SLVICVELKGA Victoria Velvet Bed
Buku Lophunzitsira
VICTORIA VELVET BED MFUMU
SLVICVELKGA, SLVICVELKEA, SLVICVELKNA
SLVICVELKGA Victoria Velvet Bed
ZOKHUDZA
KUCHITA
Khwerero 1: Align the two holes of the bracket on the side rail (C) with the end of the headboard (A). Insert and tighten a 30mm M8 screw (1) through each hole of the bracket using the Allen key (6).
Once secured, attach the bracket on the other end of the side rail (C) to the footboard (B) the same way, then repeat with the other side rail (C) on the other side of the bed.
Khwerero 2: Attach the legs (F) to the corners of the bed, securing them onto the headboard (A), footboard (B) and side rails (C) using the 20mm M8 screws (2) and Allen key (6).
Khwerero 3: Insert the long slats (D) into the headboard (A) and footboard (B). Secure by inserting and tightening 25mm M8 screws (3) using the Allen key (6).
Step 4: Align the holes on the bottom supports (E) under the holes marked on the long slats (D). Insert and tighten 35mm M6 screws (4) through the holes using the Allen key (6). Insert and tighten a M6 nut (5) on the underside of the bottom supports (E) using the wrench (7).
Khwerero 5: Connect three short slats (G) using the single and double-sided caps (I, H) as shown below. This will create a slat assembly. Repeat this process until you have 13 slat
misonkhano.
Place and align one slat assembly’s single and double-sided caps (I, H) onto the bed with the marked dots on the side rail (C) and long slats (D).
Repeat with the remaining slat assemblies.
Mukufuna zambiri?
Tikukhulupirira kuti bukhuli lakupatsani
thandizo lofunikira pakukhazikitsa kosavuta.
Kwa kalozera waposachedwa kwambiri wazogulitsa zanu,
komanso thandizo lina lililonse lomwe mungafune,
mutu Intaneti kuti thandizani.kogan.com 
Zolemba / Zothandizira
 |
SHANGRI-LA SLVICVELKGA Victoria Velvet Bed [pdf] Wogwiritsa Ntchito SLVICVELKGA Victoria Velvet Bed, SLVICVELKGA, Victoria Velvet Bed, Velvet Bed, Bed |
