FLUX Dart Narrow Wheelchair Instruction Manual

1. Mawu Oyamba

This manual provides essential information for the safe and effective use, assembly, and maintenance of your FLUX Dart Narrow Wheelchair. Please read all instructions carefully before initial use and retain this manual for future reference.

2. Zambiri Zachitetezo

• Always engage the wheel locks before transferring in or out of the wheelchair.
• Onetsetsani kuti zigawo zonse zatsekedwa bwino musanagwiritse ntchito.
• Musapitirire kulemera kwakukulu kwa 300 lbs.
• Avoid using the wheelchair on uneven or excessively sloped surfaces without assistance.
• Regularly inspect the wheels, brakes, and frame for any signs of wear or damage.
• Keep hands and clothing clear of moving parts, especially wheels and height adjustment mechanisms.

3. Zamalonda Zathaview ndi Components

The FLUX Dart Narrow Wheelchair is designed for indoor mobility, featuring a compact width and adjustable elements for user comfort and accessibility.

Zofunika Kwambiri:

• Narrow Design: 21.75" total width for navigating small spaces and standard doorways.
• Kutalika kwa Mpando Wosinthika: Pneumatic adjustment from 19" to 22" to accommodate various table heights and facilitate transfers.
• Ma Armrest Ozungulira: Allows for easier transfers and closer access to desks or tables.
• Dual Propulsion Options: Can be self-propelled using feet or hands, or pushed by an attendant using the push bar.
• Malo Omasuka: Padded 18" wide seat and ventilated backrest.

Chizindikiritso cha Chigawo:

1. Chimango Chachikulu
2. Mpando Khushoni
3. Kumbuyo
4. Flip-Up Armrests
5. 20" Rear Wheels
6. 5" Front Casters
7. Footrests (if included with model)
8. Push Bar
9. Wheel Locks
10. Seat Height Adjustment Lever

4. Kukhazikitsa ndi Kusintha

4.1 Msonkhano Woyamba

The FLUX Dart Wheelchair typically arrives partially assembled. Follow these general steps for final setup:

• Carefully remove the wheelchair from its packaging.
• Tsegulani chimango cha chikuku mpaka chitseke.
• Attach the footrests (if not pre-installed) by aligning them with the attachment points and securing them according to the specific mechanism (e.g., pins, levers).
• Ensure all wheels are properly attached and rotate freely.

4.2 Kusintha kwa Kutalika kwa Mpando

The seat height can be adjusted pneumatically to suit individual needs and different environments.

1. Locate the seat height adjustment lever, typically found under the seat.
2. To raise the seat, lift the lever while applying minimal weight to the seat. The seat will rise automatically.
3. To lower the seat, lift the lever while seated, allowing your body weight to gently lower the seat to the desired height.
4. Tulutsani lever kuti mutseke mpando pamalowo.

4.3 Kusintha kwa Armrest

The armrests are designed to flip up for convenience.

• To raise an armrest, locate the release mechanism (if any) or simply lift the armrest upwards until it locks into the vertical position.
• To lower an armrest, release the lock and gently push it down until it is parallel with the seat.

5. Malangizo Ogwiritsira Ntchito

5.1 Engaging/Disengaging Wheel Locks

The wheel locks are essential for safety during transfers or when stationary.

• To engage the locks, push the levers located near the rear wheels downwards until they click into place.
• To disengage, pull the levers upwards.

5.2 Self-Propulsion

Users can propel the wheelchair using their feet or by pushing the large rear wheels.

• For foot propulsion, ensure footrests are either folded up or removed, and use your feet to push off the floor.
• For hand propulsion, grasp the hand rims on the rear wheels and push forward or backward.

5.3 Attendant Push

The integrated push bar allows an attendant to easily maneuver the wheelchair.

• Ensure the user is seated securely.
• Use the push bar to guide the wheelchair.

5.4 Navigating Tight Spaces

The narrow design of the FLUX Dart is optimized for indoor use.

• Its 21.75" width allows passage through standard interior doorways.
• The combination of large rear wheels and 5" front casters provides maneuverability in confined areas.

6. Kusamalira

6.1 Kuyeretsa

• Pukutani chimangocho ndi malondaamp nsalu ndi detergent wofatsa.
• The seat and backrest fabric can be spot cleaned with a suitable upholstery cleaner.
• Avoid using abrasive cleaners or solvents that may damage the materials.

6.2 Kuyendera

• Regularly check all nuts, bolts, and fasteners to ensure they are tight.
• Inspect tires for wear and proper inflation (if applicable).
• Test wheel locks for proper function.
• Ensure armrests and footrests operate smoothly.

7. Mavuto

• Difficulty on Carpet: The smaller front casters may experience resistance on thick carpets. Consider using the chair on hard floor surfaces or adjusting propulsion technique.
• Armrests Too Low: While armrests are designed to flip up, their fixed height may not suit all users for support during transfers. Ensure proper transfer techniques are used.
• Wheel Locks Not Engaging: Check for debris obstructing the locking mechanism. Ensure the wheels are properly aligned. If issues persist, contact customer support.
• Seat Height Adjustment Issues: If the seat does not adjust smoothly, check for obstructions or contact customer support for assistance.

8. Zofotokozera

9. Chitsimikizo ndi Thandizo

9.1 Ndondomeko Yobwezera

This product is subject to a 30-day return policy for refund or replacement. Please refer to your purchase documentation for specific terms and conditions.

9.2 Lumikizanani ndi Wopanga

For technical support, warranty claims, or replacement parts, please contact Troy Technologies, Inc. directly. Contact information can typically be found on the product packaging or their official webmalo.