Intermec PC43TB01100201 Thermal Transfer/Direct Thermal Desktop Printer User Manual

1. Mawu Oyamba

This manual provides essential information for the safe and efficient operation of your Intermec PC43TB01100201 Thermal Transfer/Direct Thermal Desktop Printer. This printer is designed for various label printing applications, offering both thermal transfer and direct thermal printing capabilities at 203 dpi resolution. It features an LCD display for easy navigation, a tear-off function, a real-time clock, and multiple connectivity options including USB 2.0, two USB host ports, and LAN.

Figure 1: Intermec PC43TB01100201 Thermal Transfer/Direct Thermal Desktop Printer. This image shows the compact desktop printer with its LCD display and label output slot.

2. Zambiri Zachitetezo

Please read all safety instructions before operating the printer to prevent injury or damage to the device. Keep this manual for future reference.

• Gwiritsani ntchito chingwe chamagetsi chokha chomwe chili ndi chosindikizira.
• Musaike chosindikizira pamalo amadzi kapena chinyezi chochuluka.
• Onetsetsani kuti chosindikizira chayikidwa pamalo okhazikika komanso osalala.
• Pewani kutsekereza mipata ya mpweya wabwino.
• Disconnect power before cleaning or servicing the printer.
• Do not attempt to open or repair the printer yourself. Refer to qualified service personnel.

3. Zamkatimu Phukusi

Onetsetsani kuti zinthu zonse zilipo mu phukusi:

• Intermec PC43TB01100201 Printer Unit
• US Power Cord
• Quick Start Guide (osaphatikizidwe m'bukuli)
• Software/Driver CD (may vary by package)

4. Kukhazikitsa

4.1 Kutsegula ndi Kuyika

1. Chotsani chosindikizira mosamala pamapaketi ake.
2. Place the printer on a flat, stable surface with adequate ventilation.
3. Ensure easy access to power outlets and computer ports.

4.2 Mphamvu yolumikizira

1. Connect the supplied US power cord to the printer's power input.
2. Lumikizani mbali ina ya chingwe chamagetsi pamalo olowera magetsi.

4.3 Kulumikiza ku Kakompyuta

The PC43TB01100201 printer supports USB and LAN connectivity.

• Kulumikizana kwa USB: Connect a USB cable (not always included) from the printer's USB 2.0 port to an available USB port on your computer.
• Kulumikizana kwa LAN: Connect an Ethernet cable (not always included) from the printer's LAN port to your network router or switch.

4.4 Loading Media (Labels/Ribbon)

Refer to the printer's internal diagrams or quick start guide for specific instructions on loading labels and, if using thermal transfer, the ribbon. Ensure the media is correctly aligned for proper printing.

• Tsegulani chivundikiro chosindikizira.
• Place the label roll onto the media supply spindle.
• Feed the labels through the media guides.
• If using thermal transfer, install the ribbon according to the printer's instructions.
• Tsekani chivundikiro chosindikizira.

5. Malangizo Ogwiritsira Ntchito

5.1 Kuyatsa/Kuzimitsa

• Kuyatsa: Press the power button located on the printer. The LCD display will illuminate.
• Kuzimitsa: Press and hold the power button until the printer shuts down.

5.2 Kugwiritsa ntchito chiwonetsero cha LCD

The LCD display provides status information and allows for configuration changes. Navigate through menus using the control buttons (Push Button Controller Type) adjacent to the display.

• View printer status and error messages.
• Adjust settings such as print darkness, speed, and media type.
• Perform calibration for new media rolls.

5.3 Kusindikiza

Once the printer is connected to your computer and drivers are installed, you can print labels from compatible software applications. The printer supports Latin fonts.

1. Open your label design software or application.
2. Create or open the label design.
3. Select the Intermec PC43TB01100201 as your printer.
4. Adjust print settings as needed (e.g., number of copies, print quality).
5. Initiate the print job.

The printer features a tear-off function for easy label separation after printing.

6. Kusamalira

6.1 Kuyeretsa Printer

Kuyeretsa nthawi zonse kumathandiza kuti chosindikizira chikhale chabwino komanso kumawonjezera nthawi ya moyo wa chosindikizira.

• Kusindikiza: Clean the printhead with an alcohol swab or printhead cleaning wipe when print quality degrades or after every few media roll changes. Ensure the printer is off and cool.
• Chopukutira cha Platen: Clean the platen roller with an alcohol swab to remove adhesive residue or dust.
• Kunja: Pukuta kunja ndi chofewa, damp nsalu. Osagwiritsa ntchito zotsukira abrasive.

6.2 Replacing Media and Ribbon

Replace media rolls and thermal transfer ribbons as they run out. Follow the loading instructions in Section 4.4.

7. Mavuto

This section addresses common issues you might encounter. For more complex problems, contact Intermec support.

• Chosindikizira Sichikuyankha:
  • Yang'anani kugwirizana kwa magetsi.
  • Verify USB or LAN cable connections.
  • Yambitsaninso chosindikizira ndi kompyuta.
  • Ensure printer drivers are correctly installed.
• Zosindikiza Zosakwanira:
  • Clean the printhead (refer to Section 6.1).
  • Adjust print darkness settings via the LCD display or printer driver.
  • Ensure correct media type is selected.
  • Check if the ribbon (for thermal transfer) is correctly installed and not depleted.
• Labels Not Feeding Correctly:
  • Reload media, ensuring it is properly aligned in the guides.
  • Calibrate the printer for the loaded media type.
  • Check for any obstructions in the media path.
• LCD Display Error Messages:
  • Consult the printer's on-screen help or the full user manual for specific error code meanings and resolutions.

8. Zofotokozera

9. Chitsimikizo ndi Thandizo

For detailed warranty information, please refer to the documentation provided with your purchase or contact your reseller. Intermec provides support for its products.

• Wopanga: Zolemba
• Nambala Yachitsanzo: PC43TB01100201
• For technical assistance, visit the official Intermec support webtsamba kapena funsani makasitomala awo.