H1 Smart Label Printer

Smart Label Printer

Chonde werengani bukuli mosamala musanagwiritse ntchito mankhwalawa.
01 Package Contents 02 Product Description 03 Operation Instructions 04 Installing App 05 Connecting and Printing 06 Maintenance 07 Safety Precautions 08 Specifications 09 Related Statements
Zamkatimu Zamkatimu

Wosindikiza wa Smart Label *1

Label Paper Roll * 1

USB Type-C Cable *1

Buku Loyambira Mwachangu * 1

Life-healing Manual *1
Mafotokozedwe Akatundu

Power Button Indicator Light

Opening Lever

Kulipiritsa Port

Green Green Red Red Blue Blue





Chipangizo Cholumikizidwa




Device Malfunction/Out of Paper




Device Turned on


Kukweza Fimuweya


Opaleshoni Malangizo

03-1 Basic Functions



Switch on Hold down the Power button for three seconds.


Gwirani pansi Mphamvu batani kwa masekondi atatu pamene chipangizo ali.

Print history Press the Power button once when the device is on.

Print a test page Double-press the Power button when the device is on.

03-2 Fitting Paper

Opening Lever
1 Press down the opening lever to open the paper compartment.

Print Side
Kutuluka Papepala
2 Fit the print paper into the compartment with the print side facing up, and the first label paper sticking out of the tear-off opening.
Mphamvu ya Mphamvu
3 Close the paper compartment cover. Press and hold the power button for three seconds to turn on the device.
Kuyika App
Before using this product, please download the “NIIM” APP first. You can download it from Google Play or Apple Store.
Design & Print APP easy to download and use
For more product use instructions, please refer to “NIIM” APP.
Sign in to NIM Me Help Center Hardware

Kulumikiza ndi Kusindikiza
1 Open your NIIM APP, and turn on Bluetooth according to instruction.
Yatsani Bluetooth
2 Tap the Device Connection Button on the upper left corner on the home page to connect to the smart label printer.
Notice: If a PIN code is required, input 0000 or 1234.
3 After the connection is complete, tap the “Painting Board” Button at the bottom of the home page to enter the editing page.

06-1 Charging Make sure the product and your hands are dry; plug the USB Type-C cable into the charging port, connect it to the power adapter (purchased separately), and turn on the power. When the battery is low, the indicator light will blink red. If you continue to print with low battery, the printer will be switched off. Please charge the battery to continue printing. The battery needs 2-3 hours to be fully charged. At least charge the battery once every 2 to 3 months to ensure its normal function.
For battery life reasons, printing while charging is not recommended.
Adaphatikiza Mphamvu

USB chingwe

Mtundu-C Port

Kulipiritsa Port
06-2 Cleaning Print Head and Roller Please clean the print head and roller if one of the following situations occurs:
Unclear printing. Noise during paper rolling. Foreign objects on the print head.
Clean the print head and roller in the following procedures: Switch off the power of the printer; Slide open the paper compartment and find the print head
(refer to the picture). Wait for the print head to cool down completely if you have recently printed; Rotate the roller and use an alcohol cotton swab (should be dry) to wipe the dust and stains off its surface; Use an alcohol cotton swab (should be dry) or a print head cleaning pen to wipe the dust or stains off the print head. Wait for 5-10 minutes for the alcohol to fully evaporate, and then close the paper compartment.
Sindikizani Mutu

