1. Mawu Oyamba
Thank you for choosing the ANSMANN FL1600R 20W Cordless LED Work Light. This manual provides important information regarding the safe operation, setup, maintenance, and troubleshooting of your new work light. Please read these instructions carefully before use and retain them for future reference.
The ANSMANN FL1600R is designed for various craft activities, offering a balance of performance and mobility. Its compact design, battery operation, and high light output ensure comfortable and efficient work.
2. Malangizo a Chitetezo
Nthawi zonse tsatirani njira zodzitetezera kuti mupewe kuvulala kapena kuwonongeka kwa chinthu:
- Do not look directly into the LED light source when it is active, as this may cause eye damage.
- Sungani chipangizocho kutali ndi ana.
- Musatsegule kapena kusintha chipangizocho. Kukonza kuyenera kuchitidwa ndi anthu oyenerera okha.
- Gwiritsani ntchito chipangizo choyambira chokha chomwe chili ndi magetsi chomwe chili ndi chipangizocho kuti chizichajidwe.
- Ensure the work light is placed on a stable surface to prevent it from tipping over.
- Musagwiritse ntchito chipangizocho ngati chawonongeka mowonekera.
- The work light is IP54 rated for protection against dust and splashing water. Do not immerse it in water.
- Operate the device within the specified temperature range of -20 °C to 50 °C.
3. Zamkatimu Phukusi
Chonde onani phukusi lazinthu izi:
- 1x ANSMANN FL1600R 20W Cordless LED Work Light (approx. 1440 g)
- 1x Power Supply Unit (12 V/1000 mA – European plug)
- 1x Buku Logwiritsa Ntchito
4. Zamalonda Zathaview
The ANSMANN FL1600R features a robust design with a blue frame and a black light housing. It includes an integrated stand for flexible positioning and a handle for portability.
Chithunzi 1: Patsogolo view of the ANSMANN FL1600R 20W Cordless LED Work Light, highlighting its blue frame and black LED housing.
5. Kukhazikitsa
The ANSMANN FL1600R is designed for immediate use. No complex assembly is required.
- Kutulutsa: Carefully remove the work light and all accessories from the packaging.
- Kuyika: Place the work light on a stable, flat surface using its integrated adjustable stand. The stand allows for flexible angling of the light.
- Kukwera Mosasankha: The work light features an integrated tripod mount for use with compatible tripods (sold separately). It can also be mounted using a wall-mount bracket (see Figure 2).
Figure 2: Illustration of mounting options, including a tripod stand and wall-mount bracket (accessories sold separately).
6. Malangizo Ogwiritsira Ntchito
The work light offers three illumination levels for various needs.
- Yatsani/Zimitsa: Locate the power button, typically on the back or side of the light housing. Press once to turn on the light.
- Kusintha Kuwala: Subsequent presses of the power button will cycle through the brightness levels:
- 25% Kuwala: Approximately 400 lumens, providing up to 10 hours of illumination.
- 50% Kuwala: Approximately 800 lumens, providing up to 6 hours of illumination.
- 100% Kuwala: Approximately 1600 lumens, providing up to 3 hours of illumination.
- Kuzimitsa Mphamvu: After cycling through all brightness levels, pressing the button again will turn off the work light.
Figure 3: Icons illustrating the key features: 20W power, 1600 lumens output, rechargeable battery, and three dimming levels.
Figure 4: The work light in a typical workshop application, demonstrating its portability and utility.
7. Kuyitanitsa Battery
The ANSMANN FL1600R is equipped with a rechargeable Lithium-ion battery.
- Lumikizani Charger: Plug the provided power supply unit into the charging port on the work light. Then, connect the power supply to a suitable wall outlet.
- Chizindikiro Cholipiritsa: The work light typically has an indicator light that shows the charging status. Refer to the specific indicator behavior in the product's quick start guide if available.
- Nthawi yolipira: A full charge for the 32.6 Wh battery takes approximately 4 to 5 hours.
