Mawu Oyamba
The Amazon Basics 4K HDMI 3 Port Switch allows you to connect up to three HDMI source devices to a single HDMI display, such as a TV or projector. This device is ideal for expanding the HDMI input capabilities of your display, enabling seamless switching between various entertainment or work devices. It supports 4K resolution at 30Hz and is HDCP compliant, ensuring compatibility with a wide range of modern equipment.
Zambiri Zachitetezo
- Werengani malangizo onse mosamala musanagwiritse ntchito.
- Osaika chipangizocho ku chinyezi, kutentha kwambiri, kapena kuwala kwa dzuwa.
- Use only the provided USB power cable.
- Khalani kutali ndi ana.
- Do not attempt to disassemble or repair the device yourself. Contact qualified service personnel if needed.
Zamkatimu Phukusi
Onetsetsani kuti zinthu zonse zilipo mu phukusi:
- Amazon Basics 4K HDMI 3 Port Switch
- USB Power Cable (for optional power)
- Remote Control (CR2025 battery not included)
Image: The HDMI switch, its remote control, and the USB power cable included in the package.
Zathaview
The HDMI switch features three input ports and one output port, along with a power input and an IR receiver for the remote control.
Chithunzi: Mwatsatanetsatane view of the HDMI switch, highlighting the three HDMI input ports (INPUT1, INPUT2, INPUT3), one HDMI output port (OUTPUT), and the DC 5V power input.
Front Panel
- MPHAMVU LED: Zimasonyeza mphamvu.
- LED1/LED2/LED3: Indicate which HDMI input is currently active.
- SELECTION Button: Manually switch between HDMI inputs.
- Wopeza IR: Imalandila zidziwitso kuchokera ku remote control.
Kumbuyo Panel
- HDMI INPUT 1/2/3: Connect your source devices (e.g., game console, Blu-ray player, computer).
- Kutulutsa kwa HDMI: Connect to your display device (e.g., TV, projector, monitor).
- Kufotokozera: DC 5V Power input port (optional for some setups, required for 4K resolution or longer cables).
Khazikitsa
Follow these steps to connect your HDMI switch:
- Lumikizani Zida Zoyambira: Plug your HDMI source devices (e.g., gaming console, media player, computer) into the HDMI INPUT 1, 2, and 3 ports on the switch using HDMI cables (sold separately).
- Connect Display Device: Connect your TV, monitor, or projector to the HDMI OUTPUT port on the switch using an HDMI cable (sold separately).
- Connect Power (Optional/Recommended): Insert the small end of the included USB power cable into the DC 5V port on the switch. Plug the USB-A end into a USB power adapter (not included) or a USB port on your TV/computer. While the switch can draw power from HDMI sources, connecting the USB power cable is recommended for stable performance, especially with 4K resolutions or longer HDMI cables.
- Yatsani: Ensure all connected devices and the display are powered on. The switch will automatically detect the active input or you can select it manually.
Image: The HDMI switch connected to a laptop via an HDMI input, with the output connected to a display (not fully visible). This illustrates a typical setup.
Kuchita
The HDMI switch offers two methods for selecting inputs:
Kusintha kwa Automatic
The switch is designed to automatically detect and switch to a newly activated HDMI source. If multiple sources are active, it will typically prioritize the lowest numbered input (Input 1, then Input 2, etc.) or the last active input.
Kusintha Pamanja
- Using the SELECTION Button: Press the 'SELECTION' button on the front panel of the switch to cycle through the available HDMI inputs (Input 1 → Input 2 → Input 3 → Input 1...). The corresponding LED will illuminate to indicate the active input.
- Kugwiritsa Ntchito Remote Control: Point the remote control towards the IR receiver on the front of the switch. Press the desired input number button (1, 2, or 3) to switch directly to that input. Ensure a CR2025 battery is installed in the remote control.
Kusaka zolakwika
| Vuto | Chifukwa Chotheka | Yankho |
|---|---|---|
| No picture/signal on display. |
|
|
| Picture flickers or drops out. |
|
|
| Kuwongolera kutali sikukugwira ntchito. |
|
|
| Automatic switching not working as expected. | Some devices maintain an active signal even when off, preventing auto-switching. | Use manual switching via the button on the switch or the remote control. |
Zofotokozera
| Mbali | Tsatanetsatane |
|---|---|
| Nambala ya Model | AZSW3T1A-4K2K |
| Mtundu wa HDMI | HDMI 1.4 (Supports 4K@30Hz) |
| Kutsata kwa HDCP | HDCP 1.4 |
| Lowetsani Madoko | 3 x HDMI |
| Zotuluka Madoko | 1 x HDMI |
| Zosankha Zothandizira | Up to 4K (3840x2160) @ 30Hz, 1080p, 720p, etc. |
| Audio Support | Amathandiza zosiyanasiyana zomvetsera akamagwiritsa |
| Magetsi | DC 5V via USB (optional, USB cable included) |
| Njira Zowongolera | Manual button, IR remote control |
| Makulidwe (L x W x H) | 4.49 x 0.79 x 2.8 mainchesi (11.4 x 2.0 x 7.1 cm) |
| Kulemera | 6.9 ounces (195.6 magalamu) |
Kusamalira
- Tsukani chipangizocho ndi nsalu yofewa komanso youma. Musagwiritse ntchito zotsukira zamadzimadzi kapena zopukutira mpweya.
- Keep the device free from dust and debris to ensure proper ventilation.
- Sungani pamalo ozizira, owuma osagwiritsidwa ntchito kwa nthawi yayitali.
Chitsimikizo ndi Thandizo
For warranty information and customer support, please refer to the Amazon Basics official website or contact Amazon customer service directly. Keep your purchase receipt for warranty claims.
