Robinson Large Pendant
Chithunzi cha TOB5752
MALANGIZO OTHANDIZA
TOB 5752 Robinson Large Pendant
CHidziwitso:
Kuwala kumeneku kumayenera kukhazikitsidwa motsatira malamulo onse oyenera, oyikapo, komanso ndi munthu wodziwa ntchito yomanga ndi kuigwiritsa ntchito, komanso zoopsa zomwe zingachitike. Yang'anani mosamala zinthu ndi zomwe zili mkati. Ngati kuwonongeka kapena vuto likupezeka, musayike.
Sungani zinthu zonse zoyikapo mpaka kuyika kukamaliza ndikuvomerezedwa.
Zida ZOFUNIKIRA (OSATI KUPHATIKIZAPO):
Phillips Screwdriver Zolumikizira Zogulitsa Zolumikizana Zingwe Zopanda Ma waya |
Wobalidwa Woyeserera Kupima Tepi |
Chain Pliers Odulira Waya |
- Chotsani mosamala mbali zonse m'bokosi. Ikani pamalo oyera, ofewa.
- Remove mounting plate (A) from canopy (D) by removing canopy screws (C).
- Ikani mbale zoyikira (A) m'bokosi lolumikizirana ndikutetezedwa ndi zomangira (B).
- Determine desired overall length, and amount of chain (F) needed.
Kufupikitsa unyolo pogwiritsa ntchito pliers. (Sungani unyolo wowonjezera) - Attach chain (F) to canopy hook (E) and fixture loop (G).
- Thread fixture wire and ground wire through chain (F) and canopy (D).
ZINDIKIRANI: When you reach the canopy (D), ensure there is no tension on the wires. Cut excess wires, being sure to leave about 12” to reach the junction box. - Gwirani mbali ziwiri za waya wopangidwa, ndi kutchinjiriza kwa 5/8 ″ iliyonse.
- Wrap fixture ground wire (bare copper) around the green grounding screw (see diagram 1). Tighten. Continue fixture ground wire and connect to supply ground wire (usually green or bare copper) using wire nut (M).
ZINDIKIRANI: Ndikofunikira kuti pulogalamuyo ikhale yokhazikika. - Connect fixture neutral wire (ribbed) to the supply neutral wire (usually white) using wire nut (M).
- Connect fixture hot wire (smooth with markings) to the supply hot wire (usually black) using wire nut (M).
Chenjezo: Osatembenuza maulumikizidwe otentha komanso osalowerera. - Onetsetsani kuti mawaya onse ndi othina, kenaka lowetsani mosamala mubokosi lolumikizirana.
- Install canopy (D) to mounting plate (A) by securing with canopy screws (C).
- Remove socket ring (K) and rubber washer (J) from socket (H), then install glass shade (I) to socket (H) and secure with rubber washer (J) and socket ring (K) using provided wrench (L).
ZINDIKIRANI: Do not overtighten otherwise shade could become damaged. - Insert light bulb into the sockets.
Malangizo Othandiza: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents..
Zolemba / Zothandizira
![]() |
VISUAL COMFORT TOB 5752 Robinson Large Pendant [pdf] Buku la Malangizo TOB 5752, Robinson Large Pendant, TOB 5752 Robinson Large Pendant, TOB 5752 Large Pendant, TOB 5752 Pendant, Large Pendant, Pendant |