aigo AZ300 Mid Tower Computer Case User Manual

1. Mawu Oyamba

Thank you for choosing the aigo AZ300 Mid Tower Computer Case. This manual provides detailed instructions for the installation, operation, and maintenance of your new computer case. Please read this manual thoroughly before beginning installation to ensure proper setup and safe use.

Figure 1: aigo AZ300 Mid Tower Computer Case (White)

2. Zambiri Zachitetezo

• Always disconnect the power supply from the wall outlet before installing or servicing any components inside the case.
• Handle tempered glass panels with care. They are fragile and can break if dropped or subjected to impact.
• Avoid placing the case in areas with high humidity, extreme temperatures, or direct sunlight.
• Sungani tizigawo tating'ono ndi zomangira kutali ndi ana.
• Onetsetsani malo oyenera kuti mupewe ngozi zamagetsi.

3. Zamalonda Zathaview

3.1 Gulu la I/O la Kutsogolo

The front I/O panel provides convenient access to essential ports and controls.

Figure 2: Front I/O Panel Layout

• Mtundu C C: 1x USB Type-C port for modern connectivity.
• USB 2.0 Doko: 1x USB 2.0 port for peripheral connections.
• USB 3.0 Doko: 1x USB 3.0 port for high-speed data transfer.
• HD Audio (Headset/Microphone): Separate jacks for audio output and microphone input.
• Reset/LED Button: Resets the system or controls LED lighting (if applicable).
• Batani Lamphamvu: Turns the computer on or off.

3.2 Internal Layout and Component Compatibility

The aigo AZ300 case offers a spacious interior designed for various component sizes and efficient cooling.

Figure 3: Internal Component and Cooling Layout

• Kugwirizana kwa boardboard: Supports ATX, Micro-ATX, and ITX motherboards.
• Storage Drive Bays: 2x 2.5" SSD bays and 2x 3.5" HDD bays.
• Utali wa GPU: Maximum GPU length of 400mm.
• Kutalika kwa PSU: Supports standard ATX power supplies up to 200mm.

4. Unsembe Guide

4.1 Kukonzekera Mlandu

1. Ikani chikwamacho pamalo osalala komanso okhazikika.
2. Carefully remove the tempered glass side panels by unscrewing the thumb screws at each corner. Set the panels aside in a safe place.

Figure 4: Rear-Side View of Case

4.2 Kuyika kwa ma boardboard

1. Install the I/O shield (if not pre-installed) into the rear opening of the case.
2. Align your ATX, Micro-ATX, or ITX motherboard with the standoffs inside the case. Ensure all standoffs match the motherboard's mounting holes.
3. Mangani bolodi la amayi ndi zomangira zomwe zaperekedwa.

Figure 5: Motherboard Mounting Areas

4.3 Kukhazikitsa kwa Power Supply Unit (PSU)

1. Locate the PSU mounting area at the bottom rear of the case.
2. Slide your ATX power supply into the designated slot.
3. Mangani PSU ku chikwamacho ndi zomangira kuchokera kumbuyo.

4.4 Kukhazikitsa Ma Drive Osungirako

1. Ma SSD a 2.5": Mount SSDs to the dedicated 2.5" bays, typically located behind the motherboard tray or in specific drive cages.
2. Ma HDD a 3.5": Install HDDs into the 3.5" drive cages, usually found at the bottom front of the case.
3. Secure all drives with the appropriate screws.

Figure 6: Rear Internal View with Drive Bays

4.5 Kukhazikitsa Khadi Lokulitsa (GPU)

1. Chotsani zophimba zofunikira za malo owonjezera kumbuyo kwa chikwamacho.
2. Ikani khadi lanu la zithunzi kapena makadi ena owonjezera m'malo oyenera a PCIe pa bolodi la amayi.
3. Mangani makadi ndi zomangira.

4.6 Kukhazikitsa Kozizira

The aigo AZ300 supports flexible cooling configurations.

• Thandizo la Mafani: Multiple 120mm fan mounting points are available at the top, front, and rear.
• Chithandizo cha Radiator: Supports water coolers with radiators of 360mm, 240mm, and 120mm in designated areas.

4.7 Kasamalidwe ka Chingwe

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables for improved airflow and aesthetics.

5. Ntchito

After all components are installed and connected, reattach the tempered glass side panels. Connect your peripherals, monitor, and power cable. Press the power button on the front I/O panel to start your system.

Use the USB ports (Type-C, USB 2.0, USB 3.0) for connecting external devices. The HD Audio jacks are for headphones and microphones.

6. Kusamalira

Regular maintenance helps ensure optimal performance and longevity of your computer components.

6.1 Kuyeretsa Fumbi la Fumbi

The aigo AZ300 case is equipped with dust filters to prevent dust buildup. Clean these filters periodically.

• Top Magnetic Dust Filter: Gently lift and remove the magnetic dust filter from the top panel. Clean it with compressed air or rinse with water (ensure it's completely dry before reattaching).
• PSU Fumbi Fyuluta: The dust filter for the power supply is located at the bottom of the case. Slide it out for cleaning.

Figure 7: Side Panel and Bottom Dust Filter Location

7. Mavuto

• Dongosolo silikugwira ntchito: Ensure all power cables (24-pin ATX, 8-pin CPU, GPU power) are securely connected. Check that the power supply switch is in the 'ON' position. Verify front panel power button connection to the motherboard.
• Palibe chiwonetsero: Confirm the monitor is connected to the graphics card (not the motherboard integrated graphics, unless no dedicated GPU is present). Reseat the graphics card and RAM modules.
• Kutentha kwambiri: Ensure all case fans are spinning and oriented correctly for airflow (intake/exhaust). Clean dust filters and internal components. Verify CPU cooler installation.
• USB ports not working: Check that the USB headers from the front panel are correctly connected to the motherboard.

8. Zofotokozera

9. Chitsimikizo ndi Thandizo

aigo strives to provide excellent customer service. If you encounter any quality issues with your aigo AZ300 computer case, please contact us directly. We will assist you with troubleshooting and resolution.

For support, please refer to the contact information provided with your purchase or visit the official aigo webmalo.