MAPEI 5LA510952 Grout Refresh 8-fl oz Acorn Ceramic-Porcelain Tile Grout Sealer Squeeze Bottle User Guide
Zamagetsi Zamalonda 568061410 Prismatic Commercial Led Wrap Light


UltraCare Grout Refresh is a nonflammable, ready-to-use, water-based,
polymer-modified colorant and sealer for grout joints. It can be applied onto and bonds to cement, epoxy, urethane and acrylic grouts


  • Allows grout to be changed to any UltraCare Grout Refresh color
  • Restores the look of tile grout
  • Seals to protect against most common stains
  • Available in MAPEI’s full palette of grout colors
  • Easy to apply and maintain
  • Creates a uniform colo


Green certification

  • Living Building Challenge (LBC) Red List Free: Izi zatsimikiziridwa ndi Red List waposachedwa kwambiri pa LBC's. Webmalo.


  • For interior/exterior use
  • For revitalizing old grout joints
  • For vertical and horizontal applications


  • Do not clean with solvent-based cleaners once UltraCare Grout Refresh has been applied.
  • Porous tile or natural stone may require sealing with one of MAPEI’s UltraCare penetrating sealers, to prevent UltraCare Grout Refresh from absorbing into the tile. Contact MAPEI’s Technical Services Department for recommendations.
  • Do not use in submerged areas, such as pools or hot tubs, or in areas subject to hydrostatic pressure.
  • Grout should be cured for at least 2 days before being treated with UltraCare Grout Refresh.
  • Use only when the substrate and ambient temperatures are between 50°F and 95°F (10°C and 35°C).
  • Not recommended for use over MAPEI’s Kerapoxy ® IEG CQ


  • Sanded grout joints
  • Unsanded grout joints
  • Epoxy grout joints
  • Acrylic grout joints
  • Urethane grout joints

Onani dipatimenti ya Technical Services ya MAPEI kuti mupeze malingaliro oyikapo pazagawo ndi mikhalidwe yomwe sinatchulidwe.


  • The substrate should be clean, dry and free of dust, dirt, oil, grease, paint, curing agents, concrete sealers, loosely bonded toppings, loose particles, and any other substance that may prevent or reduce adhesion.
  • Clean the surface using MAPEI’s UltraCare Heavy-Duty Stone, Tile & Grout Cleaner. Follow all label instructions for proper use and dilution rates.


Musanagwiritse ntchito, tsatirani njira zodzitetezera. Onani ku Safety Data Sheet kuti mudziwe zambiri.

  1. Gwedezani bwino musanagwiritse ntchito.
  2. If two or more units of the same color are to be used, blend the liquids together to ensure color consistency.


Read all installation instructions thoroughly before installation

  1. Apply UltraCare Grout Refresh in a thin coat; if applied too thickly, the product will not bond properly. Deposit a fine bead of UltraCare Grout Refresh into the middle of the grout joint, avoiding the tile surface as much as possible. Spread evenly using a fine paintbrush, toothbrush or grout stain applicator, working the colorant into the grout joint using a back-and-forth motion to allow the colorant to penetrate the grout.
  2. There are two different methods available for cleaning after applying UltraCare Grout Refresh. The “early wash method” should be used on smooth or polished surfaces with joints that are more flush/full. The “late wash method” should be used on textured tile surfaces that have slightly recessed grout joints.
    2a: Early wash method: Within 5 minutes of application, wipe the tile and grout in the same direction as the grout line with a slightly damp grout sponge to remove the excessive colorant from the tile surface. Flip the grout sponge over as needed. If colorant residue remains on the tile, mist a white or blue nylon pad with water and agitate over the surface. Buff dry with a paper towel or microfiber towel.
    2b: Late wash method: After the colorant has dried for 20 to 25 minutes, remove any colorant from the tile surface by lightly misting the tile with water and allowing it to stand for 5 minutes. Using a clean, damp microfiber towel, gently rub the tile surface to remove the colorant, avoiding the actual grout joint. Buff dry with a clean paper towel or microfiber towel and repeat the process, if needed, after 30 minutes. Change your wash water frequently when using UltraCare Grout Refresh on a larger area (more than 100 sq. ft. or 9.29 m2)
  3. If any colorant residue remains after 12 hours, remove t using a white scrubpad in a circular motion while avoiding the joints.
  4. UltraCare Grout Refresh needs 24 hours for an initial cure, depending on the type of grout onto which the colorant is applied.
  5. If grout appearance is being changed from a dark to ight color, more than 1 coat of UltraCare Grout Refresh may be required. Allow 1 to 2 hours between coats.
  6. Clean tools with water after each use


