1. Mawu Oyamba
The FIBOCOM FG132-GL is a high-performance 5G RedCap Sub-6 GHz wireless communication module designed specifically for Internet of Things (IoT) applications. This module supports 3GPP Release 17 RedCap technology, offering robust dual-mode 5G and 4G LTE connectivity. It is ideal for integration into industrial routers, industrial PCs, IP cameras, IoT gateways, and fixed wireless access terminals, providing reliable and efficient wireless communication.
2. Zamalonda Zathaview
2.1 Zofunika Kwambiri
- Dual-mode support for 5G RedCap and 4G LTE.
- Low latency and low power consumption optimized for 5G IoT.
- Rich functionality interfaces to expand application scenarios.
- Supports 5G SA networks and backward compatibility with 4G.
- Caters to 5G private networks and slicing requirements.
- Standard MiniPCIe PIN layout for easy integration.
- Integrated GNSS receiver for positioning services.
- Supports Fibocom Enhanced AT Commands for flexible control.
- Compatible with Linux, Windows, and Android operating systems.
Gawo la 2.2 Views
3. Zofotokozera
The following table details the technical specifications of the Fibocom FG132 MiniPCIe Series module:
| Gulu lazinthu | Mbali | FG132-GL-00 MiniPCIe (Global) |
|---|---|---|
| Basic Features | Phukusi | MiniPCIe |
| kukula (mm) | 30*51*2.7 | |
| Magetsi | 3.3V ~ 4.3V (Typical 3.6V) | |
| Kutentha Kusiyanasiyana | Operation: -35°C ~ +75°C, Extended: -40°C ~ +85°C | |
| Magulu a Network | 5G NR SA Bands | N1/2/3/5/7/8/12/14/18/20/25/26/29/30/38/40/41/48/66/70/71/77/78 |
| Mabungwe a LTE | B1/2/3/4/5/7/8/12/13/14/17/18/19/20/25/26/28/30/34/38/39/40/41/42/43/48/66/71 | |
| LTE-HRPUE | B38/40/41/42/43 | |
| Kutumiza kwa Data | 5G SA Sub-6 (256QAM) | 223Mbps (DL) / 123Mbps (UL) |
| LTE (256QAM) | 195Mbps (DL) / 75Mbps (UL) | |
| Ntchito | Ndondomeko | TCP/UDP/NITZ/HTTP/PING/HTTPS/SSL/FILE/MQTT/CoAP/LwM2M |
| FOTA | DFOTA | |
| Oyendetsa OS | Linux/Windows/Android | |
| VoNR/VoLTE | Inde | |
| GNSS | Inde | |
| eSIM | Zosankha | |
| Zolumikizirana | SIM | Inde |
| USB | USB 2.0 | |
| UART | Inde | |
| PCM | Inde | |
| I2C | Inde | |
| Zitsimikizo | Chitsimikizo | FCC/CE/GCF/PTCRB/RoHS/HAC/TSCA |
| Malamulo | GCF/GBRC/NAL/ROHS | |
| Thandizo la Opaleshoni | Supported Operators | T-Mobile*/Verizon*/AT&T* |
4. Kuyika ndi Kukonzekera
The FG132-GL module is designed for internal installation in devices equipped with a MiniPCIe slot. Please follow these general steps for installation:
- Kuzimitsa Chipangizo: Ensure the host device (e.g., industrial router, PC) is completely powered off and disconnected from all power sources before beginning installation.
- Access MiniPCIe Slot: Tsegulani mosamala casing of your host device to access the internal MiniPCIe slot. Refer to your device's manual for specific instructions on how to open it.
- Ikani Module: Align the FG132-GL module with the MiniPCIe slot. Gently push the module into the slot at an angle until it is fully seated.
- Chitetezo Module: Once seated, push the module down and secure it with the retaining screws or clips provided by your host device.
- Lumikizani Antennas: Connect the appropriate antennas to the module's connectors. The module features three connectors: "MAIN", "GPS", and "DIV".
- WAMKULU: Primary cellular antenna.
- GPS: GNSS antenna for positioning services.
