Buku la OPT7 Photon RGB ROCK LIGHTS Lamulo

OPT7 Photon RGB ROCK LIGHTS

ZOCHITIKA

• Lowetsani Voltage: DC 12V
• input Power:  Max 9 Watts per pod
• Mtundu wa LED: 6pcs – RGB per pod
• Ma Raw Lumens: 600 LM (4 Pods Combined)
• Waterproof: IP68 ; Max 9 Watts per pod
• Operating Temperature: -5- 120: DC 12V

ZINTHU ZONSE

REMOTE CONTROL & WHERE TO INSTALL

1. Mphamvu ON
2. Kusintha kwa Mtundu Wokha
3. Kuzimitsa
4. Speed +/- 8 Levels
5. Mode +/- 19 Mode
6. Dimmer 8 Levels
7. Color Selection 12 Colors

3 WAYS TO MOUNTTHE ROCK LIGHT POD

• STEPI 1
  Pali 3 unsembe njira inu kusankha, mukhoza amanena njira zotsatirazi kukhazikitsa.
  • OPTION 1  
    Use “Strong Magnets” for mounting as shown in Fig. 1
  • OPTION 2
    Use “Self-Drilling Screws” for mounting as shown in Fig. 2
  • OPTION 3
    Use “VHB Double-Sided Adhesive” for mounting as shown in Fig. 3
• CHOFUNIKA KUDZIWA: Before starting installation ,we recommend that all rock light pods be checked to ensure that all functions are working properly.
• STEPI 2
  Designate your mounting locations for each Rock Light Pods and the Control Box. (Refer to Page 3 for RECOMMENDED MOUNTING LOCATIONS)

  

• CHOFUNIKA KUDZIWA: Avoid hot surfaces and / or moving parts.
• STEPI 3
  Yambani kukhazikitsa ma LED Pods pagalimoto yanu. Ngati mawaya ena owonjezera awonekera panthawi yoyika, muyenera kugwiritsa ntchito zip-ties kuti muzimangirire pamodzi ndikumangirira waya pamalo olumikizirana kuti mawaya asagwedezeke kapena kuwonongeka.
• STEPI 4
  Once the pods and wires are all safely installed onto your vehicle, you can now begin to use your Photons! Feel free to share a review pamodzi ndi chithunzi cha makhazikitsidwe kuti ogwiritsa ntchito ena ngati inunso asangalale ndi OPT7 Off-Road nawonso! Thanthwe!
  CAUTION Rock Light Pods become extremely hot during use-keep away from any vehicle parts that may be damaged by exposure to high temperatures.

2 WAYS TO INSTALL THE CONTROL BOX

• STEPI 1
  As show below, connect all the Rock Light Pods to the control box with the included extension wires.

  
  CAUTION Avoid installation areas of the engine bay + heated surfaces.

• STEPI 2
  There are two ways to power the rock lights using a 12volt power supply. For details refer to the instructions below:
  • Yankho:
    EASY INSTALL ­ can be connected through a 12V cigarette lighter or charging port

    

  • Yankho:
    Expert Install ­ can be installed the fuse tap method, connect the positive wire to a 10amp switched fuse tap, next connect the open negative wire to ground any metal surface in the vehicle.|
    CHOFUNIKA KUDZIWA: Kugwirizana kwa mphindi 10amp zidzasokoneza zida ndikupangitsa kulephera koyambirira, onetsetsani kuti ndi 10amps kapena zochepa!

    
    Chenjezo: Please ensure that the Rock light pod/control box/wiring all are mounted in areas where will not exceed 85C or 185F.

If you are uncomfortable performing work of this nature yourself, then do not hesitate to consult a professional for help. Working with a vechicle’s electrical system can be hazardous to an unqualified individual. OPT7 is not liable for damages or personal injuries while installing this product. The installation guide is provided as assistance to reduce set up time.

Chodzikanira

Kuunikira kwa OPT7 sikuyenera kuvulaza kapena kuvulala kwanu mukamayika izi. Kukhazikitsa Guide kumapangidwa ngati chithandizo chochepetsera nthawi yakukhazikitsa. Kuunikira kwa OPT7 sikungakhale ndi udindo uliwonse pakukhazikitsa kosayenera. Ngati simukudziwa bwino galimoto yanu kapena simukudziwa zambiri zakukonzanso pambuyo pamsika, chonde pitani kuchipatala.

Zolemba / Zothandizira

OPT7 Photon RGB ROCK LIGHTS [pdf] Buku la Malangizo Photon RGB ROCK LIGHTS