Mawu Oyamba
The Dogtra HANDSFREE Square is an expandable remote dog training device designed for discreet control and flexible training scenarios. This device allows trainers to operate remotely without carrying a traditional transmitter, offering freedom to multitask during training sessions.
It is compatible with HANDSFREE PLUS and previous HANDSFREE models, allowing for pairing with up to 14 HANDSFREE Squares to a single transmitter for enhanced training versatility.
Image: The Dogtra HANDSFREE Square device, a compact remote controller attached to a wrist strap, shown from an angled perspective.
Khazikitsa
1. Kuyika kwa Battery
The HANDSFREE Square requires one CR2032 lithium coin battery (included). To install or replace the battery:
- Pezani batire pa chipangizo.
- Open the compartment and insert the CR2032 battery with the positive (+) side facing up.
- Tsekani motetezeka batire.
The battery is designed for extended life, lasting 7 to 10 years with normal usage (100 presses per day, 12 seconds each). Replace the battery when the LED indicator no longer blinks.
2. Pairing with a Transmitter
The HANDSFREE Square must be paired with a compatible Dogtra HANDSFREE Series transmitter (HANDSFREE PLUS or previous HANDSFREE models) to function.
- For HANDSFREE PLUS models: Up to 14 HANDSFREE Squares can be paired to one transmitter, allowing for duplicate functions across multiple Squares.
- For previous HANDSFREE versions: Only one HANDSFREE Square can be programmed to the transmitter.
Refer to your specific Dogtra HANDSFREE Series transmitter manual for detailed pairing instructions, as the process may vary slightly between models.
Image: A diagram illustrating the expandability of the HANDSFREE Square, showing one square connected wirelessly to a transmitter, with an icon indicating that up to 14 squares can be paired.
Kugwiritsa Ntchito Chipangizo
Wearing the HANDSFREE Square
The HANDSFREE Square is designed for discreet and convenient control. It features a flexible strap and intuitive buckle, allowing it to be fastened to your wrist, palm, or fingers. This ergonomic design enables you to operate the device remotely while keeping your hands free for other tasks during training.
Image: A person wearing the HANDSFREE Square on their hand, discreetly controlling the device while interacting with a dog, demonstrating hands-free operation.
Functions and Range
Once paired, the HANDSFREE Square provides quick access to the programmed functions of your main transmitter, typically including Nick, Constant, or Pager functions. The device needs to be used within 33 feet of the main transmitter to maintain connection and functionality.
This setup allows you to control your dog's training collar from a distance of up to 3/4-mile (depending on the main transmitter's range), all from your fingertips, ensuring immediate and discreet control.
Image: A person walking a dog outdoors, with the HANDSFREE Square visible on their hand, emphasizing immediate and discreet control during training.
Kusamalira
Kusintha kwa Battery
As noted in the setup section, the CR2032 lithium coin battery has an extended life. When the LED indicator on the HANDSFREE Square no longer blinks, it is time to replace the battery. Follow the battery installation steps outlined in the Setup section.
Kuyeretsa ndi Kusamalira
To ensure the longevity and proper function of your HANDSFREE Square, keep it clean and free from dirt and debris. Wipe the device with a soft, damp cloth as needed. Avoid using harsh chemicals or abrasive materials.
Important Note: The HANDSFREE Square is not waterproof. Avoid submerging it in water or exposing it to heavy rain.
Kusaka zolakwika
This section addresses common issues you might encounter with your Dogtra HANDSFREE Square.
- Chipangizo sichikuyankha:
- Check the battery: Ensure the CR2032 battery is correctly installed and has sufficient charge. Replace if the LED is not blinking.
- Check pairing: Verify that the HANDSFREE Square is properly paired with your Dogtra HANDSFREE Series transmitter. Refer to your transmitter's manual for pairing instructions.
- Check range: Ensure the HANDSFREE Square is within 33 feet of the main transmitter.
- Kugwira ntchito mosagwirizana:
- Environmental interference: Strong radio signals or large metal structures can interfere with the device's operation. Try moving to a different location.
- Battery level: A low battery can cause inconsistent performance. Replace the battery.
If you continue to experience issues, please contact Dogtra customer support for assistance.
Zofotokozera
| Dzina lachitsanzo | SQUARE YAM'manja |
| Nambala Yachitsanzo Yachinthu | 644622020840 |
| Mtundu | Agalu |
| Kulemera kwa chinthu | 0.317 pawo |
| Makulidwe azinthu (LxWxH) | 2.25 x 0.75 x 0.04 mainchesi |
| Mabatire | 1 CR2032 batire (yophatikizidwa) |
| Zakuthupi | Pulasitiki |
| Mtundu | Wakuda |
| Kugwirizana | Dogtra HANDSFREE PLUS and previous HANDSFREE models |
| Max Paired Units | Up to 14 HANDSFREE Squares (with HANDSFREE PLUS) |
| Range to Transmitter | Within 33 feet |
| Kukaniza Madzi | Osati madzi |
Chidziwitso cha Chitsimikizo
The Dogtra HANDSFREE Square is covered by a 1 Chaka Wopanga chitsimikizo. This warranty is handled by Dogtra USA. Please retain your proof of purchase for any warranty claims.
Image: A graphic displaying the Dogtra logo and a "Warranty Notification" stating that the product is covered by Dogtra USA's 1-year manufacturer warranty.
Thandizo la Makasitomala
For further assistance, technical support, or warranty inquiries, please visit the official Dogtra webtsamba kapena funsani dipatimenti yawo yothandizira makasitomala.
Mukhozanso kupita ku Dogtra Brand Store on Amazon kuti mudziwe zambiri zamalonda ndi zothandizira.