- DIV: Diversity/Auxiliary cellular antenna.
- Tsekani Casing: Carefully close and secure the casing of your host device.
- Ikani Madalaivala: After physical installation, power on your device. You will need to install the necessary drivers for the FG132-GL module. Drivers are available for Linux, Windows, and Android operating systems. Refer to Fibocom's official support resources for the latest drivers and installation guides.
5. Ntchito
Once the FG132-GL module is correctly installed and its drivers are loaded, it will provide 5G/4G LTE cellular connectivity and GNSS positioning capabilities to your host device.
- Kukonzekera kwa Netiweki: Configure your network settings through the operating system of your host device. This typically involves selecting the cellular modem, setting up APN (Access Point Name) details, and enabling mobile data.
- AT Commands: For advanced configuration, diagnostics, and control, the module supports Fibocom Enhanced AT Commands. Refer to the Fibocom AT Command Set documentation for detailed instructions on using these commands.
- GNSS Functionality: The integrated GNSS receiver provides location data. Ensure a GPS antenna is connected to the "GPS" connector for optimal performance. Location services can be accessed via the host device's operating system or specific applications.
6. Kusamalira
The FG132-GL module is designed for reliable operation with minimal maintenance. To ensure longevity and optimal performance:
- Zachilengedwe: Operate the module within its specified temperature range (-35°C to +75°C, extended -40°C to +85°C) and avoid excessive humidity or direct exposure to liquids.
- Kuyang'ana Kwathupi: Periodically inspect the module and antenna connections for any signs of damage or loose connections, especially if the host device is in a high-vibration environment.
- Zosintha pa Mapulogalamu: Keep the module's firmware and drivers updated. Check Fibocom's official website for the latest releases to benefit from performance improvements and bug fixes.
7. Mavuto
If you encounter issues with your FG132-GL module, consider the following troubleshooting steps:
- Palibe Network Network:
- Verify that the module is correctly seated in the MiniPCIe slot.
- Ensure all antenna cables (MAIN, DIV) are securely connected.
- Check if the SIM card is properly inserted and active.
- Confirm that the correct drivers are installed and recognized by the operating system.
- Verify network settings, including APN, in your host device's OS.
- Test with a different SIM card or in a different location to rule out network coverage issues.
- Palibe chizindikiro cha GNSS:
- Ensure the GPS antenna is securely connected to the "GPS" connector.
- Confirm the GPS antenna is placed in a location with a clear view wa kumwamba.
- Check if location services are enabled in your host device's OS.
- Module Not Detected:
- Re-seat the module in the MiniPCIe slot.
- Ensure the MiniPCIe slot on your host device is functional.
- Check device manager (Windows) or equivalent (Linux/Android) to see if the module is listed, even with errors.
- Ensure the host device's BIOS/UEFI settings allow for MiniPCIe devices.
For persistent issues, consult the detailed technical documentation from Fibocom or contact their support.
8. Malangizo Ogwiritsa Ntchito
Ngakhale palibe yeniyeni wosuta reviews or Q&A were provided, general tips for using cellular modules like the FG132-GL include:
- Ubwino wa Antena: Invest in high-quality antennas suitable for 5G/4G LTE and GNSS frequencies to maximize signal strength and reliability.
- Kasamalidwe ka Kutentha: Ensure adequate airflow around the module, especially in enclosed industrial environments, to prevent overheating and maintain optimal performance.
- Kukhazikika Kwamagetsi: Provide a stable power supply within the specified voltage range (3.3V ~ 4.3V) to avoid unexpected behavior or damage.
9. Chitsimikizo ndi Thandizo
9.1 Chidziwitso cha Chitsimikizo
The FIBOCOM FG132-GL module comes with a 12-month manufacturer's limited warranty. This warranty covers defective items but excludes items damaged and/or misused after receipt. Please retain your proof of purchase for warranty claims.
9.2 Thandizo laukadaulo
For technical assistance, driver downloads, firmware updates, and detailed documentation (such as AT Command Set), please visit the official Fibocom website or contact your vendor's support channel. When contacting support, please have your module's model number (FG132-GL) and serial number (S/N) ready.
