Buku Lophunzitsira la Schappach DP16VLS Pillar Drill

1. Mawu Oyamba

This manual provides essential information for the safe and efficient operation, assembly, maintenance, and troubleshooting of your Scheppach DP16VLS Pillar Drill. Please read these instructions carefully before using the machine to ensure proper function and to prevent injury or damage.

Image 1: Scheppach DP16VLS Pillar Drill with included vice.

2. Malangizo a Chitetezo

Always observe general safety regulations when working with power tools. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

Machenjezo Azachitetezo:

• Chitetezo cha Malo Ogwirira Ntchito: Malo ogwirira ntchito azikhala aukhondo komanso owala bwino. Malo odzaza kapena amdima amachititsa ngozi. Osagwiritsa ntchito zida zamagetsi m'malo ophulika, monga ngati pali zakumwa zoyaka, mpweya, kapena fumbi.
• Chitetezo cha Magetsi: Mapulagi a zida zamagetsi ayenera kugwirizana ndi soketi. Musasinthe pulagi mwanjira iliyonse. Pewani kukhudzana ndi malo okhala ndi nthaka kapena nthaka.
• Chitetezo Chaumwini: Always wear eye protection. Use hearing protection when operating the drill. Wear appropriate clothing; avoid loose clothing or jewelry that can get caught in moving parts. Secure long hair.
• Kugwiritsa Ntchito Zida ndi Kusamalira: Osakakamiza chida chamagetsi. Gwiritsani ntchito chida choyenera chamagetsi pakugwiritsa ntchito kwanu. Lumikizani pulagi ku gwero la magetsi musanasinthe, kusintha zina, kapena kusunga zida zamagetsi.

Specific Pillar Drill Safety:

• Always secure the workpiece firmly to the drill table using the included vice or clamps. Never hold the workpiece by hand.
• Ensure the drill bit is correctly installed and tightened in the chuck before operation.
• Adjust the drilling depth stop to prevent drilling into the drill table.
• Keep hands clear of the rotating drill bit and all moving parts.
• Allow the motor to reach full speed before beginning to drill.
• Do not attempt to clear chips or debris while the drill is operating.

3. Zamalonda Zathaview ndi Features

The Scheppach DP16VLS is a robust pillar drill designed for precise drilling in various materials including wood, metal, aluminum, and plastic. It features a powerful 500W motor and a variable speed system.

Zofunika Kwambiri:

• Njinga: Powerful 500 Watt motor.
• Liwiro: 5 adjustable speeds ranging from 600 to 2650 revolutions per minute (rpm).
• chuck: Keyed chuck with a capacity of 1.5 to 13 mm.
• Kuzama Kobowola: Maximum drilling stroke of 50 mm.
• Tabu la Ntchito: Robust steel structure, height-adjustable, and inclinable up to 45 degrees.
• Wachiwiri: Includes a vice with a maximum clamping capacity of 62 mm.
• Laser: Integrated positioning laser for precise drilling point alignment.
• Outreach: 105 mm outreach from the column to the chuck center.

Image 2: Diagram illustrating ergonomic handle, precision laser, variable speed, and belt drive.

Image 3: Diagram illustrating adjustable drilling table, chuck capacity, heavy base, and 500W motor.

4. Msonkhano

The Scheppach DP16VLS Pillar Drill is typically supplied partially disassembled. Follow these general steps for assembly. Refer to the detailed assembly diagrams in your product packaging for specific instructions.

1. Base and Column Assembly: Secure the main column to the stable base using the provided fasteners. Ensure all connections are tight.
2. Table Assembly: Attach the work table to the column, ensuring it can be adjusted vertically and rotated freely.
3. Drill Head Assembly: Mount the drill head assembly onto the top of the column. Connect any necessary electrical components as per the wiring diagram.
4. Kuyika kwa Chuck: Install the drill chuck onto the spindle. Ensure it is seated correctly and securely.
5. Handle and Vice: Attach the feed handles and the included vice to the work table.
6. Kuyika Lamba: If not pre-installed, install the drive belt between the motor and spindle pulleys. Adjust belt tension as needed (refer to Maintenance section).

Important: Before first use, verify all fasteners are securely tightened and all components are correctly aligned.

