WWSUNNY Smart Wi-Fi Roller Shutter Switch User Manual

1. Mawu Oyamba

Thank you for choosing the WWSUNNY Smart Wi-Fi Roller Shutter Switch. This device allows you to control your electric curtains, roller blinds, or garage doors remotely via a smartphone app (eWeLink or Tuya), voice commands (Alexa, Google Home), or directly through its touch panel. It integrates seamlessly into your smart home ecosystem, offering convenience and enhanced control.

Important Note: This switch requires a neutral wire for installation. Please ensure your home wiring includes a neutral wire before purchasing ndi kukhazikitsa.

Image 1.1: The WWSUNNY Smart Wi-Fi Roller Shutter Switch, highlighting 2.4G WiFi, EU/UK standard, and compatibility with Google Assistant and Amazon Alexa. It also shows applications for window roller shutters and garage doors.

2. Zamkatimu Phukusi

• 1 x WWSUNNY Smart Wi-Fi Roller Shutter Switch
• 1 x Buku Logwiritsa Ntchito

3. Zambiri Zachitetezo

• Chitetezo cha Magetsi: Installation must be performed by a qualified electrician or a person with electrical knowledge. Always turn off the main power supply at the circuit breaker before installation or maintenance.
• Chofunikira pa Neutral Waya: This switch requires a neutral wire (N) for proper operation. If your electrical box does not have a neutral wire, this switch is not compatible.
• Katundu Wogwirizana: Ensure the connected device (curtain motor, garage door motor) is electrically controlled and within the switch's load capacity (10A/2200W).
• Chilengedwe: Do not install in excessively humid or hot environments.
• Chitetezo chambiri: The switch includes overload protection. Do not exceed the maximum rated load.

4. Zofotokozera

5. Kuyika

5.1 Chiwonetsero cha Wiring

Before proceeding, ensure the main power supply is OFF at the circuit breaker. This switch requires a neutral wire (N) connection.

Image 5.1: A typical wiring diagram for the smart roller shutter switch. Connect Live (L), Neutral (N), and the motor wires (Up, Down, Common). Ensure all connections are secure.

1. Turn off the main power supply to the circuit where you will install the switch.
2. Remove your old switch (if any) and identify the Live (L), Neutral (N), and motor control wires (typically Up, Down, and a Common wire for the motor).
3. Connect the wires to the corresponding terminals on the WWSUNNY Smart Switch:
• Live wire to 'L' terminal.
• Neutral wire to 'N' terminal.
• Motor Up wire to 'L1' or 'Up' terminal.
• Motor Down wire to 'L2' or 'Down' terminal.
• Motor Common wire to 'COM' terminal (if applicable, refer to your motor's manual).
4. Securely fasten the switch into the wall box.
5. Attach the glass panel.
6. Bwezerani mphamvu pa circuit breaker.

5.2 Kukwera

The switch is designed for wall-mount installation. Ensure the wall box is standard size and provides enough space for wiring. The elegant tempered glass panel provides a waterproof and dustproof finish.

6. Kukhazikitsa

6.1 Kutsitsa Mapulogalamu ndi Kulembetsa Akaunti

1. Koperani ndi eWeLink or Tuya Smart app from the Apple App Store (for iOS) or Google Play Store (for Android).
2. Lembetsani akaunti yatsopano kapena lowani ndi akaunti yomwe ilipo kale.

6.2 Device Pairing (Wi-Fi Connection)

1. Ensure your smartphone is connected to a 2.4GHz Wi-Fi network. (5GHz networks are not supported).
2. Open the eWeLink or Tuya Smart app.
3. Dinani chizindikiro cha '+' pakona yakumanja kuti muwonjezere chipangizo.
4. Follow the on-screen instructions to put the switch into pairing mode. This usually involves pressing and holding one of the touch buttons on the switch until the Wi-Fi indicator light blinks rapidly.
5. Sankhani netiweki yanu ya 2.4GHz Wi-Fi ndikulowetsa mawu achinsinsi.
6. The app will search for and connect to the device. Once connected, you can rename the switch for easy identification.

