KORG STB1-BK Digital Piano Stand Instruction Manual

Mawu Oyamba

Zikomo pogulaasing the KORG STB1-BK Digital Piano Stand. This stand is specifically designed to complement your KORG B1 or B2+ Digital Piano, providing a stable and aesthetically pleasing support structure. It elevates your digital piano to a standard playing height, enhancing your musical experience. This manual provides essential information for safe assembly, proper use, and maintenance of your stand.

Zambiri Zachitetezo

Werengani mosamala malangizo onse musanagwiritse ntchito.
Onetsetsani kuti zigawo zonse zilipo ndipo sizinawonongeke musanayambe kusonkhana.
Konzani choyimiliracho pamalo ofewa komanso oyera kuti musakhwime.
Gwiritsani ntchito zida zomwe zaperekedwa zokha popangira.
Osawonjeza zomangira, chifukwa izi zitha kuwononga zinthu.
Ensure the stand is placed on a level, stable surface before placing the digital piano on it.
Do not allow children to climb on or play with the stand.
Nthawi ndi nthawi yang'anani zomangira zonse kuti zitsimikizire kuti zimakhala zolimba.

Zamkatimu Phukusi

Chonde onetsetsani kuti zigawo zonse zotsatirazi zikuphatikizidwa mu phukusi lanu:

Left Leg Panel (1)
Right Leg Panel (1)
Rear Cross Panel (1)
Mounting Screws (Quantity as specified in hardware pack)
Assembly Instructions (This document)

Note: A cross-point (Phillips head) screwdriver is required for assembly and is not included.

Kukhazikitsa ndi Assembly

Follow these steps to assemble your KORG STB1-BK Digital Piano Stand. It is recommended to have a second person assist during the final placement of the digital piano.

Tulutsani Zigawo: Carefully remove all parts from the packaging and lay them out on a soft, clean surface to prevent damage. Identify the Left Leg Panel, Right Leg Panel, and Rear Cross Panel.
Attach Rear Cross Panel to Leg Panels: Align the pre-drilled holes on the ends of the Rear Cross Panel with the corresponding holes on the inner sides of the Left and Right Leg Panels. Use the provided mounting screws and a cross-point screwdriver to securely fasten the panels together. Ensure the stand forms a stable, rectangular structure. Do not overtighten.

Image: Illustration of the stand's components being assembled. The leg panels are connected by the rear cross panel, forming the base structure.
Ikani Choyimilira: Once assembled, carefully lift the stand and place it in your desired location. Ensure the floor surface is level and stable to prevent wobbling.
Place the Digital Piano: With assistance, carefully lift your KORG B1 or B2+ Digital Piano and align it with the top edges of the assembled stand. Gently lower the piano onto the stand, ensuring it sits securely and evenly. The stand is designed to cradle the piano, providing a snug fit.

Image: The KORG STB1-BK stand fully assembled with a KORG digital piano placed on it, ready for use.

Malangizo Ogwiritsira Ntchito

The KORG STB1-BK stand is designed for passive support of your digital piano. Once assembled and the piano is placed, no further operational steps are required for the stand itself.

Ensure the digital piano is centered and stable on the stand before use.
Avoid leaning heavily on the stand or applying excessive force, as this may compromise stability.
If moving the piano and stand, always lift both components carefully, preferably with assistance, to prevent damage or injury.

Kusamalira

To ensure the longevity and appearance of your KORG STB1-BK Digital Piano Stand, follow these simple maintenance guidelines:

Kuyeretsa: Wipe the stand regularly with a soft, dry cloth to remove dust. For stubborn marks, a slightly damp cloth with mild soap can be used, followed by drying thoroughly. Avoid abrasive cleaners or solvents.
Kuwona kwa Fastener: Periodically (e.g., every 6 months) check all assembly screws to ensure they are still tight. Retighten if necessary, but do not overtighten.
Zachilengedwe: Avoid placing the stand in direct sunlight or near heat sources, as this can cause material degradation or discoloration. Maintain a stable room temperature and humidity.

