Seti Yokhazikitsa ya Eheim 2 - Mbali Yopanikizika - 594 (4005310) Buku Lophunzitsira

Mawu Oyamba

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Eheim Installation Set 2 - Pressure Side, model 594 (part number 4005310). This set is designed to optimize the return water diffusion from your aquarium filter, creating various flow patterns and surface agitation. Please read these instructions carefully before use to ensure proper function and longevity of the product.

Zida Zopangira

The Eheim Installation Set 2 includes the following components:

Spray bar sections
Elbow connectors
Straight connectors
Chipewa chakumapeto
Makapu okoka oti muyike
Adapter ya hose

Eheim Installation Set 2 components in packaging

Chithunzi 1: Eheim Installation Set 2 components as packaged. This image displays the various parts included in the set, such as spray bar sections, connectors, and suction cups, alongside the product box.

Chithunzi 2: Assembled Eheim Installation Set 2 spray bar. This image shows the spray bar fully assembled with its various sections, elbow, and suction cups, ready for installation.

Malangizo a Chitetezo

Always disconnect power to all aquarium equipment before performing any installation or maintenance.
Onetsetsani kuti malumikizidwe onse ndi otetezeka kuti asatayike.
This product is designed for use with aquarium filters on the pressure (return) side only.
Khalani kutali ndi ana.
Osasintha mankhwala mwanjira ina iliyonse yomwe sinafotokozedwe m'bukuli.

Kukhazikitsa ndi Kuyika

Kukonzekera: Ensure your aquarium filter is turned off and disconnected from power.
Msonkhano: Connect the spray bar sections using the provided straight and elbow connectors. The modular design allows for various lengths and angles to suit your aquarium dimensions and desired flow pattern. Ensure all connections are firmly seated.
Kugwirizana kwa Hose: Attach the appropriate hose adapter to one end of the assembled spray bar. Connect this adapter to the return hose from your external aquarium filter. This set is designed for installation on the return side of the filter.
Kuyika: Place the assembled spray bar inside your aquarium. Use the suction cups to securely mount the spray bar to the aquarium glass. Position it to achieve optimal water distribution and surface agitation. The spray bar can be rotated to direct the water flow.
Kuwona Komaliza: Once installed, ensure all connections are tight and the spray bar is securely mounted. Reconnect power to your filter and observe the water flow.

Zindikirani: The spray bar can be configured to diffuse water across the surface for increased oxygenation or directed downwards for deeper water circulation.

Malangizo Ogwiritsira Ntchito

The Eheim Installation Set 2 operates passively by diffusing the filtered water returned from your aquarium filter. Once installed and the filter is running, water will exit through the small holes along the spray bar.

Water Flow Direction: The spray bar can be rotated within its mounts to adjust the direction of the water jets. This allows you to direct flow towards the surface for aeration or deeper into the tank for circulation.
Surface Agitation: Directing the spray bar towards the water surface will create ripples, enhancing gas exchange and oxygen levels in the aquarium.
Kayendedwe ka Madzi: Directing the spray bar slightly downwards or horizontally will improve water circulation throughout the tank, helping to distribute nutrients and prevent stagmagawo a nant.

Kusamalira

Regular maintenance ensures optimal performance and prevents blockages.

Kuyeretsa pafupipafupi: Inspect the spray bar monthly for algae or debris buildup. Clean as needed, or during routine filter maintenance.
Kusokoneza: Disconnect the spray bar from the filter hose and remove it from the aquarium.
Njira Yoyeretsera: The spray bar sections can be separated. Use a soft brush or pipe cleaner to remove any algae or detritus from inside the tubes and from the spray holes. The end cap is removable for easier access to the interior for cleaning.
Kukonzanso: After cleaning, reassemble the spray bar sections, ensuring all connections are secure. Reinstall in the aquarium as per the Setup instructions.

Kusaka zolakwika

Vuto	Chifukwa Chotheka	Yankho
Reduced water flow from spray bar	Algae or debris blocking spray holes. Filter flow rate is low. Hose kinked or obstructed.	Clean the spray bar and holes (see Maintenance). Check and clean your aquarium filter. Inspect the filter return hose for kinks or blockages.
Spray bar detaches from glass	Suction cups are old or dirty. Insufficient number of suction cups used.	Clean suction cups and aquarium glass thoroughly. Replace worn suction cups if necessary. Ensure all provided suction cups are used and properly secured.
Madzi amatuluka kuchokera kumagulu	Connections not fully seated. Damaged O-rings or connectors.	Disassemble and reassemble connections, ensuring they are pushed together firmly. Inspect O-rings and connectors for damage; replace if necessary.

Zofotokozera

Mtundu	Eheim
Nambala ya Model	4005310 (also known as 594, Item Model Number 6675)
Makulidwe azinthu (zosonkhanitsidwa)	Pafupifupi mainchesi 1 x 1 x 7.5 (2.54 x 2.54 x 19.05 cm)
Kulemera kwa chinthu	0.35 mapaundi (5.6 ounces)
Kugwirizana	Designed for return side of aquarium filters, typically with 5/8" ID tubing.
Zakuthupi	Durable aquarium-safe plastic

Chitsimikizo ndi Thandizo

For warranty information or technical support regarding your Eheim Installation Set 2, please refer to the documentation provided with your original purchase or contact Eheim customer service directly. Contact details can typically be found on the Eheim official webmalo kapena katundu phukusi.

Wopanga: TopDawg Pet Supply (as per product listing)

Eheim 6675