Mawu Oyamba
This manual provides detailed instructions for the installation, operation, and maintenance of your ECOELER Motion Sensor Light Switch, Model YM2108. This device is designed to provide automatic lighting control in various indoor spaces such as laundry rooms, garages, hallways, and closets, enhancing convenience and energy efficiency.
Image: The ECOELER Motion Sensor Light Switch, Model YM2108, shown installed in a modern bathroom setting, highlighting its compliance with UL, FCC, and California Title 24 standards.
Zofunika Kwambiri
- Kugwiritsa Ntchito Pamanja: Detects presence to automatically activate lights, eliminating the need for manual switching.
- Waya Wapakati Pakufunika: Ensures stable performance; designed for single-pole installations only, not for 3-way circuits.
- Occupancy (OCC) & Vacancy (VAC) Modes:
- OCC Mode: Lights turn on automatically with motion and off when the space is unoccupied.
- VAC Mode: Requires manual activation, then turns off automatically when no motion is detected.
- Zokonda Zokonda: Adjustable time delays, sensitivity, and ambient light level sensing for tailored control.
- High Quality & Compliance: UL Certified, FCC Listed, and California Title 24 Compliant.
- Kugwirizana Kwambiri: Works with 300W LED, 300W CFL, and 600W incandescent light bulbs.
Image: Visual representation of the hands-free control feature, showing the motion sensor light switch seamlessly integrated into different living spaces.
Kuyika Guide
WARNING: Installation should only be performed by a qualified electrician to ensure safety and compliance with local electrical codes. Always turn off power at the circuit breaker before installation.
The ECOELER Motion Sensor Light Switch (Model YM2108) requires a neutral wire for proper operation. It is designed for single-pole applications only and is not compatible with 3-way circuits.
Malangizo pa Wiring:
- Zimitsani mphamvu pa circuit breaker.
- Chotsani khoma lomwe lilipo ndikusintha.
- Identify the wires in your electrical box: Hot (Black), Load (Red), Neutral (White), and Ground (Green or bare copper).
- Connect the wires from the ECOELER switch to your house wiring according to the diagram below. Use the provided terminal caps to secure connections.
- Carefully push the wired switch into the electrical box.
- Gwirizanitsani khoma.
- Bwezerani mphamvu pa circuit breaker.
Image: A clear wiring guide illustrating the connections for the Hot (Black), Load (Red), Neutral (White), and Ground (Green) wires for the YM2108 switch.
Ntchito
The ECOELER Motion Sensor Light Switch offers two primary operation modes and several customizable settings to suit your specific needs.
Njira Zogwirira Ntchito:
- Occupancy Mode (OCC): In this mode, the lights will automatically turn ON when motion is detected and automatically turn OFF after a set delay when no motion is detected. This is ideal for high-traffic areas where automatic lighting is desired.
- Vacancy Mode (VAC): In this mode, the lights must be turned ON manually. They will then automatically turn OFF after a set delay when no motion is detected. This mode is suitable for areas where manual control for turning on the light is preferred, but automatic turn-off is desired for energy saving.
Image: An illustration detailing the Occupancy (Auto on & off) and Vacancy (Manual on & Auto off) modes, with a switch to select between them.
Zokonda Zokonda:
The switch features three adjustable dials to fine-tune its performance:
- TIME (Adjustable Delay Time): Sets how long the lights remain ON after the last detected motion. Adjustable from 15 seconds (TEST) to 30 minutes.
- SENSE (Sensor Sensitivity Range): Adjusts the detection range of the motion sensor. Settings range from 1 (approx. 6.56 ft) to 5 (approx. 29.52 ft).
- LIGHT (Ambient Light Level): Determines the ambient light level at which the sensor will activate the lights. Settings range from 1 (5 lux) to 5 (all day, meaning it will activate regardless of ambient light).
Chithunzi: Mwatsatanetsatane view of the customizable settings on the ECOELER Motion Sensor Light Switch, including dials for Time Delay, Sensitivity, and Ambient Light Level.
Kusamalira
The ECOELER Motion Sensor Light Switch requires minimal maintenance. Periodically, gently wipe the sensor lens and switch surface with a soft, dry cloth to remove dust or debris that may interfere with sensor performance. Do not use abrasive cleaners or solvents.
Kusaka zolakwika
If you experience issues with your ECOELER Motion Sensor Light Switch, consider the following:
- Lights not turning on/off automatically: Verify the selected operation mode (OCC/VAC) and adjust the 'SENSE' (sensitivity) and 'LIGHT' (ambient light level) settings. Ensure there are no obstructions blocking the sensor's field of view.
- Lights turning off too quickly or staying on too long: Adjust the 'TIME' dial to increase or decrease the delay time.
- Lights not turning on at all: Check the circuit breaker to ensure power is supplied to the switch. Confirm that the wiring connections are secure and correct, especially the neutral wire. Test the connected light bulb to ensure it is functional.
Zofotokozera
| Mbali | Kufotokozera |
|---|---|
| Nambala ya Model | YM2108 |
| Operation Mode | OCC / VAC Mode |
| Mawerengedwe Apano | 6 Amps |
| Opaleshoni Voltage | 120 Volts (AC) |
| Contact Type | Nthawi zambiri Open |
| Mtundu Wolumikizira | Clamp |
| Pokwerera | Mtengo wa SPST |
| Makulidwe achinthu (L x W x H) | 4.61 x 2.87 x 2.24 mainchesi |
| Mtundu Wozungulira | 1-way (Single Pole) |
| Mtundu wa Actuator | Relay |
| Contact Material | Mkuwa |
| Mlingo wa Chitetezo Padziko Lonse | IP40 |
| Kutsika kwa Kutentha Kwambiri | 32 madigiri Fahrenheit (0°C) |
| Kutentha Kwambiri Kwambiri | 131 madigiri Fahrenheit (55°C) |
| Mtundu Wowongolera | Sensor yoyenda |
| Mtundu | Choyera |
| Wattage | 600 watts (Incandescent), 300 watts (LED/CFL) |
| Kulemera kwa chinthu | 4.2 pawo |
| Gwero la Mphamvu | Corded Electric |
| Mtundu wa Mababu | LED, CFL, Incandescent |
| Kuphatikiza Zida | Motion sensor switch with plate, User manual |
Image: A visual summary of the product specifications and a list of included accessories such as the wall plate, screws, and terminal caps.
Chitsimikizo ndi Thandizo
The ECOELER Motion Sensor Light Switch (Model YM2108) comes with a Chitsimikizo Chochepa Chazaka 1. This warranty covers manufacturing defects under normal use conditions. In the event of a defect, a replacement or refund may be available.
For warranty claims or technical support, please contact the seller (ECOELER ELECTRIC INC) directly via Amazon for assistance.