5. Malangizo Ogwiritsira Ntchito

5.1 Preparing for Drilling

• Sankhani Drill Bit: Choose the appropriate drill bit for the material and hole size. Insert it into the chuck and tighten securely with the chuck key.
• Sinthani Liwiro: Open the belt cover and adjust the belt position on the pulleys to select the desired speed. Higher speeds are generally for smaller bits and softer materials, while lower speeds are for larger bits and harder materials. Close the belt cover before operation.
• Adjust Work Table: Loosen the table lock and adjust the work table height and angle as required for your workpiece. Re-tighten the lock securely. The table can be tilted from +45° to -45°.
• Chitetezo Chogwirira Ntchito: Place the workpiece on the table and secure it firmly using the included vice or clamps. Ensure it cannot shift during drilling.
• Set Drilling Depth: Use the depth stop mechanism to set the desired drilling depth. This prevents drilling too deep.
• Yambitsani Laser: Turn on the integrated laser guide to precisely align the drilling point.

Image 4: User drilling into a wooden beam, demonstrating proper workpiece securing.

Image 5: User drilling into a metal workpiece secured by the included vice.

Image 6: Close-up of the depth scale and laser guide for precise control.

5.2 Njira Yobowola

1. Onetsetsani kuti njira zonse zotetezera zikutsatiridwa.
2. Turn on the drill using the power switch. Allow the motor to reach its operating speed.
3. Slowly lower the drill bit into the workpiece using the feed handles. Apply steady, even pressure.
4. Do not force the drill. If the motor slows significantly, reduce feed pressure.
5. Periodically retract the drill bit to clear chips, especially when drilling deep holes in metal.
6. Once the desired depth is reached, retract the drill bit completely from the workpiece.
7. Turn off the drill and wait for the chuck and drill bit to stop rotating before removing the workpiece or making adjustments.

6. Kusamalira

Regular maintenance ensures the longevity and safe operation of your pillar drill.

• Kuyeretsa: After each use, clean the machine of dust, chips, and debris. Use a brush or compressed air. Do not use solvents that may damage plastic parts.
• Mafuta: Periodically lubricate moving parts such as the column, spindle, and feed mechanism with light machine oil.
• Kuvuta kwa Lamba: Check the drive belt tension regularly. A properly tensioned belt should have slight give when pressed. Adjust if too loose or too tight to prevent slippage or excessive wear.
• Chuck Maintenance: Keep the chuck jaws clean and free of debris. Lubricate the chuck mechanism occasionally.
• Kuyang'anira Magetsi: Regularly inspect the power cord and plug for damage. If damaged, have it replaced by a qualified technician.

7. Mavuto

This section addresses common issues you might encounter with your Scheppach DP16VLS Pillar Drill.

8. Zofotokozera

Technical data for the Scheppach DP16VLS Pillar Drill.

• Nambala Yachitsanzo: Chithunzi cha DP16VLS
• Wopanga: Schepach
• Article Khodi: Mtengo wa SCH5906810901
• Makulidwe a Zamalonda: 43.5 x 22 x 60 masentimita
• Kulemera kwa chinthu: 14kg pa
• Zofunika: Chitsulo
• Mtundu: Buluu
• Malizitsani: Kumaliza kowala
• Gwero la Mphamvu: Corded Electric
• Voltage: 230 Volt
• Wattage: 500 Watt
• Ampmkwiyo: 16 Ampere
• Chuck Mphamvu: 1.5 - 13 mm
• Max Drilling Depth: 50 mm
• Mayendedwe: 5 (600-2650 rpm)
• Kuthamanga Kwambiri Kwambiri: 2650 rpm
• Mulingo wa Phokoso: 84 Decibel
• Utali Wachingwe: 2000 mm
• Max Distance Chuck to Table: 170 mm
• Max Distance Chuck to Base: 250 mm
• Kupendekera Patebulo: -45 ° mpaka +45 °
• Zophatikiza: Pillar Drill, Vice

Image 7: Diagram illustrating the 50 mm drilling depth capacity.

Image 8: Diagram showing suitable materials for drilling: wood, steel, metal, aluminum, plastic.

Image 9: Close-up of drill head showing 105 mm outreach from column to chuck center.

9. Chitsimikizo ndi Thandizo

For warranty information, please refer to the documentation included with your purchase or contact Scheppach customer service directly. Keep your proof of purchase for any warranty claims.

Kuti mupeze chithandizo chaukadaulo, zida zosinthira, kapena mafunso okhudza ntchito, chonde funsani wogulitsa wanu wovomerezeka wa Schappach kapena pitani ku Schappach yovomerezeka. webtsamba lazambiri.