lightmaXX Vega BAT LED 4x12 W RGBAWUV Instruction Manual

1. Mawu Oyamba

1.1 Zogulitsa Zathaview

The lightmaXX Vega BAT LED is a versatile, battery-powered uplight designed for various lighting applications. It features four 12-watt RGBAWUV (Red, Green, Blue, Amber, White, UV) LEDs, providing a broad spectrum of color mixing capabilities. With an 80W power output, this fixture supports both 6 and 10 DMX channels for precise control in professional setups. Operating modes include automatic programs, sound-activated effects, master/slave configurations, and convenient control via an infrared (IR) remote.

1.2 Zambiri Zachitetezo

• Nthawi zonse gwirizanitsani chipangizochi ndi potulukira magetsi.
• Musatsegule chitsekocho; mulibe zida zogwiritsidwa ntchito mkati. Tumizani chithandizo chonse kwa ogwira ntchito oyenerera.
• Pewani kuyang'ana maso mwachindunji ku gwero la kuwala.
• Onetsetsani kuti pali mpweya wokwanira wozungulira chipindacho kuti musatenthedwe.
• Sungani chipangizocho kutali ndi chinyezi ndi kutentha kwambiri.
• Chida ichi chiyenera kuchotsedwa.

2. Zamkatimu Phukusi

Please check that all items listed below are present and in good condition upon unpacking:

• lightmaXX Vega BAT LED 4x12 W RGBAWUV unit
• IR Remote Control
• Chingwe Chamagetsi
• Buku Lachidziwitso (chikalata ichi)

Chithunzi 2.1: Power cable with a standard European plug and a blue locking connector for the light fixture.

Chithunzi 2.2: Infrared remote control with various color, mode, and numerical buttons for operating the LED spot.

3. Kukhazikitsa

3.1 Kulipira Koyamba

Before first use, fully charge the internal battery. Connect the provided power cable to the unit's power input and then to a suitable 240V AC power outlet. The charging indicator (if available on the display) will show the charging status. A full charge typically takes several hours.

3.2 Kuyika

Position the Vega BAT LED on a stable, flat surface or mount it using appropriate clamps and safety cables (not included) to a truss or stand. Ensure the unit is placed in a location with good air circulation and away from direct heat sources or flammable materials.

3.3 Zogwirizana

For standalone operation, simply power on the unit after charging. For DMX control, connect a DMX cable from your DMX controller to the DMX IN port of the Vega BAT LED. If linking multiple units, connect the DMX OUT of the first unit to the DMX IN of the next, and so on.

Chithunzi 3.1: Pansi view of the light fixture showing the power input, DMX ports, and regulatory labels.

4. Ntchito

4.1 Control Panel

The unit features an onboard control panel with a display and four buttons: MENU, DOWN, UP, and ENTER. This panel allows for direct access to settings and operating modes.

Chithunzi 4.1: Patsogolo view of the control panel with display and navigation buttons.

Chithunzi 4.2: Pamwamba view of the control panel, showing the display and button layout.

• MENU: Imayenda kudzera mu menyu yayikulu.
• PANSI: Imachepetsa mtengo kapena imadutsa m'masankhidwe a menyu.
• PA: Imawonjezera mitengo kapena kusuntha kudzera muzosankha za menyu.
• Lowani: Imatsimikizira zosankha kapena kulowa mu menyu ang'onoang'ono.

4.2 IR Remote Control

The included IR remote control provides convenient wireless operation for various functions, including color selection, mode changes, and power on/off.

• WOYATSA/WOZIMA: Imayatsa kapena kuyimitsa chipangizocho.
• R, G, B, A, W, UV: Direct access to Red, Green, Blue, Amber, White, and Ultraviolet colors.
• 0-9: Numerical buttons for selecting specific programs or DMX addresses.
• ZOTHANDIZA: Activates automatic program mode.
• LIMBANI: Activates strobe effect.
• ZITHA: Imayatsa mtundu kuzimiririka mode.
• MPUMO: Amayatsa-mawu amalowedwe.

4.3 Njira Zogwiritsira Ntchito

The Vega BAT LED offers several operating modes:

• Makina Odzipangira okha: The unit cycles through pre-programmed color changes and effects. Selectable via the control panel or IR remote.
• Mawonekedwe Oyenera: The light reacts to ambient sound, creating dynamic effects. Sensitivity can often be adjusted via the control panel.
• Mphunzitsi / Akapolo Mode: Link multiple units where one acts as the master, controlling all connected slave units. Connect DMX cables in a daisy chain.
• Njira ya DMX: For professional control using a DMX controller. The unit supports 6 or 10 DMX channels, allowing for granular control over color mixing, dimming, strobe, and internal programs. Set the DMX address via the control panel.

Chithunzi 4.3: The light fixture emitting ultraviolet (UV) light.

Chithunzi 4.4: The light fixture emitting amber-colored light.

5. Kusamalira

5.1 Kuyeretsa

Regularly clean the lens and exterior housing with a soft, lint-free cloth. For stubborn dirt, a slightly damp cloth can be used. Do not use abrasive cleaners or solvents, as they may damage the finish or optical components.

5.2 Kusamalira Battery

To prolong battery life, avoid fully discharging the unit frequently. If storing the unit for an extended period, ensure the battery is charged to approximately 50-70% and recharge it every 3-6 months. Store in a cool, dry place.

5.3 Kusungirako

When not in use, store the Vega BAT LED in its original packaging or a suitable protective case to prevent damage from dust, moisture, and impacts.

6. Mavuto

• Chigawo sichimayatsa: Ensure the battery is charged or the power cable is securely connected to a live outlet. Check the power switch.
• No light output: Verify the unit is powered on and not in standby mode. Check selected operating mode and brightness settings.
• IR remote not working: Ensure there are no obstructions between the remote and the unit's IR receiver. Check the remote's battery.
• DMX control issues: Verify DMX cable connections, DMX address settings on the unit, and DMX channel mode. Ensure your DMX controller is functioning correctly.
• Moyo wa batri ndi waufupi: The battery may require a full charge cycle. Over time, battery capacity can decrease; consider battery replacement if performance significantly degrades.

7. Zofotokozera

8. Chitsimikizo ndi Thandizo

For warranty information and technical support, please refer to the documentation provided at the time of purchase or contact your authorized lightmaXX dealer. Keep your proof of purchase for warranty claims.