ABAC Pole Position 24 Litre Air Compressor User Manual

Mawu Oyamba

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your ABAC Pole Position 24 Litre Air Compressor. Please read this manual thoroughly before operating the compressor and keep it for future reference.

The ABAC Pole Position 24 Litre Air Compressor is designed for various DIY and light professional tasks, featuring a 24-litre tank, 2 HP (1.5 kW) motor, 220 litres/minute air intake, and a maximum pressure of 10 bar.

Malangizo a Chitetezo

Always observe the following safety precautions to prevent personal injury or damage to the compressor:

• Onetsetsani kuti kompresa yayikidwa pamalo okhazikika, osasunthika.
• Osagwiritsa ntchito kompresa ponyowa kapena damp mikhalidwe.
• Wear appropriate personal protective equipment (PPE), such as eye protection and hearing protection.
• Before any maintenance or inspection, disconnect the compressor from the power supply and ensure the tank is fully depressurized.
• Never direct compressed air at people or animals.
• Sungani ana ndi anthu osaloledwa kutali ndi malo opangira opaleshoni.
• Regularly check all connections and hoses for leaks or damage.

Zigawo Pamwambaview

• Air thanki: Stores compressed air (24 litres capacity).
• Msonkhano wa Motor ndi Pampu: Generates compressed air.
• Zoyezera Kupanikizika: Display tank pressure and regulated outlet pressure.
• Pressure Regulator: Adjusts the output air pressure.
• Cholumikizira Chachangu: For attaching air tools and hoses.
• Valavu yotseka: Located at the bottom of the tank for draining condensation.
• Wheels and Handle: For easy transport of the unit.

Khazikitsa

1. Kutsegula ndi Kuyendera: Carefully remove the compressor from its packaging. Inspect for any visible damage that may have occurred during transit. Report any damage to the supplier immediately.
2. Msonkhano (ngati pakufunika): Attach the wheels and handle using the provided hardware. Ensure all bolts are securely tightened.
3. Initial Oil Check: Before first use, verify the oil level in the pump. The compressor may be shipped without oil or with a minimal amount. Refer to the oil sight glass or dipstick. If necessary, fill with appropriate compressor oil (typically SAE 30 non-detergent) to the indicated level.
4. Kuyika: Position the compressor on a firm, level surface in a well-ventilated area. Ensure there is adequate space around the unit for air circulation.
5. Kulumikiza Magetsi: Connect the compressor to a grounded electrical outlet with the correct voltage (230 Volts) and circuit protection. Avoid using extension cords if possible; if necessary, use a heavy-duty, grounded extension cord rated for the compressor's power requirements.

Malangizo Ogwiritsira Ntchito

1. Kuyambira Compressor:
   • Ensure the drain valve at the bottom of the tank is closed.
   • Plug the compressor into the power outlet.
   • Flip the ON/OFF switch to the 'ON' position. The compressor will start to build pressure until it reaches its maximum cut-off pressure (10 bar).
2. Kusintha Kuthamanga kwa Output:
   • Turn the pressure regulator knob clockwise to increase pressure and counter-clockwise to decrease pressure.
   • Monitor the regulated pressure gauge to set the desired working pressure for your air tool.
3. Kulumikiza Zida za Air:
   • Attach your air hose to the quick connect coupler.
   • Connect your air tool to the other end of the hose.
4. Kutseka:
   • Flip the ON/OFF switch to the 'OFF' position.
   • Unplug the compressor from the power outlet.
   • Depressurize any air remaining in the hose and tool.
5. Kutulutsa Condensation: After each use, or at least daily, open the drain valve at the bottom of the tank to release any accumulated moisture. This prevents rust and extends the tank's lifespan.

Kusamalira

Regular maintenance ensures optimal performance and longevity of your compressor.

• Tsiku ndi Tsiku:
  • Chotsani madzi oundana kuchokera mu thanki ya mpweya.
  • Check oil level (if applicable, for oil-lubricated models).
• Weekly/Every 10 Hours of Use:
  • Inspect air filter for dirt and debris. Clean or replace if necessary.
  • Yang'anani ngati pali phokoso kapena kugwedezeka kwachilendo.
• Monthly/Every 50 Hours of Use:
  • Inspect all fasteners for tightness.
  • Check safety valve operation (briefly pull the ring to ensure it releases air).
• Annually/Every 200 Hours of Use:
  • Change compressor oil (if applicable).
  • Inspect pressure switch and gauges for proper function.
• Posungira: When storing the compressor for extended periods, ensure the tank is drained of all moisture and store in a dry, protected area.

Kusaka zolakwika

If you encounter problems not listed here or if solutions do not resolve the issue, please contact ABAC customer support or a qualified service technician.

Zofotokozera

Chitsimikizo ndi Thandizo

ABAC products are manufactured to high quality standards and are guaranteed against manufacturing defects. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official ABAC webmalo.

For technical assistance, spare parts, or service inquiries, please contact your authorized ABAC dealer or customer support. When contacting support, please have your product model and serial number ready.

Mutha kupeza zambiri komanso zolumikizana nazo pa ABAC Store on Amazon.