Fibocom NL952-EAU Series LTE Module User Manual

1. Mawu Oyamba

This manual provides detailed instructions and specifications for the Fibocom NL952-EAU series of 4G M.2 LTE wireless communication modules. The series includes the NL952-EAU-10-01 (CAT18) and NL952-EAU-20-00 (CAT12) variants, designed for high-speed data transmission and integrated positioning capabilities.

These modules are suitable for a wide range of applications, including Customer Premises Equipment (CPE), gateways, smart TVs, Virtual Reality (VR) devices, drones, and other non-PC industrial applications.

2. Zamalonda Zathaview

The Fibocom NL952-EAU series modules are high-performance M.2 form factor wireless communication solutions. They offer robust connectivity and advanced features for demanding applications.

2.1 Zofunika Kwambiri

• Fomu Factor: M.2
• Gulu la LTE: CAT18 (NL952-EAU-10-01) and CAT12 (NL952-EAU-20-00)
• Zambiri Zothamanga:
  • NL952-EAU-10-01: Up to 1200 Mbps Downlink (DL) / 150 Mbps Uplink (UL)
  • NL952-EAU-20-00: Up to 600 Mbps Downlink (DL) / 150 Mbps Uplink (UL)
• Global Band Support: Comprehensive coverage for LTE FDD, LTE TDD, and WCDMA bands across EMEA, APAC, Australia, Korea, and Japan (excluding B11, B21).
• Integrated GNSS: Supports GPS, GLONASS, Galileo, and BeiDou for accurate positioning.
• Zolumikizira: USB3.0/2.0, PCIe2.0, GPIO, UIM, I2S, MIPI.
• Ntchito: VoLTE, SMS, Audio, FOTA (Firmware Over-The-Air).
• Thandizo la OS: Compatible with Linux and Android operating systems.

3. Zofotokozera

The following tables provide detailed technical specifications for the Fibocom NL952-EAU series modules.

3.1 Zofunika Kwambiri

3.2 Key Functions & Performance

3.3 Supported Functions

Mapangidwe a 3.4

3.5 Certification

Note: NA indicates 'Not Applicable' or 'Not Available'. '●' indicates supported feature.

4. Kukhazikitsa

The Fibocom NL952-EAU series modules utilize an M.2 form factor, designed for easy integration into compatible host devices. Proper installation is crucial for optimal performance.

4.1 Njira zoyika

1. Konzani Chipangizo Chothandizira: Ensure your host device (e.g., router, industrial PC, gateway) is powered off and disconnected from any power source.
2. Pezani M.2 Slot: Identify the M.2 slot on your host device's motherboard. Refer to your host device's manual for the exact location and type of M.2 slot (e.g., Key B for WWAN modules).
3. Ikani Module: Gently align the Fibocom NL952-EAU module with the M.2 slot. Insert the module at a 30-degree angle into the slot until the gold contacts are fully seated.
4. Secure the Module: Push the module down towards the motherboard. Secure it with the screw provided by your host device manufacturer.
5. Lumikizani Antennas: Attach the appropriate LTE/GNSS antennas to the module's antenna connectors. Ensure a secure connection. Refer to the module's diagram for correct antenna placement (e.g., M1, M2, D/G).
6. Install SIM Card (if applicable): If your host device has a SIM card slot connected to the M.2 module, insert a valid SIM card.
7. Yatsani: Reassemble your host device, connect the power source, and power it on.

Important: Always handle the module by its edges to avoid electrostatic discharge (ESD) damage. Use appropriate ESD precautions.

5. Malangizo Ogwiritsira Ntchito

Once installed, the Fibocom NL952-EAU module will typically be managed by the host device's operating system and software.

5.1 Kuyika Madalaivala

• For Linux and Android-based systems, ensure the necessary drivers are installed. These are usually provided by the host device manufacturer or can be obtained from Fibocom's official support channels.
• Verify driver installation through your operating system's device manager or command-line tools.

5.2 Kusintha Kwapaintaneti

• Configure network settings (e.g., APN, authentication details) within your host device's operating system or application.
• Ensure the module is recognized and enabled by the system.
• Monitor network status indicators provided by your host device or application.

5.3 GNSS Functionality

• If using GNSS, ensure the GNSS antenna is properly connected and has a clear view wa kumwamba.
• Access GNSS data through compatible software or APIs on your host device.

6. Malangizo Ogwiritsa Ntchito

• Kuyika kwa Antenna: For optimal signal strength, ensure external antennas are placed away from obstructions and metallic surfaces.
• Kuwongolera Kutentha: While designed for industrial temperatures, ensure adequate airflow around the module, especially in enclosed systems, to prevent overheating during prolonged high-speed operation.
• Zosintha za Firmware: Regularly check for firmware updates from Fibocom or your host device manufacturer to ensure optimal performance, security, and compatibility.

7. Kusamalira

The Fibocom NL952-EAU module is designed for reliable operation with minimal maintenance. However, adhering to basic care practices can prolong its lifespan and ensure consistent performance.

• Khalani Oyera: Ensure the module and its connectors are free from dust and debris. Use compressed air or a soft, dry brush for cleaning if necessary.
• Zachilengedwe: Operate the module within its specified temperature range (-30°C to +70°C) and avoid excessive humidity.
• Kuyang'ana Kwathupi: Periodically inspect the module for any signs of physical damage, loose connections, or corrosion.

8. Mavuto

If you encounter issues with your Fibocom NL952-EAU module, consider the following troubleshooting steps:

• Palibe Network Network:
  • Verify SIM card insertion and activation.
  • Check antenna connections.
  • Ensure drivers are correctly installed and the module is enabled in the operating system.
  • Tsimikizirani kuti zokonda za APN ndizolondola.
  • Test with a different SIM card or in a known working M.2 slot if possible.
• Kuthamanga kwa Deta Pang'onopang'ono:
  • Check signal strength. Weak signal can lead to reduced speeds.
  • Ensure antennas are properly positioned and not obstructed.
  • Verify that the module is operating on the expected LTE category (CAT18 or CAT12) and bands.
  • Yang'anani ngati pali kudzaza kwa netiweki m'dera lanu.
• GNSS Not Working:
  • Ensure the GNSS antenna is connected and has a clear view wa kumwamba.
  • Verify GNSS software/API configuration on the host device.
• Module Not Detected:
  • Ensure the module is correctly seated in the M.2 slot.
  • Check the host device's BIOS/UEFI settings to ensure the M.2 slot is enabled.
  • Tsimikizirani mphamvu zamagetsi ku module.

For persistent issues, consult the technical documentation provided by Fibocom or contact your device manufacturer's support.

9. Chitsimikizo ndi Thandizo

For specific warranty terms and conditions, please refer to the documentation provided by your seller or the official Fibocom website. Typically, warranty covers manufacturing defects under normal use.

For technical support, driver downloads, and further documentation, please visit the official Fibocom webfunsani kwa wogulitsa malonda anu kapena funsani kwa wogulitsa malonda anu.

Return Policy Note: If purchased from a reseller, defective products may be eligible for exchange within a specified return period (e.g., 30 days from order date). Return processing may take up to 7 business days, and the buyer may be responsible for return shipping fees. This is a return policy and not a warranty statement; please consult your seller for full warranty details.