Chithunzi 6.1: Eksample of the mobile app interface showing scheduling and timer functions for remote control of the switch.

7. Malangizo Ogwiritsira Ntchito

7.1 Manual Touch Control

The switch features a touch-sensitive glass panel for direct control:

• Muvi Wam'mwamba: Touch to open/raise the curtain/blind/garage door.
• Muvi Wapansi: Touch to close/lower the curtain/blind/garage door.
• Imani kaye/Imani: Touch to stop the movement at any desired position.

Image 7.1: A hand interacting with the touch panel of the smart switch, illustrating its direct control capabilities and highlighting features like timing, sharing, overload protection, and mobile control.

7.2 App Control (eWeLink/Tuya Smart)

Once paired, you can control the switch from anywhere using the app:

• Tsegulani/Ttsekani: Tap the respective buttons in the app to fully open or close your curtains/blinds/garage door.
• Imani: Use the stop button to halt movement at any intermediate position.
• Peresentitage Control: Adjust the opening/closing percentage for precise control (if supported by the app and motor).
• Scheduling/Timing: Set up schedules to automatically open or close your curtains at specific times (e.g., open at 7:00 AM, close at 9:00 PM). This function works even if the network is temporarily unavailable.
• Kugawana Chipangizo: Share control of the switch with family members through the app.

Image 7.2: The mobile app displaying options to set schedules, such as opening curtains at 7:00 AM and closing them at 9:00 PM. This feature operates even without an active network connection.

Image 7.3: A user operating a garage door remotely using the mobile application, demonstrating the convenience of smart control for various roller blind applications.

7.3 Kuwongolera Mawu

The switch is compatible with Amazon Alexa and Google Home for convenient voice control:

1. Link your eWeLink or Tuya Smart account to your Alexa or Google Home app.
2. Discover devices in your voice assistant app.
3. Gwiritsani ntchito malamulo amawu monga:
• "Alexa, tsegulani katani."
• "Hey Google, close the garage door."
• "Alexa, set the window to 80%."

Image 7.4: Illustration of voice control functionality, showing Amazon Alexa and Google Home devices being used to command the smart switch to control curtains, such as setting them to 80% open.

8. Kusamalira

• Kuyeretsa: Wipe the glass panel with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Chisamaliro: Avoid dropping or subjecting the switch to strong impacts.

9. Mavuto

• Switch not powering on:
  • Onani ngati magetsi akuluakulu ali oyaka.
  • Verify that the neutral wire (N) is correctly connected. This switch requires a neutral wire.
  • Onetsetsani kuti mawaya onse olumikizidwa ndi otetezeka.
• Sitingathe kulumikiza ku Wi-Fi:
  • Onetsetsani kuti netiweki yanu ya Wi-Fi ndi 2.4GHz. Maukonde a 5GHz sakuthandizidwa.
  • Yang'anani mawu achinsinsi anu a Wi-Fi kuti muwone zolondola.
  • Make sure the switch is in pairing mode (Wi-Fi indicator blinking rapidly).
  • Move the switch closer to your Wi-Fi router during the pairing process.
  • Yambitsaninso rauta yanu ndikuyesanso.
• Curtain/Garage door not responding:
  • Verify that the motor control wires (Up, Down, Common) are correctly connected to the switch.
  • Ensure the motor itself is functioning correctly.
  • Check if the switch is properly paired with the app and has a stable Wi-Fi connection.
• Kuwongolera mawu sikukugwira ntchito:
  • Ensure your eWeLink/Tuya account is correctly linked to Alexa/Google Home.
  • Check if the device is discovered and named appropriately in your voice assistant app.
  • Use clear and precise voice commands.

10. Chitsimikizo ndi Thandizo

Specific warranty information is not provided in this manual. For warranty claims or technical support, please refer to the product packaging or contact your retailer/manufacturer directly. Keep your purchase receipt as proof of purchase.