EHEIM MINIUP Shallow Water Filter (Model 2204020) User Manual

1. Mawu Oyamba

This manual provides essential instructions for the safe and efficient operation, installation, and maintenance of your EHEIM MINIUP Shallow Water Filter, Model 2204020. This internal filter is designed for use in small aquariums, particularly those with shallow water levels, to ensure optimal water quality.

2. Malangizo a Chitetezo

• Werengani malangizo onse mosamala musanagwiritse ntchito.
• Onetsetsani kuti voltage indicated on the filter matches your local power supply.
• Always disconnect the power supply before performing any maintenance, cleaning, or when handling the filter.
• Musagwiritse ntchito fyuluta ngati chingwe chamagetsi kapena pulagi yawonongeka.
• The filter is designed for indoor use in aquariums only. Do not use it for other purposes.
• Khalani kutali ndi ana.
• Ensure the filter is fully submerged in water during operation. Running dry can damage the motor.

3. Zamkatimu Phukusi

Tsimikizirani kuti zigawo zonse zilipo muzopaka:

• EHEIM MINIUP Shallow Water Filter unit
• Filter media (filter sponges)
• Makapu okoka oti muyike
• Buku la malangizo

4. Kukhazikitsa

4.1 Kutsegula ndi Kuyendera

Carefully remove all components from the packaging. Inspect the filter for any visible damage. If damage is found, do not proceed with installation and contact your retailer.

4.2 Filter Media Installation

1. Open the filter housing according to the diagrams provided in the separate quick start guide (if applicable).
2. Insert the provided filter sponges into the designated compartments. Ensure they are seated correctly to allow proper water flow.
3. Tsekani bwino chitseko cha fyuluta.

4.3 Placement in Aquarium

The EHEIM MINIUP filter is designed for internal use. Position the filter inside the aquarium, ensuring it is fully submerged in water. Use the provided suction cups to securely attach the filter to the aquarium glass. The filter can be placed vertically or horizontally, depending on your aquarium's water level and desired flow direction.

Image 1: EHEIM MINIUP Shallow Water Filter unit. This image shows the compact design of the filter, suitable for small aquariums.

4.4 Kukhazikitsa koyamba

1. Once the filter is securely placed and fully submerged, connect the power plug to a suitable electrical outlet.
2. The filter should start operating immediately, circulating water.
3. Observe the filter for a few minutes to ensure proper operation and check for any unusual noises or leaks.

5. Malangizo Ogwiritsira Ntchito

5.1 Kuyatsa/Kuzimitsa

To turn the filter on, plug the power cord into an electrical outlet. To turn it off, disconnect the power cord from the outlet.

5.2 Kusintha kwa Mtengo Woyenda

The EHEIM MINIUP filter features an adjustable flow rate. A control knob, typically located on the top of the filter unit, allows you to regulate the water flow intensity. Turn the knob clockwise to increase flow and counter-clockwise to decrease flow, adjusting it to suit the needs of your aquarium inhabitants and plant life.

6. Kusamalira

Regular maintenance is crucial for the longevity and efficient operation of your EHEIM MINIUP filter. Always disconnect the filter from the power supply before performing any maintenance.

6.1 Cleaning the Filter Media

The filter sponges should be cleaned regularly, typically every 2-4 weeks, depending on the aquarium's bioload. Rinse the sponges thoroughly in old aquarium water (removed during a water change) to preserve beneficial bacteria. Do not use tap water directly, as chlorine can harm these bacteria.

6.2 Cleaning the Impeller and Pump Housing

Periodically, or if you notice reduced flow, the impeller and its housing should be cleaned. Disassemble the filter unit, carefully remove the impeller, and clean any debris or mineral buildup from the impeller and the impeller chamber using a small brush. Reassemble all parts securely.

6.3 Filter Media Replacement

Filter sponges should be replaced every 3-6 months, or when they show signs of significant wear and tear, to maintain optimal filtration performance. When replacing, consider staggering the replacement of sponges to avoid removing all beneficial bacteria at once.

7. Mavuto

• No Water Flow / Reduced Flow:
      a. Check if the filter is plugged in and receiving power.
      b. Disconnect power and check for blockages in the intake, impeller, or outlet.
      c. Clean the impeller and impeller chamber as described in Section 6.2.
      d. Ensure filter media is not excessively clogged; clean or replace if necessary.
• Phokoso Lambiri:
      a. Disconnect power and check if the impeller is properly seated and free of debris.
      b. Ensure the filter is securely attached to the aquarium glass and not vibrating against other objects.
      c. Check for air trapped inside the filter; gently tilt the filter to release air bubbles.
• Filter Not Sticking to Glass:
      a. Clean the suction cups and the aquarium glass surface where the filter is to be attached.
      b. Replace worn or hardened suction cups if necessary.

8. Zofotokozera

9. Chitsimikizo ndi Thandizo

EHEIM products are covered by a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official EHEIM website for detailed warranty terms and conditions. For technical support or spare parts, contact EHEIM customer service or your authorized dealer.