Artemide Tolomeo Mini 100W E26 Table Lamp Buku Logwiritsa Ntchito

1. Mawu Oyamba

This manual provides comprehensive instructions for the safe and efficient use of your Artemide Tolomeo Mini 100W E26 Table Lamp. Please read this manual thoroughly before installation and operation, and retain it for future reference. The Artemide Tolomeo Mini is designed for indoor use, offering adjustable illumination with its articulated aluminum arm and shade.

2. Zambiri Zachitetezo

• Onetsetsani kuti lamp is connected to a power source within the specified voltagndi osiyanasiyana (120V).
• Do not exceed the maximum bulb wattage of 100W. Use an E26 (medium base) A19 compatible incandescent, compact fluorescent, or LED lamp.
• Always disconnect the power before cleaning, performing maintenance, or replacing the bulb.
• Pewani kuyika lamp in areas with excessive moisture or extreme temperatures.
• Musayese kusintha lamp's electrical components. Refer servicing to qualified personnel.
• Sungani lamp kutali ndi zinthu zoyaka moto.

3. Zamkatimu Phukusi

Onetsetsani kuti zigawo zonse zilipo musanayambe msonkhano:

• Artemide Tolomeo Mini Lamp Arm and Head Assembly
• Zotayidwa Base
• Mthunzi
• Chingwe cha Mphamvu

Image 3.1: All components of the Artemide Tolomeo Mini Table Lamp, including the articulated arm, lamp head, base, and power cord.

4. Malangizo Kukhazikitsa

1. Tulutsani Zigawo: Carefully remove all parts from the packaging and place them on a clean, flat surface.
2. Gwirizanitsani Base: Gwirizanitsani bwino lamp's articulated arm assembly to the aluminum base. Ensure the connection is firm and stable.
3. Ikani Babu: Insert an E26 (medium base) A19 compatible bulb (not included) into the lamp head socket. Do not exceed 100W.
4. Ikani Lamp: Ikani lamp Pamalo okhazikika, athyathyathya.
5. Lumikizani Mphamvu: Lumikizani chingwe chamagetsi pamagetsi okhazikika a 120V.

Image 4.1: The Artemide Tolomeo Mini Table Lamp fully assembled and ready for use.

5. Malangizo Ogwiritsira Ntchito

• Kuyatsa/Kuzimitsa: Lamp features an On/Off switch located on the lamp head. Press or touch the switch to turn the light on or off.
• Kusintha Malo: Lamp's arm structure, made of extruded aluminum, and joints with tension control knobs allow for full adjustability. Gently manipulate the arm and head to direct light as desired. The shade offers 360-degree rotation.

6. Kusamalira

• Kuyeretsa: Chotsani lamp from power. Use a soft, dry cloth to wipe down the aluminum surfaces and shade. Avoid abrasive cleaners or solvents.
• Kusintha Babu: Onetsetsani kuti lamp is unplugged and the bulb has cooled completely. Unscrew the old bulb and screw in a new E26 (medium base) A19 compatible bulb, not exceeding 100W.
• Kupsinjika kwa Mafupa: The tension control knobs on the joints can be adjusted if the arm becomes too loose or too stiff. Turn clockwise to tighten, counter-clockwise to loosen.

7. Mavuto

Lamp sichiyatsa:

Check if the power cord is securely plugged into the outlet and the lamp. Verify that the bulb is correctly installed and not burnt out. Test the outlet with another device.

Kuwala kowala:

Ensure the bulb is screwed in tightly. If using an LED bulb, confirm it is dimmable if connected to a dimmer switch (though this lamp has an On/Off switch on the head). Try a different bulb.

Arm does not hold position:

Adjust the tension control knobs on the joints. Tighten them slightly until the arm holds its desired position.

8. Zofotokozera

9. Chitsimikizo ndi Thandizo

For warranty information, product support, or to inquire about replacement parts, please contact Artemide directly through their official website or customer service channels. Specific warranty terms and conditions may vary and are provided by the manufacturer.