- Operation During Charging: Ngati lamp is switched on while charging, its brightness will be reduced to 50% to prioritize charging efficiency and prevent overheating.
8. Kusamalira
Kusamalira bwino kumatsimikizira kuti kuwala kwanu kumagwira ntchito kwa nthawi yayitali komanso kogwira ntchito bwino.
- Kuyeretsa: Clean the exterior of the work light with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the charging port is free of dust and debris.
- Posungira: When not in use for extended periods, store the work light in a cool, dry place. It is recommended to charge the battery every 3-6 months to maintain its health.
- Kusamalira Battery: The integrated Lithium-ion battery is not user-replaceable. Do not attempt to open the battery compartment.
9. Mavuto
If you encounter issues with your ANSMANN FL1600R, refer to the following common problems and solutions:
| Vuto | Chifukwa Chotheka | Yankho |
|---|---|---|
| Kuwala sikuyatsa. | Battery yatha. | Limbani batire pogwiritsa ntchito magetsi omwe mwapatsidwa. |
| Kuwala kumakhala kocheperako kapena kumang'ambika. | Kutenga kwa batri kochepa. | Limbitsaninso batire. |
| Kulipiritsa sikuyamba. | Power supply not properly connected or faulty. | Ensure the power supply is securely connected to both the light and the wall outlet. Try a different outlet. Verify the power supply is not damaged. |
| Brightness reduced during charging. | Opaleshoni yachibadwa. | This is an intended feature to protect the battery and charging circuit. Full brightness resumes once charging is complete and the charger is disconnected. |
If the problem persists after attempting these solutions, please contact ANSMANN customer support.
10. Mafotokozedwe aukadaulo
| Mbali | Kufotokozera |
|---|---|
| Nambala ya Model | 1600-0275 |
| Mtundu | ANSMANN |
| Mphamvu | 20 Watts |
| Luminous Flux | 1600 lumens (max) |
| Magawo Owunikira | 25% (400 lm, 10h), 50% (800 lm, 6h), 100% (1600 lm, 3h) |
| Kutentha kwamtundu | 5000 Kelvin (Daylight White) |
| Colour Rendering Index (CRI) | > 80 |
| Mtundu Wabatiri | 4x Lithium-ion (included), 32.6 Wh |
| Nthawi yolipira | 4-5 maola |
| Lowetsani Voltage | 12 Volts (via power supply) |
| Chiyero cha Chitetezo | IP54 (yotetezedwa ndi fumbi ndi madzi owazidwa) |
| Kutentha kwa Ntchito | -20 ° C mpaka 50 ° C |
| Makulidwe (L x W x H) | 8.5 x 28.5 x 27.5 masentimita |
| Kulemera | 1.48kg (1485 g) |
| Zakuthupi | Chitsulo |
| Avereji Yautali Wamoyo | maola 50,000 |
| Chizindikiro Cha Mphamvu | F (as per EU Energy Label) |
Figure 5: Key features of the work light, including 5000K daylight white, CRI > 80, temperature resistance, and IP54 rating.
Figure 6: EU Energy Label for the product, indicating an energy efficiency class of F. For more details, refer to the Nawonso achichepere EPREL.
11. Chitsimikizo ndi Thandizo
ANSMANN provides a 10-year wopanga chitsimikizo for this product, excluding the battery. The battery is subject to standard warranty terms for rechargeable batteries.
For warranty claims, technical support, or spare parts availability, please contact your retailer or ANSMANN customer service directly. Availability of spare parts is guaranteed for 1 year.
Chonde khalani ndi nambala yanu ya chitsanzo (1600-0275) ndi umboni woti mwagula polumikizana ndi othandizira.
12. Zambiri Zachilengedwe
Do not dispose of the device or its battery with household waste. Electronic devices and batteries must be collected separately and recycled in an environmentally sound manner. Please use the return and collection systems available in your country for disposal.