Kusaka zolakwika

If you encounter any issues with your KORG STB1-BK Digital Piano Stand, refer to the following common problems and solutions:

Vuto	Chifukwa Chotheka	Yankho
Stand wobbles after assembly.	Osafanana pansi pamwamba. Screws not fully tightened. Components not aligned correctly during assembly.	Move the stand to a level surface or use shims under the legs if necessary. Check and retighten all assembly screws. Disassemble and reassemble, ensuring all parts are correctly aligned.
Screw does not go all the way in.	Misaligned screw hole. Cross-threaded screw. Obstruction in the hole.	Remove the screw, realign the components, and try again. Ensure the screw is inserted straight. If cross-threaded, try a different screw hole if available, or contact support. Check for any debris in the hole.
Digital piano does not sit securely on the stand.	Piano not centered. Stand not fully assembled or damaged. Incorrect piano model for the stand.	Adjust the piano's position until it is centered and stable. Inspect the stand for any loose connections or damage. Verify that your digital piano is a KORG B1 or B2+ model.

Zofotokozera

Chitsanzo: STB1-BK
Mtundu: Wakuda
Zofunika: Wood
Makulidwe a Zamalonda (L x W x H): 51.65 x 13.23 x 24.92 mainchesi (131.2 x 33.6 x 63.3 cm)
Kulemera kwa chinthu: 18.48 mapaundi (8.4kg)
Msonkhano Wofunika: Inde
Mitundu Yogwirizana: KORG B1, KORG B2+ Digital Pianos

Chitsimikizo ndi Thandizo

For warranty information and customer support, please refer to the warranty card included with your product or visit the official KORG website. If you require assistance with assembly, troubleshooting, or have questions about your STB1-BK Digital Piano Stand, please contact KORG customer service.

Ofesi ya KORG Webtsamba: www.korg.com

	Buku Loyambira Mwachangu la Korg XE20/XE20SP Digital Ensemble Piano Yambani ndi piyano yanu ya digito ya Korg XE20/XE20SP. Buku loyambira mwachangu ili likufotokoza zofunikira pakukhazikitsa, ntchito zoyambira, mawonekedwe, ndi njira zodzitetezera kuti musangalale ndi nyimbo nthawi yomweyo.
	Korg Liano LIVE! Manual del Usuario: Piano Digital para Transmisión en Directo Descubra cómo utilizar el Korg Liano LIVE!, un piano digital todo en uno diseñado para la transmisión en directo. Este manual del usuario proporciona instrucciones detalladas sobre sus funciones, conexiones y configuración.
	Buku la Oyimilira Piyano ya Digito ya Korg SP-500 Onani mawonekedwe ndi ntchito za Korg SP-500 Digital Piano ndi buku la malangizo la mwini wake. Dziwani zambiri zokhudza kusankha mawu, kutsagana ndi nyimbo zokha, kujambula, ndi zina zambiri.
	Buku Lophunzitsira la Korg XE20/XE20SP Digital Ensemble Piano Buku lothandizira la Korg XE20 ndi XE20SP Digital Ensemble Pianos, lomwe limafotokoza za kukhazikitsa, ntchito, masitayelo, nyimbo, makonda, kulumikizana, ndi kuthetsa mavuto.
	Korg C-303/C-505 Concert Piano Service Manual \| Technical Guide Comprehensive service manual for Korg C-303 and C-505 Concert Piano models. Includes specifications, circuit diagrams, parts lists, and maintenance information.
	KORG SGX-2 Collection: Owner's Manual Explore the KORG SGX-2, a premium grand piano software synthesizer from the KORG Collection. This comprehensive owner's manual guides you through installation, features, effects, MIDI control, and more for Mac and PC users, detailing its rich piano sounds and advanced capabilities.

KORG STB1-BK