Cloudy Bay 6-inch Ultra Thin LED Recessed Light Instruction Manual

1. Mawu Oyamba

Thank you for choosing the Cloudy Bay 6-inch Ultra Thin LED Recessed Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before beginning installation and retain them for future reference.

2. Zambiri Zachitetezo

• CHENJEZO: Kuopsa kwa Kugwedezeka kwa Magetsi. Lumikizani mphamvu pa fuse kapena chophwanyika musanayike kapena kutumizira.
• Izi ziyenera kukhazikitsidwa motsatira malamulo oyika omwe akugwiritsidwa ntchito ndi munthu wodziwa ntchito yomanga ndikugwiritsa ntchito mankhwalawo komanso zoopsa zomwe zingachitike.
• Ensure all electrical connections are made correctly and securely.
• Do not alter or modify the fixture. Any alterations may void the warranty and create safety hazards.
• Zoyenera damp locations. Not intended for direct exposure to water.
• IC Rated: Suitable for direct contact with insulation.

3. Zamkatimu Phukusi

Verify that all components are present before installation:

• 6 x 6-inch Ultra Thin LED Recessed Lights (Oil Rubbed Bronze finish)
• 6 x Remote Junction Boxes
• Installation Hardware (e.g., wire nuts, template)

Image: One Cloudy Bay 6-inch LED recessed light with its remote junction box, alongside a stack of five additional lights, all in an oil-rubbed bronze finish.

4. Zofotokozera

Image: Detailed dimensions of the 6-inch recessed light fixture and its remote junction box, including a recommended cut hole size of 6-1/4 inches.

Chithunzi: Chapafupi view of the recessed light's features, highlighting the durable aluminum body, sponge gasket, UL listed quick connectors, CCT toggle switch, and various certifications like Damp Location, IC Rated, ETL, JA8, and CRI90+.

5. Unsembe Guide

Muuni Yoyikiratu:

• Onetsetsani kuti mphamvu ZIMIMI pa chophwanyira dera.
• Confirm the ceiling material is suitable for recessed lighting.
• Use the provided template to mark the cut hole.

Masitepe oyika:

1. Cut a 6-1/4 inch hole: Use the provided 1:1 hole template to accurately cut a 6-1/4 inch diameter hole in the ceiling.
2. Open the Junction Box and Make Connections: Open the remote junction box. Feed the supply wires into the knockout hole. Connect the house wiring (Live, Neutral, Ground) to the corresponding wires in the junction box using appropriate wire connectors. Ensure all connections are secure.
3. Sankhani Kutentha kwa Mtundu: Before inserting the junction box into the ceiling, locate the CCT (Correlated Color Temperature) toggle switch inside the junction box. Select your desired color temperature (3000K, 4000K, or 5000K). This setting cannot be changed after the junction box is installed without removing it.
4. Insert the Junction Box: Carefully insert the remote junction box through the cut hole into the ceiling. The compact design allows it to fit into tight spaces.
5. Lumikizani Kuwala: Connect the cable from the recessed light fixture to the junction box. Ensure the connection is firm.
6. Ikani Light Fixture: Hold the spring clips on the sides of the recessed light fixture against the fixture body. Gently guide the fixture into the ceiling hole until the clips snap into place, securing the light flush with the ceiling.

Image: Visual representation of the four main installation steps: cutting the hole, connecting wires in the J-Box, inserting the J-Box, and securing the light fixture with spring clips.

6. Malangizo Ogwiritsira Ntchito

Kusankha Kutentha kwa Mtundu:

The Cloudy Bay recessed light offers three selectable color temperatures: 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight). The desired color temperature must be selected using the CCT toggle switch located inside the remote junction box kale installation. Once installed, the setting is fixed unless the junction box is accessed again.

Image: Visual guide to color temperature options (3000K Warm White, 4000K Cool White, 5000K Daylight) and the location of the CCT toggle switch on the junction box for selection.

Dimming Kachitidwe:

This LED recessed light is dimmable from 10% to 100% with most standard LED dimmers. For optimal performance and to avoid flickering or buzzing, an ELV (Electronic Low Voltage) dimmer is highly recommended. Refer to the dimmer manufacturer's instructions for proper installation and operation.

Image: A living room setting showcasing the dimming range of the recessed lights, from 10% to 100% brightness.

Dimmers Zogwirizana:

For a comprehensive list of compatible dimmers, please refer to the table below. Using a non-compatible dimmer may result in reduced performance or damage to the fixture.

Image: A table listing various compatible dimmer models from brands like Lutron, Leviton, and Cloudy Bay, along with their dimming ranges and performance notes.

7. Kusamalira

The Cloudy Bay LED Recessed Light requires minimal maintenance. To clean the fixture, ensure power is disconnected at the circuit breaker. Use a soft, dry, or slightly damp cloth to wipe the surface. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components. There are no user-serviceable parts inside the fixture.

8. Mavuto

9. Chitsimikizo ndi Thandizo

This Cloudy Bay LED Recessed Light is covered by a Chitsimikizo chochepa cha chaka chimodzi kuyambira tsiku logula. Chitsimikizochi chimaphimba zolakwika pa zipangizo ndi kapangidwe kake komwe kamagwiritsidwa ntchito mwachizolowezi. Sichiphimba kuwonongeka komwe kumachitika chifukwa cha kuyika kosayenera, ngozi, kugwiritsa ntchito molakwika, kugwiritsa ntchito molakwika, kapena kusintha kosaloledwa.

For warranty claims, technical support, or any questions regarding your product, please contact Cloudy Bay customer service. Please have your model number (LJD006ORB3C-6PK) and proof of purchase available when contacting support.

Zambiri zamalumikizidwe: Chonde onani za opanga webtsamba lanu kapena zikalata zanu zogulira kuti mudziwe zambiri zamakono zolumikizirana.