AMS F5962

Buku Logwiritsira Ntchito Wotchi Yoyendetsedwa ndi Wayilesi ya AMS F5962

Chithunzi cha F5962

1. Mawu Oyamba

Thank you for choosing the AMS F5962 Radio-Controlled Wall Clock. This manual provides essential information for the proper setup, operation, and maintenance of your new clock. Please read these instructions carefully before use and retain them for future reference.

2. Zamalonda Zathaview

The AMS F5962 is a radio-controlled wall clock featuring an antique-style beige dial with dark brown Arabic numerals. Its painted metal housing ensures durability, and the radio-controlled movement provides accurate timekeeping by automatically synchronizing with a time signal.

AMS F5962 Radio-Controlled Wall Clock front view

Chithunzi 1: Patsogolo view of the AMS F5962 Radio-Controlled Wall Clock, showcasing its antique-style beige dial and dark brown Arabic numerals.

3. Zamkatimu Phukusi

Please check the package contents upon unpacking. Ensure all items are present and undamaged.

4. Kukhazikitsa

4.1 Kuyika kwa Battery

  1. Pezani batire kumbuyo kwa wotchi.
  2. Insert one AA (or specified type) battery, ensuring the correct polarity (+/-) as indicated inside the compartment.
  3. Tsekani chivundikiro cha chipinda cha batri bwinobwino.

Zofunika: Use only the recommended battery type. Remove depleted batteries promptly to prevent leakage.

4.2 Initial Time Synchronization

After battery installation, the clock will automatically attempt to receive the radio time signal.

  1. Place the clock near a window or in an open area, away from electronic devices that may cause interference.
  2. The hands will typically move to the 12 o'clock position and then begin searching for the signal.
  3. This process can take several minutes to several hours, depending on signal strength and location. Once the signal is received, the clock will automatically set itself to the correct time.

Zindikirani: If the clock does not set itself after a few hours, try repositioning it or manually initiating a signal search if your model has that feature (refer to troubleshooting).

4.3 Kuyika Wotchi

The AMS F5962 is designed for indoor wall mounting.

  1. Choose a suitable location on an indoor wall, ensuring it is sturdy enough to support the clock's weight (approximately 1.22 kg).
  2. Install a nail or wall anchor with a screw, ensuring it protrudes sufficiently (at least 2 cm) to securely hold the clock.
  3. Hang the clock using the hanging mechanism on the back.
AMS F5962 Wall Clock with dimensions

Figure 2: The AMS F5962 Wall Clock showing its approximate dimensions of 32cm diameter. The overall product dimensions are 35.4 x 35.2 x 7.4 cm.

5. Malangizo Ogwiritsira Ntchito

Once set up, the AMS F5962 operates automatically.

6. Kusamalira

6.1 Kuyeretsa

Kuti muyeretse wotchi, pukutani pamwamba pake pang'onopang'ono ndi nsalu yofewa komanso youma. Musagwiritse ntchito zotsukira zowononga, zosungunulira, kapena zopopera mankhwala, chifukwa izi zitha kuwononga kumaliza kapena zigawo zamkati.

6.2 Kusintha kwa Battery

When the clock hands stop moving or the time becomes inaccurate, it is likely time to replace the battery.

  1. Chotsani batire lakale mu chipindacho.
  2. Insert a new, fresh battery of the correct type (e.g., AA), observing polarity.
  3. The clock will then attempt to re-synchronize with the radio signal as described in Section 4.2.

Chidziwitso Chachilengedwe: Please dispose of used batteries responsibly according to local regulations.

7. Mavuto

VutoChifukwa ChothekaYankho
Clock hands do not move or stop.Batire yatha.Bwezerani batire ndi yatsopano.
Clock does not set to the correct time.
  • Weak or no radio signal.
  • Kusokoneza zamagetsi zina.
  • Incorrect time zone setting (if applicable, though this model is typically automatic).
  • Move the clock to a different location, preferably near a window and away from electronic devices.
  • Allow several hours for the clock to receive the signal.
  • Ensure the battery is fresh.
Time is incorrect after DST change.Clock did not receive the DST signal.
  • The clock should automatically adjust. If not, try removing the battery for a few minutes and reinserting it to force a re-synchronization.
  • Ensure the clock is in a location with good signal reception.

8. Zofotokozera

MtunduAMS
Nambala ya ModelF5962
Mtundu WowonetseraAnalogi
Mbali YapaderaRadio-Controlled Time Synchronization
ZakuthupiPainting Metal
MtunduBeige (dial), Brown (housing)
MtunduZakale
Miyeso Yazinthu35.4 x 35.2 x 7.4 cm (Overall); Case diameter 32cm
Kulemera kwa chinthu1.22kg pa
Gwero la MphamvuYoyendetsedwa ndi Battery
Kugwiritsa Ntchito M'nyumba / PanjaM'nyumba

9. Chitsimikizo ndi Thandizo

For warranty information or technical support, please refer to the documentation provided with your purchase or contact your retailer. You may also visit the official AMS website kuti thandizo lina.

Zolemba Zofananira - F5962

Preview Malangizo Ogwiritsira Ntchito Clock ya Khoma ya AMS
Malangizo ogwiritsira ntchito mawotchi a pakhoma a AMS, okhudza kuyika batri, kusintha, ndi kugwiritsa ntchito nthawi zonse m'zilankhulo zambiri.
Preview Buku la Adapter Board la ams AS5600L Eval Kit
Bukuli limapereka chidziwitso chokwanira cha bolodi la adaputala la ams AS5600L-WL_EK_AB, kuphatikiza zomwe zili mu kit, kufotokozera kwa bolodi, malangizo oyika, tsatanetsatane wa pinout, magwiridwe antchito a I2C mode, zojambulajambula za hardware, kapangidwe ka PCB, ndi zambiri zoyitanitsa.
Preview Buku Logwiritsira Ntchito la ams AS5048 14-bit Rotary Position Sensor
This user manual provides detailed information on the ams AS5048, a 14-bit rotary position sensor with digital angle and PWM output. It covers the AS5048 adapter board, mounting, pinout, operation cases (SPI, Daisy Chain), firmware coding examples, and hardware schematics. Essential for engineers integrating this sensor into their systems.
Preview Buku Lothandizira Kuwunika Bodi la Adapter la ams AS5048
This manual details the ams AS5048 Adapter Board (AS5048-EK-AB), an evaluation kit for the AS5048 magnetic position sensor. It covers hardware, operation modes (SPI, I2C), software examples, and contact information for ams AG.
Preview Malangizo Ogwiritsira Ntchito Clock ya AMS ndi Buku Lothandizira Kusintha Mabatire
Malangizo ogwiritsira ntchito ndikusintha batri mu mawotchi a AMS, ndi malangizo azilankhulo zosiyanasiyana.
Preview Buku Lothandizira Kuwunika Bodi la Adapter la ams AS5048
User manual for the ams AS5048 Adapter Board Evaluation Kit (AS5048-EK-AB), detailing its features, pinout, mounting, operation cases (SPI modes), hardware schematics, PCB layout, and contact information.