1. Mawu Oyamba
This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Legrand LEG97605 300W Non-Flush Rotary Dimmer Switch. Please read this manual thoroughly before installation and use, and retain it for future reference.
The Legrand LEG97605 is a 300W dimmer switch designed for surface mounting, featuring a rotary button for light intensity control and an integrated push-button for ON/OFF functionality. It is suitable for 1-way circuit applications.
Chithunzi 1: Patsogolo view of the Legrand LEG97605 Dimmer Switch.
2. Zofunika Zachitetezo
WARNING: RISK OF ELECTRIC SHOCK. Always turn off power at the circuit breaker or fuse box before installing or servicing this device. Improper installation can result in serious injury or death.
- Kuyika kuyenera kuchitidwa ndi katswiri wamagetsi wodziwa bwino ntchito kapena motsatira malamulo amagetsi am'deralo.
- Musapitirire kuchuluka kwa wattagmlingo wa 300W.
- Onetsetsani kuti mawaya onse ndi otetezeka komanso otetezedwa bwino.
- Chipangizochi chapangidwa kuti chizigwiritsidwa ntchito m'nyumba basi.
- Do not use with incompatible load types (e.g., certain LED drivers, fluorescent fixtures) unless specified by the manufacturer.
3. Zamkatimu Phukusi
Onetsetsani kuti zigawo zonse zilipo musanayambe kukhazikitsa:
- Legrand LEG97605 300W Non-Flush Rotary Dimmer Switch (1 unit)
- Mounting Screws (Quantity may vary)
- Buku Lophunzitsira (Chikalatachi)
Figure 2: Legrand LEG97605 Dimmer Switch as packaged.
4. Malangizo oyika
Follow these steps carefully to install your dimmer switch:
- Zimitsani Mphamvu: Locate the circuit breaker or fuse controlling the light fixture you intend to dim. Switch it to the OFF position. Verify power is off using a voltage tester musanapitirize.
- Konzani Malo Okwera: The LEG97605 is a non-flush, surface-mount dimmer. Choose a suitable wall location for mounting.
- Wiring:
- Identify the live (line) wire and the load wire (to the light fixture).
- Connect the incoming live wire to the terminal marked 'L' or 'Input' on the dimmer switch.
- Connect the wire going to the light fixture (load wire) to the terminal marked 'Load' or 'Output' on the dimmer switch.
- Ensure all connections are tight using the screw terminals.
- Kukwera: Secure the dimmer switch to the wall surface using the provided mounting screws. Ensure it is firmly attached and level.
- Bwezerani Mphamvu: Kuyika kukamaliza ndipo maulumikizidwe onse ali otetezeka, yatsaninso mphamvu pa chophwanyira dera.
Chithunzi 3: Pamwamba view of the dimmer switch, illustrating potential wiring points.
5. Operating Your Dimmer Switch
The Legrand LEG97605 dimmer switch features a rotary knob for dimming and an integrated push-button for ON/OFF control.
- To Turn ON/OFF: Press the rotary knob firmly. You will hear a click, and the light will turn on or off.
- To Dim/Brighten: Rotate the knob clockwise to increase light intensity and counter-clockwise to decrease light intensity.
Chithunzi 4: Chopindika view highlighting the rotary control knob.
6. Kusamalira
Your Legrand dimmer switch requires minimal maintenance.
- Kuyeretsa: To clean the surface of the dimmer, wipe with a soft, damp nsalu. Musagwiritse ntchito zotsukira zowawasa, zosungunulira, kapena mankhwala amphamvu, chifukwa izi zitha kuwononga kumaliza.
- Kuyendera: Periodically inspect the switch for any signs of damage or loose connections. If any issues are found, turn off power and consult a qualified electrician.
7. Mavuto
If you experience issues with your dimmer switch, refer to the following common problems and solutions:
| Vuto | Chifukwa Chotheka | Yankho |
|---|---|---|
| Kuwala sikuyatsa. | No power to the switch; incorrect wiring. | Check circuit breaker/fuse. Verify wiring connections are correct and secure. |
| Light does not dim or dims poorly. | Incompatible bulb type; minimum load not met. | Ensure all connected bulbs are dimmable. Check if the total wattage of bulbs meets the dimmer's minimum load requirement (if any). |
| Kuwala kumawala kapena kumamveka. | Loose wiring connection; incompatible bulb type; electrical interference. | Turn off power and check all wire connections. Replace bulbs with high-quality dimmable types. Consult an electrician if problem persists. |
| Dimmer feels hot to the touch. | Overload or improper wiring. | Turn off power immediately. Verify total connected wattage does not exceed 300W. Consult a qualified electrician. |
Ngati vutoli likupitirira mutayesa njira izi, funsani chithandizo cha makasitomala a Legrand kapena katswiri wamagetsi wodziwa bwino ntchito.
8. Mafotokozedwe aukadaulo
| Mbali | Tsatanetsatane |
|---|---|
| Mtundu | Legrand |
| Nambala ya Model | LEG97605 |
| Operation Mode | CHOKHA |
| Mawerengedwe Apano | 10 Amps |
| Wattage | 300 Watts |
| Contact Type | Nthawi zambiri Open |
| Mtundu Wolumikizira | Zomangira |
| Pokwerera | Sikirini |
| Mtundu Wozungulira | 1-njira |
| Mtundu wa Actuator | Rotary |
| Mtundu Wowongolera | Dinani batani |
| Contact Material | Mkuwa |
| Mlingo wa Chitetezo Padziko Lonse | IP54 |
| Mtundu Wokwera | Surface Mount |
| Mtundu | Choyera |
| Kulemera kwa chinthu | 2.46 pawo |
| Tsiku Loyamba Likupezeka | Seputembara 25, 2015 |
9. Chitsimikizo ndi Thandizo la Makasitomala
For warranty information, technical assistance, or to report a problem, please contact Legrand customer support. Refer to the official Legrand webtsamba kapena phukusi la zinthu kuti mudziwe zambiri zamakono zolumikizirana.
Legrand Official Webtsamba: www.legrand.us