  • Protect from foot traffic for 2 hours.
  • Protect from water for 24 hours.
  • Avoid scrubbing or excessive cleaning of grout joints for 20 days to allow a full cure

Shelf Life and Application Properties

Zosungira moyo 2 years when stored in original, unopened packaging at73°F (23°C)
Kuyanika nthawi 30 kwa maminiti 120
VOCs (Rule #1168 of California’s SCAQMD) 42 g per L
Application temperature range 50 ° F mpaka 95 ° F (10 ° C mpaka 35 ° C)
 mitundu Available in MAPEI’s full palette of grout colors. Refer to MAPEI’s grout/caulk/colorant chart. Sample color chipsare available upon request.

Protect containers from freezing in transit and storage.



ottle: 8 U.S. oz. (mL)

Approximate Coverage* per 8 U.S. oz. (237 mL)

m'lifupi                                         Zolemba                                                                                 
1/4 ″ (6 mm) 50 to 300 sq. ft. (4.65 to 27.9 m2)
  • Coverage rate will vary based on application method, tile size, width of joint and porosity of grout.

Onani ma SDS kuti mudziwe zambiri zokhudzana ndi thanzi ndi chitetezo komanso kasamalidwe kazinthu.

For information on MAPEI’s commitment to sustainability and transparency, as well as how MAPEI products may contribute to green building standards and certification systems, contact (USA) or (Canada).

The contents of this Technical Data Sheet (“TDS”) may be copied into another project-related document, but the resulting document shall not supplement nor replace requirements per the TDS in effect at the time of the MAPEI product installation. For the most up-to-date TDS and warranty information, please visit our webtsamba a


Before using, the user must determine the n suitability of our products for the intended use,

We proudly support the following industry organizations:


MAPEI Likulu la North America

1144 East Newport Center Drive
Deerfield Beach, Florida 33442
1-888-US-MAPEI (1-888-876-2734) /
(954) 246-8888

Ntchito Zaukadaulo

1-800-992-6273 (US ndi Puerto Rico)
1-800-361-9309 ​​(Canada)

Thandizo lamakasitomala

1-800-42-MAPEI (1-800-426-2734)

Services ku Mexico

0-1-800-MX-MAPEI (0-1-800-696-2734)

Edition Date: March 23, 2022 MK 3000084 (22-1471)

MAPEL logo

Zolemba / Zothandizira

MAPEI 5LA510952 Grout Refresh 8-fl oz Acorn Ceramic-Porcelain Tile Grout Sealer Squeeze Bottle [pdf] Wogwiritsa Ntchito
5LA510952 Grout Refresh 8-fl oz Acorn Ceramic-Porcelain Tile Grout Sealer Squeeze Bottle, 5LA510952, Grout Refresh 8-fl oz Acorn Ceramic-Porcelain Tile Grout Sealer Squeeze Bottle, Acorn Ceramic-Porcelain Tile Grout Sealer Squeeze Bottle, Porcelain Tile Grout Sealer Squeeze Bottle, Tile Grout Sealer Squeeze Bottle, Grout Sealer Squeeze Bottle, Sealer Squeeze Bottle, Squeeze Bottle, Bottle


Kusiya ndemanga

Anu email sati lofalitsidwa. Amafuna minda amalembedwa *