1. Mawu Oyamba
This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your DEWALT DXH75KT 75,000 BTU Kerosene Forced Air Heater. This rugged heater is designed for use in well-ventilated construction sites, barns, warehouses, and workshops, providing powerful heat output.
Key features include a two-piece split barrel for easier cleaning and maintenance, an ergonomic handle for transport, recessed controls to minimize damage, and continuous electronic ignition for reliable starting.

Image 1.1: DEWALT DXH75KT 75,000 BTU Kerosene Forced Air Heater.
2. Zambiri Zachitetezo
WARNING: READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE USING THIS HEATER. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN FIRE, EXPLOSION, SERIOUS INJURY, OR DEATH.
- FOR OUTDOOR USE ONLY OR IN EXTREMELY WELL-VENTILATED AREAS. This heater consumes oxygen and produces carbon monoxide. Adequate ventilation is critical to prevent carbon monoxide poisoning. Never use in enclosed residential spaces, bedrooms, or living rooms.
- Always use Kerosene (K-1) as the fuel. Never use gasoline, benzene, alcohol, or any other highly flammable liquids.
- Maintain proper clearances from combustible materials. Refer to the product labels for specific distances.
- Osasiya chotenthetsera chilibe choyang'anira pamene mukugwira ntchito.
- Sungani ana ndi ziweto kutali ndi chotenthetsera.
- Ensure the heater is placed on a stable, level, non-combustible surface.
- Musatseke malo olowera mpweya kapena malo otulutsira utsi.
- Katunduyu ali ndi mankhwala omwe amadziwika ndi Boma la California kuti amayambitsa khansa ndi zilema zobadwa nazo kapena kuvulaza kwina kobereka (Chenjezo la 65).
3. Zigawo Zathaview
The DEWALT DXH75KT heater consists of the following main components:
- Heater Barrel: Houses the burner and fan assembly.
- Tanki Yamafuta: Located at the base, holds kerosene fuel.
- Gawo lowongolera: Features recessed controls for power and temperature adjustment.
- Ergonomic Handle: Kuti zinthu zinyamulidwe mosavuta komanso kuti zinyamulidwe mosavuta.
- Chingwe cha Mphamvu: For electrical connection (110 Volts).

Image 3.1: DEWALT DXH75KT Kerosene Heater in a work environment.
4. Kukhazikitsa
Follow these steps to set up your heater:
- Tulutsani ndikuwunika: Carefully remove the heater from its packaging. Inspect for any shipping damage. If damaged, do not operate and contact customer support.
- Msonkhano: Some minor assembly may be required, typically attaching the handle. Refer to the included assembly guide for detailed steps.
- Kuyika: Place the heater on a firm, level surface in a well-ventilated area. Ensure adequate clearance from walls, ceilings, and combustible materials as specified in the safety warnings.
- Kuwotcha: Unscrew the fuel cap. Using a clean funnel, carefully fill the tank with K-1 Kerosene only. Do not overfill. The fuel gauge will indicate the level. Securely replace the fuel cap.
- Kulumikiza Magetsi: Plug the heater's power cord into a grounded 110-Volt electrical outlet. If an extension cord is necessary, ensure it is rated for outdoor use and has sufficient gauge for the heater's power requirements.

Image 4.1: Dimensions of the DEWALT DXH75KT Kerosene Heater.
5. Malangizo Ogwiritsira Ntchito
To operate your DEWALT Kerosene Heater:
- Ensure Fuel and Power: Verify the fuel tank is adequately filled with K-1 Kerosene and the heater is properly plugged into a 110-Volt grounded outlet.
- Yatsani: Locate the power switch on the control panel and switch it to the 'ON' position. The fan will start, and the continuous electronic ignition system will initiate the burner.
- Sinthani Kutentha: Use the thermostat control knob to set the desired heat output. The heater will cycle on and off to maintain the set temperature.
- Kuyang'anira: Observe the heater during initial operation to ensure proper functioning. The flame should be stable and consistent.
- Tsekani: To turn off the heater, switch the power switch to the 'OFF' position. Allow the fan to run for a few minutes to cool down the unit before unplugging or moving.
6. Kusamalira
Regular maintenance ensures optimal performance and longevity of your heater:
- Kuyeretsa: The two-piece split barrel design allows for easier access for cleaning. Regularly clean the exterior of the heater and ensure air intake and exhaust areas are free from dust and debris.
- Zosefera Mafuta: Periodically check and clean or replace the fuel filter to prevent clogs and ensure consistent fuel flow.
- General Inspection: Before each use, inspect the power cord for damage, check for any fuel leaks, and ensure all components are securely fastened.
- Posungira: When storing the heater for extended periods, ensure the fuel tank is empty and clean. Store in a dry, safe location away from children and flammable materials.
7. Mavuto
Ngati mukukumana ndi zovuta ndi chotenthetsera chanu, yang'anani ku zovuta zotsatirazi ndi zothetsera:
| Vuto | Chifukwa Chotheka | Yankho |
|---|---|---|
| Heater sayamba kapena kuyatsa. | No power, no fuel, clogged fuel filter, ignition issue. | Check power connection, ensure fuel in tank, clean/replace fuel filter, contact service if ignition fails. |
| Kutentha kochepa. | Low fuel, clogged fuel filter, improper thermostat setting. | Refill fuel, clean/replace fuel filter, adjust thermostat to a higher setting. |
| Utsi wochuluka kapena fungo loipa. | Incorrect fuel type, poor ventilation, dirty burner. | Ensure K-1 Kerosene is used, improve ventilation, clean burner components. |
For persistent issues or complex repairs, contact qualified service personnel.
8. Zofotokozera
- Mtundu: CHIKHALIDWE
- Chitsanzo: DXH75KT (also known as F340675)
- Kutulutsa Kutentha: 75,000 BTU
- Mtundu wa Mafuta: Palafini (K-1)
- Voltage: 110 volts
- Zapadera: Kusintha Kutentha
- Kugwiritsa Ntchito M'nyumba / Panja: Outdoor (or well-ventilated construction sites, barns, warehouses, and workshops)
- Makulidwe a Zamalonda: 14.25"D x 32.37"W x 17.12"H
- Mtundu Wokwera: Phiri la Pansi
- Kuphimba Kutentha: Approximately 1875 square feet
- Mtundu wa Burner: Wowala
- Kukhazikitsa Kutentha Kochepa: 25 madigiri Fahrenheit
- Kusintha kwa Kutentha Kwambiri: 95 madigiri Fahrenheit
- Msonkhano Wofunika: Inde
- Zophatikiza: Mr. Heater F340675: Dewalt 75,000 Btu Forced Air Kerosene Heater
- Wopanga: Mr. Heater Corporation
9. Chitsimikizo
This DEWALT DXH75KT Kerosene Forced Air Heater comes with a 1-year warranty. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the warranty documentation included with your product or contact the manufacturer.
10. Thandizo
For technical assistance, replacement parts, or any questions not covered in this manual, please contact DEWALT customer support or visit their official website. Always provide your product model number (DXH75KT or F340675) when seeking support.