Notices Make sure the device is switched off during cleaning; Avoid touching the print head with hand or metal objects;
do not scratch the print head, the roller or the surface of sensor with tools such as tweezers; Do not use gasoline, acetone or other organic solvents to clean the print head or the roller; Wait until the alcohol completely evaporates before switching on the power to continue printing; Always keep the surface of the sensor clean.
06-3 FAQs
QDo I need to enable permission to obtain location information?
ADue to Android’s requirement, you need to enable location to turn on the Bluetooth.
QWhat is a PIN code? ABased on the Android system, most default PIN codes
are `0000′; under special circumstances, they are `1234′ or 16 `0’s (0000000000000000).
QWhat to do if my search cannot find the printer? A1. Make sure your phone’s Bluetooth is turned on;
2. Restart the device or the App and then search again; 3. Turn off the Bluetooth on your phone and then turn it
QWhat to do if the Bluetooth connection fails? A1. Restart the device or the App and then search again;
2. Turn off the Bluetooth on your phone and then turn it on again.
QWhat to do if the printing is not clear? A1. Make sure you are using NIIMBOT label paper;
2. Press the power button once and print one page, and then print again;
3. Double-press the power button to print a test page, and then send a picture of the test page to our support team.
QWhat to do if I press “print” but no printing contents come out and the printer gives a “click-click” noise?
A1. Check if the label paper is fitted properly; the label paper should stick out 0.5cm of the device;
2. Check if the label paper or the thermal transfer ribbon is used up. Replace them if they are used up.
QWhat to do if the printing stops suddenly? AAddress the situation as per the error notice in the App.
QWhat to do if the print offset is misaligned? A1. Check if the size of the label paper fits the templates in
the App. 2. Adjust the print offset via the editing function in the App.
QWhat to do if the paper doesn’t roll properly? A1. Check if there are label paper or foreign objects on the
sensor of the paper feeder slot; 2. Check if the size of the label paper fits the template size
in the App;
3. Check if the paper type of the setup template is correct; 4. If all above are ruled out, then it’s the malfunction of the
probe; please contact our support team.

To ensure the proper functioning of the device and your safety, please read all the instructions and warnings in this manual carefully before using this product.

Osagawanitsa katunduyo popanda chilolezo. Zowonongeka sizingabwezedwe kapena kusinthanitsa.

Osapukuta mankhwala ndi mankhwala owononga kapena oyeretsa.

Osagwiritsa ntchito mankhwalawa pafupi ndi malo omwe ali ndi zinthu zomwe zimatha kuyaka monga malo opangira mafuta kapena malo osungira mafuta.

1. Please keep the product and accessories out of the reach of children or they must be used under the supervision and guidance of a guardian;
2. Turn off the power immediately when water gets into the product; 3. Turn off the power immediately in case of any product malfunction; 4. If you want to use a power adapter, always use one that is safe,
regulatory-compliant, and compatible; 5. Do not disassemble the product to replace the battery. Improper
operation may cause an explosion; 6. The battery contains special protection circuit and device, please
do not disassemble the battery without authorization, otherwise it may cause a short circuit or leakage. If electrolyte gets into your eyes, flush with water immediately and seek medical help; 7. Do not expose the product and the power adapter to high temperature or high humidity. Do not put them in water, otherwise a short circuit may occur and the battery may heat up, smoke, deform, damage, or even explode; 8. If smoke or smell comes from the product or the power adapter, please unplug the power adapter immediately and avoid any burns.

1. Please use NIIMBOT label paper to prevent print quality issues or print head damage;
2. The product comes with a built-in rechargeable battery. Do not throw it into fire or heat it. Do not charge, use or store it in a hot place, as this may cause overheating, fire or explosion.
1. If you store this product for a prolonged period, please recharge it every 3 months, otherwise it may lead to battery failure or even leakage, and then cause damage to the product;
2. Please use this product in a normal environment; high or low temperatures may cause issues such as lower print quality.




Zolemba Pepala



Makulidwe 106 * 40 * 64mm



Charging Time 2 – 3 hours


Kufotokozera: 5V DC, 1A

Mphamvu ya Battery 1000mAh

Printing Method Thermal printing

Kusanja Kusindikiza


Printing Width 12mm

Kulumikizana kwa Bluetooth 5.2



Transmit Power 4dBm(Maximum)

