Mawu Oyamba
The HyperGear Wave Portable Wireless Bluetooth Speaker (Model 14704) is designed to deliver high-definition stereo sound in various environments. Its IPX4 waterproof rating makes it suitable for use near water, while the built-in microphone allows for hands-free calls. This manual provides essential information for the proper setup, operation, and maintenance of your speaker.
Image: HyperGear Wave speaker, showcasing its waterproof design with water splashes.
Zamkatimu Phukusi
Onetsetsani kuti zinthu zonse zilipo mu phukusi:
- HyperGear Wave Speaker
- Chingwe Chothandizira cha Stereo cha 3.5mm
- Chingwe cha Micro USB Charging
- Buku la ogwiritsa (chikalatachi)
Image: The HyperGear Wave speaker alongside its included 3.5mm auxiliary cable and Micro USB charging cable.
Khazikitsa
1. Kulipiritsa Spika
Before initial use, fully charge the speaker. Connect the Micro USB Charging Cable to the speaker's charging port and the other end to a USB power source (e.g., wall adapter, computer USB port). The charging indicator light will illuminate during charging and turn off or change color when fully charged.
2. Kuyatsa/Kuzimitsa
Press and hold the Power button (usually marked with a power icon) for approximately 3 seconds to turn the speaker on or off. A sound prompt or LED indicator will confirm the status change.
Malangizo Ogwiritsira Ntchito
1. Kuyanjanitsa kwa Bluetooth
- Ensure the speaker is powered on and within 33 feet (10 meters) of your Bluetooth-enabled device.
- The speaker will automatically enter pairing mode, indicated by a flashing LED light (refer to your speaker's specific LED behavior).
- On your device, navigate to the Bluetooth settings and search for available devices.
- Select "HyperGear Wave" (or similar name) from the list.
- Once paired, the speaker will emit a confirmation sound, and the LED light will become solid.
Wokamba nkhani adzayesa kulumikizanso chipangizo chomaliza cholumikizidwa akayatsidwa.
Image: The HyperGear Wave speaker positioned on sand, demonstrating its wireless capability for outdoor use.
2. Basic Controls
- Sewerani/Imitsani: Dinani batani la Play/Imani kamodzi.
- Onjezani Pamwamba: Dinani batani la '+'.
- Voliyumu Pansi: Dinani batani la '-'.
- Nyimbo Yotsatira: Dinani ndikugwira batani la '+'.
- Njira Yakale: Dinani ndikugwira batani la '-'.
- Yankhani/Imitsani Kuyimba: Dinani batani la Play/Imani kamodzi pa nthawi yoyimba foni.
- Kanani Kuyimba: Dinani ndikusunga batani la Play/Imani pang'ono panthawi yoyimba foni.
3. Audio Input Modes
The HyperGear Wave speaker supports multiple audio input options:
- Mafilimu a Bluetooth: Default wireless connection.
- Auxiliary (AUX) Mode: Connect an audio device using the included 3.5mm Stereo Auxiliary Cable. The speaker will automatically switch to AUX mode when the cable is inserted.
- Mode ya Micro SD Card: Ikani khadi la Micro SD (silikuphatikizidwa) ndi mawu files into the designated slot. The speaker will automatically detect and play music from the card.
Chithunzi: Chapafupi view of the speaker highlighting its compatibility with Bluetooth, Auxiliary input, and Micro SD cards.
Kusamalira
- Kuyeretsa: Gwiritsani ntchito zofewa, damp cloth to clean the speaker's exterior. Avoid harsh chemicals or abrasive cleaners.
- Kuwonekera pamadzi: While IPX4 waterproof, avoid submerging the speaker. Ensure all port covers are securely closed before exposure to water.
- Posungira: Sungani cholankhulira pamalo ozizira, ouma kutali ndi kutentha kwakukulu ndi kuwala kwa dzuwa.
- Kusamalira Battery: Kuti batire lizigwira ntchito nthawi yayitali, pewani kutulutsa mphamvu yonse ya sipika pafupipafupi. Ichajeni nthawi zonse, ngakhale itakhala kuti siikugwiritsidwa ntchito kwa nthawi yayitali.
Image: The HyperGear Wave speaker attached to a kayak, illustrating its suitability for splash-prone environments.
Kusaka zolakwika
- Speaker will not turn on: Onetsetsani kuti batire yachajidwa. Lumikizani chingwe chochajira ndikuyesanso.
- Sitingagwirizane ndi chipangizo cha Bluetooth:
- Onetsetsani kuti sipika ili mu pairing mode (flashing LED).
- Onetsetsani kuti Bluetooth yayatsidwa pa chipangizo chanu.
- Sunthani cholankhulira pafupi ndi chipangizo chanu (mkati mwa mamita 33).
- Turn off and on both the speaker and your device's Bluetooth.
- Forget the speaker from your device's Bluetooth list and attempt to re-pair.
- Palibe phokoso kapena kutsika kwambiri:
- Sinthani kuchuluka kwa voliyumu pa sipika komanso chipangizo chanu cholumikizidwa.
- Ensure the speaker is properly paired or the AUX cable/Micro SD card is correctly inserted.
- Onani ngati gwero la audio likusewera.
- Kusamveka bwino:
- Sonkhanitsani cholankhulira pafupi ndi chipangizo chanu cha Bluetooth kuti mupewe kusokonezedwa.
- Onetsetsani kuti palibe zopinga pakati pa sipikala ndi chipangizo chanu.
- If using AUX, check the cable for damage and ensure it's fully inserted.
Zofotokozera
| Dzina lachitsanzo | HyperGear Wave |
| Nambala ya Model | 14704 |
| Mtundu wa Spika | Panja |
| Kulumikizana Technology | Bluetooth, opanda zingwe |
| Mtundu wa Bluetooth | Mapazi 33 (mamita 10) |
| Kukaniza Madzi | IPX4 yopanda madzi |
| Mphamvu ya Audio Output | 10 Watts |
| Njira Zotulutsa Audio | Sitiriyo |
| Nthawi yosewera | Mpaka maola 4 |
| Gwero la Mphamvu | Yoyendetsedwa ndi Battery |
| Kulemera kwa chinthu | 362.87 Gramu (12.8 ounces) |
| Miyeso Yazinthu | 8.2 x 2.6 x 2.9 mainchesi |
Chitsimikizo ndi Thandizo
Chidziwitso cha Chitsimikizo
This HyperGear product comes with a Limited Warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included in your product packaging or visit the official HyperGear webmalo.
Thandizo la Makasitomala
If you encounter any issues or have questions not covered in this manual, please contact HyperGear customer support. Contact information can typically be found on the product packaging or the official HyperGear webtsamba: www.hypergear.com.
