1. Mawu Oyamba
This manual provides essential information for the safe and effective operation, setup, and maintenance of your Einhell Power X-Change 140Nm Cordless Impact Driver TE-CI 18/1 Li Solo. Please read these instructions carefully before using the tool and keep them for future reference. This product is designed for driving and removing screws and for light drilling tasks in wood and metal, utilizing its impact mechanism for high torque applications.
2. General Safety Malangizo
Always observe the following safety precautions when using power tools to prevent electric shock, fire, and serious injury.
- Chitetezo cha Malo Ogwirira Ntchito: Malo ogwirira ntchito azikhala aukhondo komanso owala bwino. Malo odzaza kapena amdima amachititsa ngozi. Osagwiritsa ntchito zida zamagetsi m'malo ophulika, monga ngati pali zakumwa zoyaka, mpweya, kapena fumbi.
- Chitetezo cha Magetsi: Pewani kukhudzana ndi thupi ndi zinthu zadothi kapena zozikika monga mapaipi, ma radiator, mtunda, ndi mafiriji. Pali chiopsezo chowonjezereka cha kugwedezeka kwa magetsi ngati thupi lanu lili ndi dothi kapena pansi.
- Chitetezo Chaumwini: Always wear eye protection. Use safety glasses, goggles, or a face shield. Wear hearing protection when operating the tool for extended periods. Dress properly; do not wear loose clothing or jewelry. Keep your hair, clothing, and gloves away from moving parts.
- Kugwiritsa Ntchito Zida ndi Kusamalira: Musakakamize chida chamagetsi. Gwiritsani ntchito chida chamagetsi choyenera pa pulogalamu yanu. Chidzachita ntchitoyo bwino komanso motetezeka malinga ndi liwiro lomwe chinapangidwira. Chotsani batire pa chipangizo chamagetsi musanasinthe chilichonse, kusintha zowonjezera, kapena kusunga zida zamagetsi.
- Kugwiritsa Ntchito ndi Kusamalira Ma Batri Paketi: Limbikitsaninso chojambulira chomwe wopanga adachipanga. Chaja chomwe chili choyenera mtundu umodzi wa batire pack chikhoza kuyambitsa ngozi yamoto chikagwiritsidwa ntchito ndi batire lina. Gwiritsani ntchito zida zamagetsi zokha ndi mapaketi osankhidwa a batri.
3. Zamalonda Zathaview ndi Features
The Einhell TE-CI 18/1 Li Solo is a cordless impact driver designed for efficient screwdriving tasks. It is part of the Power X-Change family, allowing for interchangeable battery use with other Einhell tools.
- Kutulutsa Kwamphamvu Kwambiri: Delivers up to 140 Nm of torque, suitable for driving large or long screws.
- Variable Speed Control: Electronic speed control allows for precise adjustment, ideal for delicate applications.
- 1/4" Hex Bit Mount: Features a 6.35 mm (1/4") hexagon fitting for quick and secure bit changes.
- Kuphatikiza Kuwunikira kwa LED: Three power LEDs provide optimal illumination of the work area.
- Mapangidwe a Ergonomic: Short, lightweight design with Softgrip surfaces ensures comfortable and tireless operation.
- Zomangamanga Zolimba: Features an aluminum housing and rubber supports for enhanced protection and ruggedness.
- Belt Clip: A practical belt clip is included for convenient carrying and access during work.
Figure 1: The Einhell TE-CI 18/1 Li Solo Cordless Impact Driver, illustrating its compact design and the Power X-Change battery interface (battery sold separately).
4. Kukhazikitsa
4.1 Battery Installation (Battery and Charger Sold Separately)
- Ensure the battery is fully charged using an Einhell Power X-Change charger.
- Align the battery pack with the base of the impact driver.
- Slide the battery pack into the tool until it clicks securely into place. Ensure it is firmly seated before operation.
- To remove the battery, press the release button(s) on the sides of the battery pack and slide it out.
4.2 Bit Insertion and Removal
The impact driver uses a 1/4" (6.35 mm) hexagon fitting for impact-resistant bits.
- Pull the quick-change chuck sleeve forward.
- Insert the hexagon bit fully into the chuck.
- Release the sleeve. The bit should be securely locked in place. Pull on the bit to confirm it is properly seated.