opaleshoni Kutentha

5 - 40

Zindikirani Zapadera
Wuhan Jingchen Intelligent ldentification Technology Ltd. is solely responsible for the revision and explanation of the manual, and endeavors to ensure that the contents of the manual are correct. Due to technology upgrades, products are subject to change without prior notice. Images of products, accessories, and the App in this manual are for illustrative purposes only and may be different from actual products.
Ndemanga Zogwirizana
FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Zosintha zilizonse zosavomerezedwa ndi chipani chomwe chimayang'anira kutsata kungachititse kuti wogwiritsa ntchitoyo asagwiritse ntchito zida zake.
Dziwani: Chida ichi chidayesedwa ndipo chapezeka kuti chikutsatira malire a chipangizo chamagetsi cha Class B, kutengera Gawo 15 la Malamulo a FCC. Malirewa adapangidwa kuti aziteteza moyenera kusokonezedwa ndi malo okhala. Chidachi chimapanga, chimagwiritsa ntchito ndipo chimatha kutulutsa mphamvu zamagetsi ndipo, ngati sichinaikidwe ndikugwiritsidwa ntchito mogwirizana ndi malangizo, zitha kusokoneza kuyankhulana kwawailesi.
Komabe, palibe chitsimikizo kuti kusokonezedwa sikungachitike pakukhazikitsa kwina. Ngati chipangizochi chikuyambitsa vuto pakulandila wailesi kapena wailesi yakanema, zomwe zingadziwike mwa kuzimitsa zida zonse, wogwiritsa ntchito amalimbikitsidwa kuti ayesere kusokoneza mwa njira imodzi kapena zingapo izi:
- Konzaninso kapena musunthe antenna yolandila.
- Wonjezerani kusiyana pakati pa zida ndi wolandila.
- Lumikizani zidazo muzogulitsira pa dera losiyana ndi lomwe wolandirayo walumikizidwa.
- Funsani wogulitsayo kapena waluso pa TV / TV kuti akuthandizeni.
Chipangizocho chayesedwa kuti chikwaniritse zofunikira zonse za RF. Chipangizocho chitha kugwiritsidwa ntchito poonekera popanda choletsa.
Declaration of conformity Hereby, Wuhan Jingchen Intelligent Identifification Technology Co., Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of Radio Equipment Directive (RED) 2014/53/EU. This product can be used across EU member states. This device can be used in European Union. Hereby, [Wuhan Jingchen Intelligent Identifification Technology Co., Ltd.] declares that the radio equipment type [NIIMBOT H1] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:http://www.niimbot.com.
Canadian Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) Chida ichi sichingayambitse kusokoneza.
(2) Chipangizochi chiyenera kuvomereza zosokoneza zilizonse, kuphatikiza zosokoneza zomwe zingayambitse kugwiranso ntchito kwa chipangizocho.
L'émetteur / récepteur isavomerezedwe chilolezo chokhala ndi zovala zogwirizana ndi CNR d'Innovation, Sayansi ndi Chitukuko cha Canada chomwe chimagwiritsa ntchito zida za wailesi zomwe sizingavomereze chilolezo. L'exploitation est autorisée aux deux zinthu suivantes:
(1) Zovala zodzitchinjiriza;
(2) L' appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d' en compromettre le fonctionnement.

Wuhan Jingchen Intelligent ldentificationTechnology Co., Ltd. Support Email : service@niimbot.com Official Website : www.niimbot.com Office Address : Creative Workshop No. 5 , Creative World, Yezhihu West Road, Hongshan District, Wuhan, China Production Address : No. 1, Tianyang Road, Chuanlong Avenue, Hengdian Street, Huangpi District, Wuhan City, Hubei Province, China
© 2022 NIIMBOT. All rights reserved. NIIMBOT is a brand under Wuhan Jingchen Intelligent ldentification Technology Ltd.

Zolemba / Zothandizira

NIIMBOT H1 Smart Label Printer [pdf] Buku Logwiritsa Ntchito
H1A, 2ARXB-H1A, 2ARXBH1A, H1 Smart Label Printer, H1, Smart Label Printer, Label Printer, Printer


Kusiya ndemanga

Anu email sati lofalitsidwa. Amafuna minda amalembedwa *