1. Zamalonda Zathaview
The Waveshare 7-inch HDMI LCD (H) is a versatile capacitive touch screen monitor featuring a 1024x600 IPS display with a toughened glass cover. Designed for broad compatibility, it supports various single-board computers and systems, offering a responsive and clear visual interface.
Zofunika Kwambiri:
- Chiwonetsero cha 7-inch IPS: Provides a wide viewing angle and vibrant colors.
- 1024x600 Resolution: Offers clear and crisp visuals.
- Kukhudza Kogwira Ntchito: Supports 5-point touch (driver-free for most supported systems).
- Toughened Glass Cover: Enhances durability and protection.
- Kugwirizana Kwambiri: Works with Raspberry Pi (all versions), Jetson Nano, PCs (Windows 10/8.1/8/7), and various game consoles (Xbox360, PS4, Switch).
- Ntchito Yopanda Dalaivala: Plug-and-play functionality for many supported operating systems.
2. Zamkatimu Phukusi
Onetsetsani kuti zonse zomwe zalembedwa pansipa zikuphatikizidwa mu phukusi lanu:
- 1x 7-inch HDMI LCD (H) Monitor
- 2x Brackets (for stand)
- 1 x HDMI Chingwe
- 1x USB-A kupita ku Type-C Chingwe
- 1x Mini HDMI to HDMI Adapter
- 2x Zopangira zazitali
- 4x Copper Screws
- 4x Zomangira Zochepa
- 1 x Screwdriver
- 1x Buku Logwiritsa Ntchito
3. Zofotokozera
| Mbali | Kufotokozera |
|---|---|
| Kuwonetsa Screen | 7 inchi |
| Mtundu wa Panel | IPS |
| Mtundu wa Touch | 5-point Capacitive Touch |
| Kusamvana | 1024 x600 pa |
| Kuwala | 420 cd/m² |
| Viewngodya | 170° (H) / 170° (V) |
| Mtengo Wotsitsimutsa | 60Hz pa |
| Chiyankhulo | HDMI, Type-C, 3.5mm Audio |
| Lowetsani Voltage | 5V |
| Mphamvu Zonse (Max) | 2.55W |
| Kutentha kwa Ntchito | -20°C ~ 60°C |
| Kutentha Kosungirako | -30°C ~ 70°C |
| Kulemera kwa katundu | 0.9 lbs (10.6 ounces) |
| Screen Dimensions (L×W×D) | 165x102x15mm (6.5x4.0x0.6 in) |
| Display Area (L×W) | 154x86 mm |
| Machitidwe Othandizira | Windows 11/10/8.1/8/7, Raspbian, Ubuntu, Kodi |
4. Kukhazikitsa ndi Kuyika
4.1 Attaching the Stands
- Carefully remove the protective film from the included stand brackets.
- Align the brackets with the screw holes on the back of the monitor.
- Secure the brackets using the provided long screws and screwdriver. Do not overtighten.
4.2 Raspberry Pi Connection Setup
To ensure proper functionality with Raspberry Pi, specific configuration changes are required:
- Insert your Raspberry Pi's SD card into a computer.
- Tsegulani
config.txtfile located in the root directory of the SD card. - Add the following lines at the end of the file:
max_usb_current=1
hdmi_force_hotplug=1
config_hdmi_boost=7
hdmi_group=2
hdmi_mode=87
hdmi_drive=1
display_rotate=0
hdmi_cvt 1024 600 60 6 0 0 0If you are using the official Raspberry Pi OS (2021-10-30), change:
dtoverlay=vc4-kms-v3d
to:
#dtoverlay=vc4-kms-v3d- Save the changes and safely eject the SD card.
- Insert the SD card back into your Raspberry Pi.
- Connect the HDMI and TOUCH interfaces of the monitor to the Raspberry Pi's card.
- Power up the Raspberry Pi, and the display and touch functionality should work properly.
4.3 PC Connection Setup
For PC connection, set the resolution according to the instructions in the manual. If using dual monitors, configure the primary and secondary screens, and adjust the resolution for each monitor accordingly.
5. Kugwiritsa ntchito Monitor
5.1 Menyu Yowonetsera Pawonekedwe (OSD).
The monitor features tactile buttons on the back for navigating the OSD menu. These buttons allow you to adjust various display settings.
- Menyu: Press to open the main menu, then press again to enter a sub-menu.
- Left/Up: Navigate left/up in the menu, or decrease values.
- Right/Down: Navigate right/down in the menu, or increase values.
- Bwererani: Exit the current menu or return to the previous menu.
- Mphamvu: Yatsani / zimitsani chiwonetserocho.
5.2 Kukhudza Kukhudza
The capacitive touch screen supports up to 5-points touch, depending on the operating system. This allows for intuitive interaction with compatible devices.
6. Kusamalira
Kuti muwonetsetse kuti zowunikira zanu zizikhala ndi moyo wautali komanso zogwira ntchito bwino, tsatirani malangizo awa:
- Kuyeretsa: Use a soft, dry cloth to clean the external housing. For the screen, use a soft cloth slightly dampened with water or a non-abrasive screen cleaner. Avoid harsh chemicals.
- Kusamalira: Avoid dropping the monitor or subjecting it to strong impacts. Do not place heavy objects on the screen.
- Chilengedwe: Keep the monitor in a well-ventilated area, away from direct sunlight, heat sources, and excessive moisture.
7. Mavuto
- Monitor is not powering on: Ensure the power cable is properly plugged into the Raspberry Pi and the included USB-A to C cable is securely connected between the board and the display.
- Image is reversed: The monitor does not support image flip.
- Touch functionality not working: Make sure the USB-A to C cable is connected between the Raspberry Pi board and the display, directly from the display to the power socket.
- No signal on display: Ensure the HDMI cable is properly connected between the Raspberry Pi board and the display. If using a mini HDMI port, make sure to use the included mini HDMI to HDMI adapter.
- Makina ogwiritsira ntchito amathandizidwa: Windows 11/10/8.1/7, Raspbian, Ubuntu, Kodi.
- Using with PS3/PS4/Xbox One/Xbox 360: Yes, please use the HDMI port.
- Power source shut off, monitor not turning back on: If the monitor will come back on, or do you have to press the button.
- Palibe phokoso: This monitor has no built-in speakers. For sound output, connect external speakers via the 3.5mm audio jack.
8. Chitsimikizo ndi Thandizo
The product comes with a 12-month warranty for quality-related issues. You can return any undamaged product within 12 months for a refund or replacement. Shipping costs and import duties/taxes are not included in the refund/replacement process.
Zambiri zamalumikizidwe:
- Webtsamba: www.eyoyousa.com
- Imelo: support@eyoyomonitor.com
- Tel: 909-317-8588 (9:00AM-5:00PM; Monday-Friday)
- USA Office Address: 10700 Jersey Blvd Ste 640, Rancho Cucamonga, CA 91730, USA
9. Media Gallery
Zithunzi Zamalonda