- To remove the bit, pull the sleeve forward again and extract the bit.
Figure 2: Detail of the 1/4" hex bit mount and the three integrated LED lights, providing clear visibility of the work area.
5. Malangizo Ogwiritsira Ntchito
5.1 Kuyatsa / Kuzimitsa ndi Kuwongolera Kuthamanga
- Poyambira: Press the ON/OFF switch (trigger). The integrated LEDs will illuminate the work area.
- Liwiro Kusintha: The speed of the impact driver is controlled by the pressure applied to the ON/OFF switch. Pressing lightly results in lower speed, while pressing fully increases the speed up to 2300 RPM.
- Kuyimitsa: Tulutsani chosinthira ON/OFF.
5.2 Njira Yozungulira
The direction of rotation (forward/reverse) is controlled by the selector switch located above the trigger.
- Forward Rotation (Screwing In): Push the selector switch to the left.
- Reverse Rotation (Screwing Out): Push the selector switch to the right.
- Lock Position: When the selector switch is in the middle position, the ON/OFF switch is locked, preventing accidental activation. Always engage the lock when not in use or when changing bits.
5.3 Using the Impact Driver
- Select the appropriate impact-resistant bit for your screw type and material.
- Position the bit firmly on the screw head.
- Start the tool by gently pressing the trigger, increasing pressure as needed. The impact mechanism will engage automatically when resistance is met, providing additional torque.
- Maintain a firm grip on the tool. The low reverse torque design helps reduce strain on the user.
Figure 3: An individual demonstrating the use of the Einhell impact driver for driving a screw into a wooden surface, highlighting its practical application.
6. Kusamalira
Kusamalira pafupipafupi kumatsimikizira kukhala ndi moyo wautali komanso kuchita bwino kwa woyendetsa wanu.
- Kuyeretsa: Mukamaliza kugwiritsa ntchito, yeretsani nyumba ya chidacho ndi chofewa, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure ventilation openings are free from dust and debris.
- Posungira: Store the impact driver and battery pack in a dry, secure location, away from direct sunlight and extreme temperatures. Ensure the battery is removed from the tool before storage.
- Kuyendera: Periodically check all screws and fasteners for tightness. Inspect the power tool for any signs of damage or wear. Do not use a damaged tool.
7. Mavuto
| Vuto | Chifukwa Chotheka | Yankho |
|---|---|---|
| Chida sichimayamba. | Battery not charged or improperly inserted. Selector switch in lock position. | Charge battery. Ensure battery is fully inserted. Move selector switch to forward or reverse. |
| Kuchepetsa mphamvu kapena ntchito. | Low battery charge. Incorrect bit for application. Overheating. | Recharge battery. Use appropriate impact-rated bit. Allow tool to cool down. |
| Pang'ono osagwira motetezeka. | Chuck sleeve not fully released. Bit not fully inserted. | Ensure chuck sleeve snaps back into place. Push bit in completely. |
8. Zofotokozera
| Mbali | Tsatanetsatane |
|---|---|
| Mtundu | Einhell |
| Nambala ya Model | TE-CI 18/1 Li Solo (4510034) |
| Gwero la Mphamvu | Battery Powered (18V Power X-Change) |
| Kuthamanga Kwambiri Kwambiri | 2300 rpm |
| Maximum Torque | 140 Newton Mamita |
| Bit Mount | 1/4" (6.35 mm) Hexagon |
| Voltage | 18 volts |
| Kulemera kwa chinthu | 1.18 Kilogram (2.58 pounds) |
| Miyeso Yazinthu | 7.8"L x 3.03"W x 6.65"H |
| Zakuthupi | Rubber, Aluminium |
| Kuphatikiza Zida | Akku-Schlagschrauber (Impact Driver Body Only) |
| Mabatire Akuphatikizidwa? | Ayi |
| Mabatire Amafunika? | Yes (18V Lithium Ion) |
9. Chitsimikizo ndi Thandizo
Einhell Power Tools come with a standard 2-year warranty. An additional 1-year warranty is available upon product registration, extending the total warranty period to 3 years. For warranty claims, technical support, or spare parts, please contact Einhell customer service or visit the official Einhell webmalo.
The intelligent ABS Battery Electronics and high-performance Li-Ion cells in Power X-Change batteries ensure efficiency, reliability, and durability.
