

• High-Performance Mini-Tower: Front panel designed for effective cooling, showcasing three fixed RGB fans.
• Expansive Cooling Support: Includes 3 FRGB fans (2 front, 1 rear) and supports liquid cooling at the front and rear.
• Micro ATX Compatibility: Supports Micro-ATX and Mini-ITX motherboards, CPU coolers up to 159 mm, and high-performance graphics cards up to 296 mm (without front radiator).
• Multimedia Access: Top panel features 1x USB 3.0 port, 2x USB 2.0 ports, microphone and HD audio jacks, and Reset/Power buttons.

2. Zofotokozera

3. Kukonzekera Guide

Follow these steps to properly install your components into the AeroCool HEXFORMBKV2 PC case.

3.1 Kutulutsa

1. Carefully remove the PC case from its packaging.
2. Remove any protective films or internal packaging materials.
3. Ikani mlanduwo pamalo okhazikika, ophwanyika.

3.2 Kuyika kwa ma boardboard

1. Remove the tempered glass side panel by unscrewing the thumb screws.
2. Install the I/O shield (if not pre-installed on your motherboard) into the rear opening of the case.
3. Align your Micro ATX or Mini-ITX motherboard with the standoffs inside the case.
4. Mangani bolodi la amayi pogwiritsa ntchito zomangira zomwe zaperekedwa.

3.3 Kukhazikitsa Mphamvu Yamagetsi

1. Locate the power supply mounting area at the bottom rear of the case.
2. Slide your power supply unit (PSU) into the designated bay.
3. Mangani PSU ndi zomangira kuchokera kumbuyo kwa chikwamacho.

3.4 Kukhazikitsa Ma Drive Osungirako

1. Identify the 3.5-inch drive bays within the case.
2. Mount your hard drives or SSDs into the appropriate bays and secure them with screws.

3.5 Kukhazikitsa Khadi Lokulitsa (GPU)

1. Chotsani zophimba zofunikira za malo owonjezera kumbuyo kwa chikwamacho.
2. Ikani khadi lanu la zithunzi kapena makadi ena owonjezera mu malo osungira ma PCIe pa bolodi lanu la amayi.
3. Ensure the card is seated correctly and secure it with a screw. Note the maximum GPU length of 296 mm (without front radiator).

3.6 Dongosolo Lozizira

The case comes with three pre-installed 120mm FRGB fans (two at the front, one at the rear). Additional fans or liquid cooling radiators can be installed as needed. Ensure proper airflow direction for optimal cooling.

3.7 Kasamalidwe ka Chingwe

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to organize cables. This improves airflow and aesthetics.

4. Malangizo Ogwiritsira Ntchito

4.1 Kuyatsa/Kuzimitsa

• To power on your PC, press the Mphamvu button located on the top panel.
• To power off, either shut down through your operating system or press and hold the Mphamvu batani kwa masekondi angapo.

4.2 Front Panel I/O Ports

The top panel provides convenient access to various ports:

• Doko la USB 3.0 (x1): Kutumiza deta mwachangu kwambiri.
• Madoko a USB 2.0 (x2): Zolumikizira zolumikizira.
• Maikolofoni Jack: Kuti mulowetse mawu.
• HD Audio Jack: For audio output (headphones/speakers).
• Bwezerani Batani: To restart the system. Note: This button may also cycle through FRGB lighting effects if connected to a compatible controller.

4.3 FRGB Fan Control

The pre-installed FRGB fans offer fixed RGB lighting. If your motherboard supports RGB control, you may be able to synchronize or change lighting effects via motherboard software. Otherwise, the Reset button might cycle through pre-set effects if wired accordingly.

5. Kusamalira

Kusamalira pafupipafupi kumathandizira kuti pakhale magwiridwe antchito komanso moyo wautali wa zida zanu za PC.

5.1 Kuyeretsa Fumbi la Fumbi

• The HEXFORMBKV2 features a mesh front panel and a top panel with a magnetic dust filter.
• Periodically remove and clean these filters to prevent dust buildup, which can hinder airflow and cooling efficiency.
• Use compressed air or a soft brush to remove dust.

5.2 Kuyeretsa Kwanthawi Zonse

• Pukutani kunja kwa mlanduwo ndi chofewa, damp nsalu. Pewani zotsukira abrasive.
• For the tempered glass panel, use a glass cleaner and a microfiber cloth to prevent scratches.

6. Mavuto

If you encounter issues with your PC case, consider the following common troubleshooting steps:

• Palibe Mphamvu: Ensure all power cables (PSU to wall, PSU to motherboard, PSU to components) are securely connected. Check the power switch on the PSU.
• Mafani Osazungulira/RGB Sakugwira Ntchito: Verify that the fan power cables and RGB cables are correctly connected to the motherboard or a fan/RGB controller. Consult your motherboard manual for proper header connections.
• Kutentha kwambiri: Ensure all fans are spinning correctly and are oriented to provide adequate airflow (intake/exhaust). Clean dust filters regularly. Check CPU cooler and GPU temperatures using monitoring software.
• Front Panel Ports Not Working: Check that the front panel I/O cables (USB, Audio, Power/Reset) are correctly connected to the corresponding headers on your motherboard.

For more complex issues, consult the manuals for your individual PC components (motherboard, GPU, PSU) or seek professional assistance.

7. Chitsimikizo ndi Thandizo

7.1 Chidziwitso cha Chitsimikizo

The AeroCool HEXFORMBKV2 PC case comes with a 2-zaka chitsimikizo for parts. Please retain your proof of purchase for warranty claims.

7.2 Thandizo laukadaulo

For technical assistance, product inquiries, or warranty claims, please visit the official AeroCool website or contact their customer support. You can typically find contact information on the manufacturer's webtsamba kapena muzopaka zamalonda.

• AeroCool Yovomerezeka Webtsamba: www.aerocool.io
• Imelo Yothandizira Makasitomala: support@aerocool.io (Kulample, please verify on official webtsamba)