lightmaXX CLS Nano RGBW - LED Spot Set User Manual

Zathaview

The lightmaXX CLS Nano RGBW is an LED lighting system featuring four spotlights, designed for use on theater and stage productions. Its compact size and low weight also make it suitable for mobile applications.

Each spotlight is equipped with three powerful 4W QCL LEDs, contributing to a total power consumption of 48 watts. The COB LEDs incorporate red, green, blue, and white primary colors, allowing for the creation of a wide spectrum of other colors through mixing. The beam angle is 25 degrees. Additionally, the QCL LEDs offer stepless dimming from 0-100% and can produce a powerful strobe effect. Control options include DMX and music control.

The lightmaXX CLS Nano RGBW LED Spot Set, showcasing its four individual spotlights mounted on a central bar, with the LEDs emitting green light.

Malangizo a Chitetezo

Please read and understand all safety instructions before operating the device. Failure to do so may result in injury or damage to the product.

• Nthawi zonse gwirizanitsani chipangizochi ndi potulukira magetsi.
• Onetsetsani mpweya wabwino mozungulira chipindacho kuti musatenthedwe.
• Osayika chipangizocho kumvula kapena chinyezi.
• Pewani kuyang'ana maso mwachindunji ku gwero la kuwala.
• Only qualified personnel should perform service or repairs.
• Chotsani magetsi musanayeretse kapena kukonza.

Khazikitsa

Kutulutsa

Carefully remove the CLS Nano RGBW from its packaging. Inspect the unit for any signs of damage during transit. Retain the packaging for future storage or transport.

Kukwera

The CLS Nano RGBW is designed for secure mounting on a lighting stand or truss system. Use appropriate clamps and safety cables (not included) to ensure the unit is securely fastened and cannot fall. Ensure the mounting surface can support the weight of the fixture (7.13 kg).

Kulumikizana

Lumikizani chipangizochi motere:

• Kulumikiza Mphamvu: Use the provided IEC power cable to connect the unit to a suitable mains power outlet.
• Kulumikizana kwa DMX (Mwasankha): For DMX control, connect a 3-pin XLR DMX cable from your DMX controller's output to the unit's DMX IN port. If linking multiple units, connect from the first unit's DMX OUT to the next unit's DMX IN.

Kumbuyo kwatsatanetsatane view of the lightmaXX CLS Nano RGBW, highlighting the power input, DMX In/Out ports, and the digital control display with navigation buttons.

Malangizo Ogwiritsira Ntchito

Pulogalamu Yoyang'aniraview

The control panel on the rear of the unit features a digital display and four buttons:

• MENU: Navigates through the main menu options.
• PA: Increases values or moves up through menu options.
• PANSI: Decreases values or moves down through menu options.
• Lowani: Imatsimikizira zosankha kapena kulowa mu menyu ang'onoang'ono.

Njira Zogwirira Ntchito

The CLS Nano RGBW offers several operating modes:

• Njira ya DMX: For external control via a DMX controller.
• Auto mumalowedwe: Runs pre-programmed light shows automatically.
• Mawonekedwe Oyambitsa Phokoso: Imayankha nyimbo kapena mawu kudzera mu maikolofoni yomangidwa mkati.
• Mtundu Wokhazikika: Imawonetsa mtundu umodzi, wosasinthasintha.

DMX Kuwongolera

To operate the unit via DMX, set the DMX address using the control panel. Refer to the DMX channel chart in the full manual for specific channel functions (e.g., Dimmer, Red, Green, Blue, White, Strobe, Programs).

Mapulogalamu a Magalimoto

Navigate to the Auto mode setting using the MENU button. Use UP/DOWN to select different built-in programs. Press ENTER to confirm. Some programs may allow adjustment of speed or intensity.

Sound-Activated Mode

Select the Sound-Activated mode from the menu. The unit will use its internal microphone to react to ambient sound. Adjust the microphone sensitivity if available in the menu to fine-tune the response.

Static Colour Mode

In Static Color mode, you can manually select a desired color. Use the UP/DOWN buttons to adjust the intensity of Red, Green, Blue, and White LEDs to create custom colors.

The lightmaXX CLS Nano RGBW LED Spot Set displaying a vibrant red color output from its four spotlights.

The lightmaXX CLS Nano RGBW LED Spot Set illuminating with a deep blue color.

The lightmaXX CLS Nano RGBW LED Spot Set producing a bright white light.

The lightmaXX CLS Nano RGBW LED Spot Set emitting a warm yellow light.

The lightmaXX CLS Nano RGBW LED Spot Set displaying a cool cyan light.

The lightmaXX CLS Nano RGBW LED Spot Set showcasing a rich purple illumination.

The lightmaXX CLS Nano RGBW LED Spot Set with its spotlights in an off state, showing the clear lenses.

Kusamalira

Kuyeretsa

Regular cleaning helps maintain optimal performance and appearance. Disconnect the unit from power before cleaning.

• Gwiritsani ntchito nsalu yofewa, yopanda ulusi kuti mupukute kunja.
• Pa magalasi, gwiritsani ntchito chotsukira ma lens chapadera ndi nsalu yofewa kuti musakandane.
• Osagwiritsa ntchito zotsukira, zosungunulira, kapena mankhwala owopsa.

Kusungirako

When not in use for extended periods, store the CLS Nano RGBW in its original packaging or a suitable flight case. Store in a cool, dry place away from direct sunlight and extreme temperatures.

Kusaka zolakwika

Gawoli likukamba za mavuto omwe mungakumane nawo nthawi zambiri. Ngati vutoli likupitirira, funsani chithandizo cha makasitomala.

Zofotokozera

Chitsimikizo ndi Thandizo

This lightmaXX product is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact the seller directly.

For technical support, troubleshooting assistance beyond this manual, or spare parts inquiries, please contact your authorized lightmaXX dealer or the manufacturer's customer service department. Keep your purchase receipt and model number (LIG0015656-000) ready when contacting support.